Initial commit

machine/installed_machines/sim12_turn_2ax/cse_driver/fanuc/sim12_turn_2ax_fanuc-Main.ini

@@ -0,0 +1,16 @@
+#983=0 (specifies that this is a lathe)
+#3401=1 (specifies that G-Code system A should be used, where G99=feed per rev)
+
+(This part sets the position of the reference point G28)
+G54
+G18
+
+G10L52
+N1240P1R-136525
+N1240P2R933450
+N1240P3R1012825
+G11
+
+(Distance between turret center -> pocket device mount position)
+#100010=190.5
+

machine/installed_machines/sim12_turn_2ax/cse_driver/fanuc/sim12_turn_2ax_fanuc.py

@@ -0,0 +1,40 @@
+# 
+# Copyright (c) 2019 Siemens Industry Software Inc. 
+# Unpublished - All rights reserved 
+#
+# 
+#  
+# ================================================================
+
+import CSEWrapper
+import CSEFanuc
+from CSEWrapper import Vector3
+from CSEWrapper import ChannelState
+from CseFanuc_Methods import ControllerMethods
+from CseFanuc_Metacodes import ControllerMetacodes
+
+class Fanuc_sim12_Methods(ControllerMethods):
+    # Use this class to add machine specific methods. 
+    # DUMMY method shows exemplarily how to implement custom methods.
+    def DummyMethod(channel : ChannelState):
+        return True
+
+class Fanuc_sim12_Metacodes(ControllerMetacodes):
+    # Use this class to add machine specific metacodes. 
+    # DUMMY metacode shows exemplarily how to implement custom metacodes.
+    def DummyMetacode(channel : ChannelState):
+        return True
+
+class Controller(CSEFanuc.Controller):
+    def GetMethod(self, strMethodName : str):
+        return getattr(Fanuc_sim12_Methods, strMethodName, None)
+    def GetMetacode(self, strMetacodeName : str):
+        return getattr(Fanuc_sim12_Metacodes, strMetacodeName, None)
+
+def CreateController():
+    # For profiling
+    # return CSEWrapper.Controller(Fanuc.Controller(), "c:\\Temp\\cse_profile.txt")
+    return CSEWrapper.Controller(Controller())
+
+if __name__ == '__main__':
+    ctrl = CreateController()

machine/installed_machines/sim12_turn_2ax/cse_driver/fanuc/subprog/ToolChange.prg

@@ -0,0 +1,33 @@
+G0 G49
+
+(Set the tool change position values in metric X,Y,Z)
+#100001=533.400
+#100002=2114.500
+
+IF[71EQ#4006] GOTO 10
+IF[21EQ#4006] GOTO 10
+   #100001=#100001/25.4
+   #100002=#100002/25.4
+N10
+
+G0 G53 X[#100001] Z[#100002]
+
+##LANGUAGE AC
+  INT nToolID;
+  nToolID = getVariable("#4120");
+
+  IF (nToolID < 10);
+    move (AXIS, "TURRET", nToolID*360.0/6.0     -30, 1.0);
+  ELSE;
+    move (AXIS, "TURRET", nToolID*360.0/6.0/10.0-30+90, 1.0);
+  ENDIF;
+
+  STRING strCarrierTool;
+  strCarrierTool=getCarrierTool ("Turret", ITOS(nToolID));
+
+  setNextTool (strCarrierTool, "Turret");
+  activateNextTool ("Turret");
+##LANGUAGE NATIVE
+
+G43 H[#100020]
+M99

machine/installed_machines/sim12_turn_2ax/cse_driver/sinumerik/sim12_turn_2ax_sinumerik-Main.ini

@@ -0,0 +1,9 @@
+PMAC
+PGUD
+TO_INI
+CHAN_DATA
+G40 G17 G94 G90 G71 D0
+
+G54
+G450
+R102=190.5

machine/installed_machines/sim12_turn_2ax/cse_driver/sinumerik/sim12_turn_2ax_sinumerik.py

@@ -0,0 +1,39 @@
+# 
+# Copyright (c) 2019 Siemens Industry Software Inc. 
+# Unpublished - All rights reserved 
+#
+# 
+#  
+# ================================================================
+
+import CSEWrapper
+import CSES840D
+from CSEWrapper import ChannelState
+from CseS840D_Methods import ControllerMethods
+from CseS840D_Metacodes import ControllerMetacodes
+
+class S840D_sim12_Methods(ControllerMethods):
+    # Use this class to add machine specific methods. 
+    # DUMMY method shows exemplarily how to implement custom methods.
+    def DummyMethod(channel : ChannelState):
+        return True
+
+class S840D_sim12_Metacodes(ControllerMetacodes):
+    # Use this class to add machine specific metacodes. 
+    # DUMMY metacode shows exemplarily how to implement custom metacodes.
+    def DummyMetacode(channel : ChannelState):
+        return True
+
+class Controller(CSES840D.Controller):
+    def GetMethod(self, strMethodName : str):
+        return getattr(S840D_sim12_Methods, strMethodName, None)
+    def GetMetacode(self, strMetacodeName : str):
+        return getattr(S840D_sim12_Metacodes, strMetacodeName, None)
+
+def CreateController():
+    # For profiling
+    # return CSEWrapper.Controller(CSES840D.Controller(), "c:\\Temp\\cse_profile.txt")
+    return CSEWrapper.Controller(Controller())
+
+if __name__ == '__main__':
+    ctrl = CreateController()

machine/installed_machines/sim12_turn_2ax/cse_driver/sinumerik/subprog/CHAN_DATA.def

@@ -0,0 +1 @@
+$SA_SPIND_MAX_VELO_LIMS[5]=100

machine/installed_machines/sim12_turn_2ax/cse_driver/sinumerik/subprog/ToolChange.SPF

@@ -0,0 +1,34 @@
+G0 G90 D0
+
+; Set the tool change position values in metric X,Y,Z
+R501=500.0
+R502=700.0
+
+; check the activ unit and change values if inch is in use
+; 3 for G700
+IF ($P_GG[13] == 1 OR $P_GG[13] == 3)
+   R501 = R501 / 25.4;
+   R502 = R502 / 25.4;
+ENDIF
+
+G0 G53 X=R501 Z=R502
+
+
+##LANGUAGE AC
+  INT nToolID;
+  nToolID   = getArrayElement("$TC_TP1",getVariable("$P_TOOLP"));
+
+  IF (nToolID < 10);
+    move (AXIS, "TURRET", nToolID*360.0/6.0     -30, 1.0);
+  ELSE;
+    move (AXIS, "TURRET", nToolID*360.0/6.0/10.0-30+90, 1.0);
+  ENDIF;
+
+  STRING strCarrierTool;
+  strCarrierTool=getCarrierTool ("Turret", ITOS(nToolID));
+
+  setNextTool (strCarrierTool, "Turret");
+  activateNextTool ("Turret");
+##LANGUAGE NATIVE
+
+ret

machine/installed_machines/sim12_turn_2ax/postprocessor/fanuc_PostConfigurator/Controller/ctrl_fanuc_base.cdl

@@ -0,0 +1,48 @@
+
+MACHINE FANUC
+
+EVENT prefer_solution
+{
+	UI_LABEL "Preferred Solution"
+	PARAM command_status
+	{
+		TYPE o
+		DEFVAL "Active"
+		OPTIONS "Active","Inactive","User Defined"
+		UI_LABEL "Status"
+	}
+	PARAM prefer_axis
+	{
+		TYPE o
+		DEFVAL "OFF"
+		OPTIONS "OFF", "A", "B", "C"
+		UI_LABEL "Preferred Axis"
+	}
+	PARAM prefer_output_min
+	{
+		TYPE d
+		DEFVAL "0.000000"
+		TOGGLE Off
+		UI_LABEL "Preferred Range Minimum"
+	}
+	PARAM prefer_output_max
+	{
+		TYPE d
+		DEFVAL "0.000000"
+		TOGGLE Off
+		UI_LABEL "Preferred Range Maximum"
+	}
+}
+
+EVENT program_control
+{
+	UI_LABEL "Program Control"
+	CATEGORY MILL DRILL
+	PARAM ctrl_program_control
+	{
+		TYPE b
+		DEFVAL "FALSE"
+		UI_LABEL "Call External Subroutine for Each Operation"
+	}
+}
+

machine/installed_machines/sim12_turn_2ax/postprocessor/fanuc_PostConfigurator/Controller/ctrl_fanuc_base_msg.tbc

@@ -0,0 +1,207 @@
+if {[catch {package require tbcload 1.6} err] == 1} {
+    return -code error "[info script]: The TclPro ByteCode Loader is not available or does not support the correct version -- $err"
+}
+tbcload::bceval {
+TclPro ByteCode 2 0 1.7 8.4
+29 0 397 62 0 0 120 0 7 29 29 -1 -1
+397
+w0E<!(H&s!/lSs!.EW<!.Qr<!=>YQ#3,tl#@|yTv0#>6#=8YUvF-1((+Ki<!;eQjw6)Ks!H=
+;u!.lvpv62T=!8KW<!J)X<!.Qr<!E13-&3,tl#@|yTv0#>6#DbCVvMWp((+Ki<!;eQjw=>Ks
+!OR;u!.lvpv62T=!?KW<!Q)X<!.Qr<!LpFB(B^a|(@|yTv0#>6#L=7WvU2d)(+Ki<!;eQjwE
+VKs!Wj;u!.lvpv62T=!GKW<!Y)X<!.Qr<!Tcur*JQ;9+@|yTv0#>6#Tm*Xv|bW*(+Ki<!;eQ
+jwMnKs!_-<u!.lvpv62T=!OKW<!a)X<!.Qr<!yVON-RDji-@|yTv0#>6#yHsXve=K+(+Ki<!
+;eQjwU1Ls!gE<u!.lvpv62T=!WKW<!i)X<!.Qr<!dI)*0Z7DE0@|yTv0#>6#d#gYvmm>,(+K
+i<!;eQjw|ILs!o|<u!dgU=!s<!%*=rtu2a99<3?/VW30oSs!EM7945un9v0xPT4z
+29
+?Lrg%|0Bh%|0Bh%|0Bh%|0Bh%|0Bh%M_bpv#!
+29
+VpAh%|0Bh%|0Bh%|0Bh%|0Bh%|0Bh%'ZZ/&)!
+62
+x
+7
+%6|,EYt|+
+x
+15
+c_dX?sN;oA`t&7AXtB+
+x
+4
+4/;EF
+x
+19
+-WXiCa-IIDfVEU@e:+Y?i@w,
+x
+31
+bVXiCAvHIDF54=63!0S/6`rO/mhk)F3+uD+cMc&
+x
+7
+c_dX?i@w,
+x
+5
+71GJ0M!
+x
+22
+c_dX?,#cDF1wviCp<q-DwL6<@CSw
+x
+5
+=G5cE1v
+x
+35
+O7a:@(?#j@*C?<@l0p|;m!lSAsgs`:.en|;8G@BGZ1g+
+x
+6
+;i7UAByw
+x
+44
+ivcDF-D_`F0Y#D+69=iCGS2NDCxVE+xER.D3FME++OGA+iGoCF'4DTA
+x
+7
+,'IIDfF-,
+x
+28
+ivcDF-CVE+xER.D3FME++OGA+iGoCF'4DTA
+x
+6
+F+MEFByw
+x
+40
+R9R.D-#sJDwaSCFA62E+31VE+xER.D3FME++OGA+iGoCF'4DTA
+x
+8
+39V5B(mIQB
+x
+8
+6|<JD*mIQB
+x
+39
+f@TC+2UVTAG!Uf_M.?iBrZmIDQjcM9+)3_Dp?7hC5/;EFn^c,
+x
+7
+6BDTAxk,,
+x
+47
+q7YhCGF2`F<MCiCiMWKF-#sJDwaSCFtBp|;m!lSAsgs`:.en|;8G@BGZ1g+
+x
+7
+7l/bE^4c,
+x
+39
+`4DEFc-?iBrZmIDQjcM9Qc7cD*gZ<@/2REC*C?<@%7HSAg@c,
+x
+10
+DVTKDpWxlBFnw
+x
+55
+LrHiEvQ7VCHG^e_`1QSA'!@;@-E|fDpwZW@wCQC+xER.D3FME++OGA+:!EoA9E0bEe4Q,
+x
+8
+73?<@q6IID
+x
+31
+avcDFvU?<@lXo|;m!lSAsgs`:.en|;8G@BGZ1g+
+x
+9
+4K*+Et5K(F1v
+x
+51
+LWebjVfD`JO_glLPfy,jN5E`Ja-lRTU2>-jEap|;m!lSAsgs`:.en|;8G@BGZ1g+
+x
+7
+E_5cEV4c,
+x
+49
+_.s'm0sj0QwaZ;S@B&L+>Xe|lo@HsMpP4lUc'GSA+QG)F+Ayh9jTCoA60aaE1v
+x
+10
+Hh5cEwvMkBFnw
+x
+35
+b%REC*C?<@9q3'D^Uo|;m!lSAsgs`:.en|;8G@BGZ1g+
+x
+7
+D8=iCfF-,
+x
+37
+q(Q)F;Vi|D5;sJD,<GDFc'GSA+QG)F+Ayh9jTCoA60aaE1v
+x
+11
+Jn5cE=i>_F_4g+
+x
+43
+f1ccEwiO.D-#sJD0EffD,oW/DkKo|;m!lSAsgs`:.en|;8G@BGZ1g+
+x
+8
+SL2*F#7IID
+x
+60
+AXj<^*iBgYX<.@KTwM^JL!AgYeR0vdxSZ#d3Q@CdQ>%Cd!^4H+xER.D3FME++OGA+iGoCF'4
+DTA
+x
+14
+B&v/Dk%ap@q3uSAOSw
+x
+30
+ZbRdk(RdfZd.?iBrZmIDQjcM9Qc7cD*gZ<@NSw
+x
+7
+GJseDdvH,
+x
+49
+^3Bf_MsZJF&Q3<@1.TC+69=iCQS2NDoLx8Vc'GSA+QG)F+Ayh9jTCoA60aaE1v
+x
+10
+GJseD*L7lBFnw
+x
+49
+q(Q)F>Bo8/7/vNCIOoPN/Y#D+0g_5B+?>)F6ti|D,aR.Dm-?iBrZmIDQjcM9n!
+x
+8
+=9p;@*mIQB
+x
+56
+sBDE+wQ#gDP|-wEn&Y5B&V#D+#Z#j@*C?<@3@)E+-+uD+xER.D3FME++OGA+iGoCF'4DTA
+x
+8
+H2rTAulIQB
+x
+39
+N0YPDn^5SA5JgeD&=MLCjLo|;m!lSAsgs`:.en|;8G@BGZ1g+
+x
+13
+@H-<@xCbOB'6K(F1v
+x
+30
+*Ml_kI/^`yT.?iBrZmIDQjcM9Qc7cD*gZ<@NSw
+x
+8
+TIlcE'mIQB
+x
+44
+bL,MF&btD+xER.D3FME++OGA+piP-``IC,Zs,%RDf?C:@rCs`FPfGo/
+x
+11
+o4jY?8ik)Fh^c,
+x
+3
+f;Q&
+x
+5
+sB-<@Ev
+x
+3
+ndD-
+x
+33
+X=@U?*7MaEomK;@gKi'Fn^(kBy%ap@id,<@&?0bE?v
+x
+3
+bdD-
+i
+4
+i
+0
+x
+0
+
+0
+0
+}

machine/installed_machines/sim12_turn_2ax/postprocessor/fanuc_PostConfigurator/Libraries/lib_pretreatment.def

@@ -0,0 +1,193 @@
+
+MACHINE PRETREATMENT
+
+FORMATTING
+{
+
+  WORD_SEPARATOR " "
+  END_OF_LINE "\135"
+  SEQUENCE sequence_number 10 10 1 99999
+
+  FORMAT AbsCoord "&__5.3_"
+  FORMAT Coordinate "&__5.3_"
+  FORMAT Digit_2 "&_02_00"
+  FORMAT Digit_4 "&_04_00"
+  FORMAT Digit_5 "&__5_00"
+  FORMAT Dwell_SECONDS "&__5.3_"
+  FORMAT EventNum "&+03_00"
+  FORMAT Feed "&__7.2_"
+  FORMAT Feed_DPM "&__5.2_"
+  FORMAT Feed_FRN "&__5.3_"
+  FORMAT Feed_INV "&__5.3_"
+  FORMAT Feed_IPM "&__4.1_"
+  FORMAT Feed_IPR "&__1.4_"
+  FORMAT Feed_MMPM "&__5.0_"
+  FORMAT Feed_MMPR "&__2.3_"
+  FORMAT Hcode "&_02_00"
+  FORMAT Rev "&__4_00"
+  FORMAT Rotary "&__5.5_"
+  FORMAT String "%s"
+  FORMAT Tcode "&_02_00"
+  FORMAT Zero_int "&_01_0_"
+  FORMAT Zero_real "&_01.10"
+
+  ADDRESS N
+  {
+      FORMAT      String
+      FORCE       always
+      LEADER      [$mom_sys_leader(N)]
+  }
+  ADDRESS G_motion
+  {
+      FORMAT      String
+      FORCE       off
+      LEADER      [$mom_sys_leader(G)]
+  }
+  ADDRESS X
+  {
+      FORMAT      Coordinate
+      FORCE       always
+      LEADER      [$mom_sys_leader(X)]
+      ZERO_FORMAT Zero_real
+  }
+  ADDRESS Y
+  {
+      FORMAT      Coordinate
+      FORCE       off
+      LEADER      [$mom_sys_leader(Y)]
+      ZERO_FORMAT Zero_real
+  }
+
+  ADDRESS Z
+  {
+      FORMAT      Coordinate
+      FORCE       off
+      LEADER      [$mom_sys_leader(Z)]
+      ZERO_FORMAT Zero_real
+  }
+
+  ADDRESS fourth_axis
+  {
+      FORMAT      Rotary
+      FORCE       off
+      LEADER      [$mom_sys_leader(fourth_axis)]
+      ZERO_FORMAT Zero_real
+  }
+
+  ADDRESS fifth_axis
+  {
+      FORMAT      Rotary
+      FORCE       off
+      LEADER      [$mom_sys_leader(fifth_axis)]
+      ZERO_FORMAT Zero_real
+  }
+  ADDRESS I
+  {
+      FORMAT      Coordinate
+      FORCE       always
+      LEADER      [$mom_sys_leader(I)]
+      ZERO_FORMAT Zero_real
+  }
+
+  ADDRESS J
+  {
+      FORMAT      Coordinate
+      FORCE       always
+      LEADER      [$mom_sys_leader(J)]
+      ZERO_FORMAT Zero_real
+  }
+
+  ADDRESS K
+  {
+      FORMAT      Coordinate
+      FORCE       always
+      LEADER      [$mom_sys_leader(K)]
+      ZERO_FORMAT Zero_real
+  }
+
+  ADDRESS S
+  {
+      FORMAT      Zero_int
+      FORCE       always
+      LEADER      "S"
+  }
+
+
+	BLOCK_TEMPLATE sequence_number
+	{
+		N[ ]
+	}
+	BLOCK_TEMPLATE sequence_number_turbo
+	{
+		N[ ]
+	}
+	BLOCK_TEMPLATE circular_move_turbo
+	{
+		G_motion[$mom_sys_circle_code(string)]
+		X[^POSX]
+		Y[^POSY]
+		Z[^POSZ]
+		fourth_axis[^POS4]
+		fifth_axis[^POS5]
+		S[$mom_spindle_speed]
+	}
+	BLOCK_TEMPLATE linear_move_turbo
+	{
+		G_motion[$mom_sys_linear_code]
+		X[^POSX]
+		Y[^POSY]
+		Z[^POSZ]
+		fourth_axis[^POS4]
+		fifth_axis[^POS5]
+		S[$mom_spindle_speed]
+	}
+	BLOCK_TEMPLATE rapid_move_turbo
+	{
+		G_motion[$mom_sys_rapid_code]
+		X[^POSX]
+		Y[^POSY]
+		Z[^POSZ]
+		fourth_axis[^POS4]
+		fifth_axis[^POS5]
+		S[$mom_spindle_speed]
+	}
+	BLOCK_TEMPLATE circular_move
+	{
+		G_motion[$mom_sys_circle_code(string)]
+		X[$mom_mcs_goto(0)]
+		Y[$mom_mcs_goto(1)]
+		Z[$mom_mcs_goto(2)]
+		fourth_axis[$mom_out_angle_pos(0)]
+		fifth_axis[$mom_out_angle_pos(1)]
+		S[$mom_spindle_speed]
+	}
+	BLOCK_TEMPLATE linear_move
+	{
+		G_motion[$mom_sys_linear_code]
+		X[$mom_mcs_goto(0)]
+		Y[$mom_mcs_goto(1)]
+		Z[$mom_mcs_goto(2)]
+		fourth_axis[$mom_out_angle_pos(0)]
+		fifth_axis[$mom_out_angle_pos(1)]
+		S[$mom_spindle_speed]
+	}
+	BLOCK_TEMPLATE rapid_move
+	{
+		G_motion[$mom_sys_rapid_code]
+		X[$mom_mcs_goto(0)]
+		Y[$mom_mcs_goto(1)]
+		Z[$mom_mcs_goto(2)]
+		fourth_axis[$mom_out_angle_pos(0)]
+		fifth_axis[$mom_out_angle_pos(1)]
+		S[$mom_spindle_speed]
+	}
+	BLOCK_TEMPLATE rapid_move_drill
+	{
+		G_motion[$mom_sys_rapid_code]
+		X[$mom_cycle_feed_to_pos(0)]
+		Y[$mom_cycle_feed_to_pos(1)]
+		Z[$mom_cycle_feed_to_pos(2)]
+		S[$mom_spindle_speed]
+	}
+}
+

machine/installed_machines/sim12_turn_2ax/postprocessor/fanuc_PostConfigurator/Libraries/lib_pretreatment.tcl

@@ -0,0 +1,535 @@
+####C#U#S#T#O#M##M#E#T#A##I#N#F#O#R#M#A#T#I#O#N##############################################
+#
+#	Customer Data
+#
+#	Company         :
+#	Address         :
+#	Contact person  :
+#	Phone           :
+#	Fax             :
+#	Mail            :
+#
+####S#T#A#R#T##C#H#A#N#G#E##H#I#S#T#O#R#Y####################################################
+#
+#	Last changes:	01.02.2011 - UR  001 Initial Release and Installation
+#			23.08.2013 - UR  002 Add keywords for comment lines (important, because automation respond)
+#			03.09.2013 - UR  003 Releaseversion 1.0
+#			09.10.2013 - COE 004 Changed setting of lib_ge_env(tmp_dir)
+#			10.12.2013 - UR  005 Decomposing the basic functions
+#			10.02.2014 - COE 006 Releaseversion 2.0
+#			17.02.2014 - COE 007 Releaseversion 2.1
+#			13.03.2014 - UR  008 Releaseversion 2.2
+#			31.03.2014 - UR  009 Add lib_flag(PB_decontamination) to switch of PB support
+#			31.03.2014 - UR  010 Releaseversion 2.3
+#			11.04.2014 - UR  011 Releaseversion 2.3.1
+#			12.05.2014 - UR  012 Releaseversion 2.3.2
+#			18.05.2014 - UR  013 Add sourcing with the possibility of nesting folders
+#			19.05.2014 - UR  014 Releaseversion 2.3.3
+#			26.05.2014 - UR  015 Revision of the LIB_Shell_search_path_recursively routines when a blank is included in the path
+#			16.06.2014 - COE 016 Releaseversion 2.3.4
+#			16.06.2014 - UR  017 Add recursively sourcing for the pretreatment files
+#			24.06.2014 - UR  018 Releaseversion 2.3.5
+#			24.06.2014 - UR  019 Releaseversion 2.4
+#			07.07.2014 - UR  020 Releaseversion 2.4.1
+#			16.07.2014 - UR  021 Releaseversion 3.0
+#			29.07.2014 - COE 022 LIB_Shell_environment_handling: lib_ge_env(installed_machines_dir,recursively)
+#					     LIB_Shell_main: no longer call LIB_Shell_search_path_recursively
+#			30.07.2014 - COE 023 Releaseversion 3.1
+#			12.08.2014 - UR  024 Releaseversion 3.1.1
+#			13.08.2014 - UR  025 Adopted revised texts from SPLM
+#			13.08.2014 - UR  026 Releaseversion 3.2
+#			13.08.2014 - UR  027 Releaseversion 3.2.1
+#			15.08.2014 - COE 028 Adopt modifications SPLM
+#			15.08.2014 - COE 029 Releaseversion 3.2.2
+#			25.08.2014 - UR  030 Releaseversion 3.2.3
+#			10.09.2014 - UR  031 Releaseversion 3.2.4
+#			11.09.2014 - UR  032 Releaseversion 3.2.5
+#			22.09.2014 - UR  033 Add property for "show where output comes from" and delete flag(show_where_output_comes_from)
+#			29.09.2014 - COE 034 Releaseversion 3.2.6
+#			13.10.2014 - COE 035 Releaseversion 3.2.7
+#			21.10.2014 - COE 036 Releaseversion 3.2.8
+#			04.11.2014 - COE 037 Releaseversion 3.2.9
+#			11.11.2014 - UR  038 Modification of the complete post speed
+#			13.11.2014 - UR  039 Modification of the complete post speed
+#			21.11.2014 - COE 040 LIB_Shell_environment_handling: changde setting of lib_ge_env(installed_machines_dir,recursively)
+#			28.11.2014 - COE 041 Releaseversion 3.2.10
+#			22.12.2014 - UR  042 Releaseversion 3.3
+#			22.12.2014 - UR  043 Releaseversion 3.3.1
+#			05.01.2015 - UR  044 Releaseversion 3.3.2 and changed the Copyright
+#			06.01.2015 - UR  045 Releaseversion 3.3.3
+#			06.01.2015 - UR  046 Releaseversion 3.3.4
+#			07.01.2015 - UR  047 Releaseversion 3.3.5
+#			11.01.2015 - UR  048 Releaseversion 3.3.6
+#			11.01.2015 - COE 049 Bugfix if the current directory has spaces
+#			13.01.2015 - COE 050 Releaseversion 3.3.7
+#			20.01.2015 - UR  051 Change file nativename and join to LIB_Shell_format_path_names to save runtime
+#			25.01.2015 - UR  052 Releaseversion 3.3.8
+#			28.01.2015 - UR  053 Bugfix at LIB_Shell_environment_handling to defined the base folder
+#			03.02.2015 - UR  054 Correction if the PostConfigurator structure is used
+#			09.02.2015 - UR  055 Releaseversion 3.3.9
+#			02.03.2015 - COE 056 Releaseversion 3.4
+#			12.03.2015 - UR  057 Releaseversion 3.4.1
+#			16.03.2015 - UR  058 Releaseversion 3.4.2
+#			30.03.2015 - UR  059 Releaseversion 3.4.3
+#			20.04.2015 - COE 060 Releaseversion 3.4.4
+#			28.04.2015 - COE 061 Releaseversion 3.4.5
+#			15.06.2015 - UR  062 Releaseversion 3.4.6
+#			15.06.2015 - UR  063 Change abort handling
+#			16.06.2015 - UR  064 Releaseversion 3.4.7
+#			22.06.2015 - UR  065 Releaseversion 3.4.8
+#			21.07.2015 - UR  066 Releaseversion 3.4.9
+#			28.07.2015 - COE 067 Releaseversion 3.4.10
+#			11.08.2015 - COE 068 Releaseversion 3.4.11
+#			16.08.2015 - UR  069 Save Time with Extended foreach Syntax e.g. foreach {a b c d e} [cmdReturningList] {break}
+#						Side note: accelerated runtime after the first index, for one index no improvement
+#					     Comparing if Command exists now with LIB_GE_check_commands to wrote the values to an list once
+#					     Modifications of the memory handling with Procedures K SK D unset! clear and set!, see http://wiki.tcl.tk/1923
+#					     Removing unneeded characters and partially reformat
+#			20.08.2015 - UR  070 Changed misspelling from adress to address (Bug #784)
+#			20.08.2015 - UR  071 Releaseversion 3.4.12
+#			21.08.2015 - UR  072 Releaseversion 3.4.13
+#			24.08.2015 - COE 073 Releaseversion 3.5
+#			04.09.2015 - COE 074 Releaseversion 3.5.1
+#			07.09.2015 - COE 075 Releaseversion 3.5.2
+#			08.09.2015 - COE 076 Releaseversion 3.5.3
+#			13.09.2015 - UR  077 Performance improvement when examining whether a procedure exists and also to loading files
+#			15.09.2015 - UR  078 Releaseversion 3.5.4
+#			17.09.2015 - UR  079 Change the filename for the lib_ge_dll_version to lower case
+#			21.09.2015 - UR  080 Releaseversion 3.6
+#			29.09.2015 - UR  081 Releaseversion 3.6.1
+#			30.09.2015 - UR  082 Releaseversion 3.6.2
+#			05.10.2015 - UR  083 Releaseversion 3.6.3
+#			26.10.2015 - UR  084 Releaseversion 3.6.4
+#			27.10.2015 - UR  085 Releaseversion 3.6.5
+#			18.12.2015 - COE 086 Releaseversion 3.6.6
+#			13.01.2016 - UR  087 Releaseversion 3.6.7
+#			25.02.2016 - UR  088 Releaseversion 3.6.8
+#			07.03.2016 - UR  089 Releaseversion 3.6.9
+#			24.03.2016 - COE 090 Releaseversion 3.6.10
+#			13.04.2016 - UR  091 Releaseversion 3.6.11
+#			20.04.2016 - UR  092 Releaseversion 3.6.12
+#			28.04.2016 - UR  093 Releaseversion 3.7
+#			29.04.2016 - UR  094 Releaseversion 3.7.1
+#			15.05.2016 - COE 095 Releaseversion 3.7.2
+#			15.05.2016 - COE 096 Releaseversion 3.7.3
+#			17.05.2016 - COE 097 Releaseversion 3.7.4
+#			23.05.2016 - COE 098 Releaseversion 3.7.5
+#			27.06.2016 - MAN 099 Update internal documentation
+#			15.08.2016 - UR  100 Releaseversion 4.0
+#			24.08.2016 - UR  101 Releaseversion 4.0.1
+#			04.09.2016 - COE 102 Releaseversion 4.0.2
+#			05.09.2016 - COE 103 LIB_Shell_environment_handling: 'libraries', 'controller' and 'bin'
+#						all lowercase (we check it against the result of 'string tolower')
+#						(back to status of version 100)
+#			05.09.2016 - COE 104 Releaseversion 4.0.3
+#			08.09.2016 - UR  105 Releaseversion 4.0.4
+#			22.09.2016 - UR  106 HISTORY-> Modifications to support now also Linux <-
+#			24.09.2016 - UR  107 Releaseversion 4.0.5
+#			25.09.2016 - UR  108 Releaseversion 4.1
+#			27.09.2016 - UR  109 Releaseversion 4.1.1
+#			04.10.2016 - UR  110 Releaseversion 4.1.2
+#			24.10.2016 - UR  111 Releaseversion 4.1.3
+#			17.11.2016 - MAN 112 Source also from UGII_POST_POOL_DIR_NG_CUSTOM
+#			19.11.2016 - UR  113 Releaseversion 4.1.4
+#			21.11.2016 - MAN 114 Remove again sourcing from UGII_POST_POOL_DIR_NG_CUSTOM
+#			07.12.2016 - UR  115 Releaseversion 4.1.5
+#			11.01.2017 - COE 116 Releaseversion 4.1.6
+#			21.02.2017 - UR  117 Releaseversion 4.1.7
+#			24.02.2017 - UR  118 Releaseversion 4.1.8
+#			13.03.2017 - COE 119 Releaseversion 4.2
+#			05.04.2017 - COE 120 Releaseversion 4.2.1
+#			06.04.2017 - COE 121 Releaseversion 4.2.2
+#			07.04.2017 - COE 122 Releaseversion 4.2.3
+#			24.04.2017 - UR  123 Remove PUI settings and procedures
+#			28.04.2017 - COE 124 Releaseversion 4.2.4
+#			19.05.2017 - UR  125 Releaseversion 4.2.5
+#			18.06.2017 - COE 126 Releaseversion 4.2.6
+#			27.06.2017 - COE 127 Releaseversion 4.2.7
+#			06.07.2017 - UR  128 Extension for the layer editor
+#			31.07.2017 - UR  129 Releaseversion 4.2.8
+#			01.08.2017 - UR  130 Bugfix if variable TEMP not exists within LINUX systems
+#			02.08.2017 - UR  131 Releaseversion 4.2.9
+#			31.08.2017 - UR  132 Add support for *.pcf
+#			01.09.2017 - UR  133 Releaseversion 4.2.10
+#			11.09.2017 - COE 134 Releaseversion 4.2.11
+#			25.09.2017 - COE 135 Releaseversion 4.3
+#			12.11.2017 - COE 136 Releaseversion 4.3.1
+#			28.11.2017 - UR  137 Releaseversion 4.3.2
+#			04.12.2017 - UR  138 Adding the process ID to all files that are traded through the preparation process
+#			21.02.2018 - COE 139 Releaseversion 4.3.3
+#			12.03.2018 - UR  140 File contents revised for TCL8.6 and converted to UTF-8
+#			14.03.2018 - UR  141 Releaseversion 4.4
+#			20.03.2018 - UR  142 Releaseversion 4.4.1
+#			12.04.2018 - UR  143 Releaseversion 4.4.2
+#			04.05.2018 - UR  144 Releaseversion 4.4.3
+#			14.05.2018 - UR  145 Releaseversion 4.4.4
+#			02.07.2018 - UR  146 Releaseversion 4.4.5
+#			20.07.2018 - COE 147 Releaseversion 4.4.6
+#			10.09.2018 - UR  148 Releaseversion 4.4.7
+#			24.09.2018 - UR  149 Releaseversion 4.4.8
+#			08.10.2018 - UR  150 Releaseversion 4.4.9
+#			18.10.2018 - COE 151 Releaseversion 4.5
+#			11.01.2019 - UR  152 Releaseversion 4.6.1
+#			08.02.2019 - UR  153 Releaseversion 4.6.2
+#			16.03.2019 - UR  154 Releaseversion 4.6.3
+#			21.03.2019 - UR  155 Function revision so that the MOM Execute can also be loaded in versions >= 1847
+#			28.03.2019 - COE 156 Releaseversion 4.7
+#			11.04.2019 - UR  157 Releaseversion 4.7.1
+#			18.04.2019 - UR  158 Releaseversion 4.7.2
+#			07.05.2019 - UR  159 Releaseversion 5.0
+#			08.07.2019 - UR  160 Releaseversion 5.0.1
+#			31.07.2019 - UR  161 Releaseversion 5.0.2
+#			16.08.2019 - COE 162 Releaseversion 5.0.3
+#			21.08.2019 - COE 163 Releaseversion 5.1.0
+#			20.09.2019 - COE 164 Releaseversion 5.2.0
+#			06.11.2019 - UR  165 Releaseversion 5.2.3
+#			27.12.2019 - UR  166 Releaseversion 5.2.4
+#			31.01.2020 - COE 167 Releaseversion 5.2.5
+#			02.03.2020 - UR  168 Releaseversion 5.2.6
+#			19.03.2020 - COE 169 Releaseversion 5.2.7
+#			25.03.2020 - COE 170 Releaseversion 5.3.0
+#			23.04.2020 - UR  171 Bugfix set lib_ge_dll_version instead of dotnet_version
+#			01.07.2020 - COE 172 Releaseversion 5.3.1
+#			09.07.2020 - COE 173 Releaseversion 5.3.2
+#			06.09.2020 - COE 174 Releaseversion 5.3.3
+#			15.09.2020 - COE 175 Releaseversion 5.3.4
+#			26.09.2020 - COE 176 Releaseversion 5.3.5
+#			26.11.2020 - COE 177 Releaseversion 5.3.6
+#			24.01.2021 - COE 178 Releaseversion 5.3.7
+#			06.02.2021 - COE 179 Releaseversion 5.3.8
+#			15.03.2021 - COE 180 Releaseversion 5.3.9
+#			13.04.2021 - COE 181 Releaseversion 5.4.0
+#			16.05.2021 - COE 182 Bug#2260: check UGII_TMP_DIR first, use system-env only as fallback
+#			02.06.2021 - COE 183 Releaseversion 5.4.1
+#			11.06.2021 - COE 184 Linux compatibility
+#			21.07.2021 - COE 185 Releaseversion 5.4.2
+#			03.09.2021 - COE 186 Releaseversion 5.4.3
+#			07.09.2021 - COE 187 Releaseversion 5.4.4
+#			29.09.2021 - COE 188 Releaseversion 5.5.0
+#			25.10.2021 - COE 189 Releaseversion 5.5.1
+#			24.11.2021 - COE 190 Releaseversion 5.5.2
+#			19.02.2022 - COE 191 Releaseversion 5.5.3
+#			06.03.2022 - COE 192 Releaseversion 5.5.4
+#			08.04.2022 - COE 193 Releaseversion 5.5.5
+#			13.07.2022 - COE 194 Releaseversion 5.5.6
+#			07.09.2022 - COE 195 Releaseversion 5.5.7
+#			24.09.2022 - COE 196 Releaseversion 5.5.8
+#			15.01.2023 - COE 197 Releaseversion 23.01.0
+#			14.03.2023 - COE 198 Releaseversion 23.03.0
+#			07.04.2023 - COE 199 Releaseversion 23.04.0
+#			14.07.2023 - COE 200 Releaseversion 23.07.0
+#			14.09.2023 - COE 201 Releaseversion 23.09.0
+#			09.10.2023 - ET  202 Releaseversion 23.10.0
+#			10.12.2023 - COE 203 Releaseversion 23.12.0
+#			19.01.2024 - COE 204 Releaseversion 24.01.0
+#			21.03.2024 - COE 205 Releaseversion 24.03.0
+#			13.08.2024 - COE 206 Releaseversion 24.08.0
+#			22.08.2024 - COE 207 Releaseversion 24.08.1
+#			16.09.2024 - COE 208 Releaseversion 24.09.0
+#			24.09.2024 - ET  209 Releaseversion 24.09.1
+#			27.12.2024 - COE 210 Releaseversion 24.12.0
+#			02.04.2025 - COE 211 Releaseversion 25.04.0
+#
+#
+#
+#
+#
+#
+#
+#
+#
+#############################################################################################
+#	Copyright 2014-2024 Siemens Product Lifecycle Management Software Inc.
+#				All Rights Reserved.
+
+#
+####S#T#A#N#D#A#R#D##S#O#U#R#C#I#N#G#########################################################
+
+#____________________________________________________________________________________________
+#
+# Procedure debugger
+#____________________________________________________________________________________________
+#
+
+set lib_ge_debug(on) 0
+set lib_ge_debug(proc_watch_list) "MOM* PPLIB* PROC*"
+set lib_ge_debug(var_write_trace_list) "mom_group_name"
+set lib_ge_debug(proc_watch_exclude_list) "MOM_SMART* MOM_evaluate_arg MOM_before_each_add_var MOM_before_load_address"
+#____________________________________________________________________________________________
+set lib_debug_source_of_proc_list 		""
+set lib_fh_do_after_output			0	;#if set to 0 the posttreatment loop is suppressed
+
+if {![info exists lib_ge_platform]} {
+	set lib_ge_temppath ""
+	if {[info commands MOM_ask_env_var] != ""} {
+		set lib_ge_temppath [MOM_ask_env_var UGII_TMP_DIR]
+	}
+	
+	if {[string match "*windows*" $tcl_platform(platform)]} {
+		set lib_ge_platform 1
+		set lib_ge_slash "\\"
+		if {$lib_ge_temppath == ""} {
+			if {[info exists env(TEMP)]} {
+				set lib_ge_temppath $env(TEMP)
+			} elseif {[info exists env(TMP)]} {
+				set lib_ge_temppath $env(TMP)
+			}
+		}
+	} else {
+		set lib_ge_platform 0
+		set lib_ge_slash "/"
+		if {$lib_ge_temppath == ""} {
+			if {[info exists env(TMPDIR)]} {
+				set lib_ge_temppath $env(TMPDIR)
+			}
+			if {![string length $lib_ge_temppath]} {
+				set lib_ge_temppath "${lib_ge_slash}var${lib_ge_slash}tmp"
+			}
+		}
+	}
+}
+
+#____________________________________________________________________________________________
+# <Internal Documentation>
+#
+# Handling for the default environment variables
+#
+# <Internal Example>
+#
+#____________________________________________________________________________________________
+proc LIB_Shell_environment_handling {} {
+
+ 	global lib_ge_env lib_ge_slash lib_ge_installed_machines
+
+	set lib_ge_env(post_pool_dir) 		[LIB_Shell_format_path_names [MOM_ask_env_var "UGII_POST_POOL_DIR_NG"]]
+	set lib_ge_env(cam_post_dir) 		[LIB_Shell_format_path_names [MOM_ask_env_var "UGII_CAM_POST_DIR"]]
+	set lib_ge_env(tmp_dir)                 [LIB_Shell_format_path_names [MOM_ask_env_var "UGII_TMP_DIR"]]
+	if {$lib_ge_env(tmp_dir) == ""} {set lib_ge_env(tmp_dir) $::lib_ge_temppath}
+
+	if {[string match [string tolower [file tail [file dirname [info script]]]] "libraries"]} {
+		set lib_ge_installed_machines	[file dirname [info script]]
+	} else {
+		set lib_ge_installed_machines	[info script]
+	}
+
+	set lib_ge_env(installed_machines_dir) 	[LIB_Shell_format_path_names [file dirname $lib_ge_installed_machines]]
+	# Needed is searchpath activ, therefore info script is wrong
+	if {[file exists [LIB_Shell_format_path_names "$lib_ge_env(tmp_dir)${lib_ge_slash}pretreatment_script.tcl"]]} {source [LIB_Shell_format_path_names "$lib_ge_env(tmp_dir)${lib_ge_slash}pretreatment_script.tcl"]}
+
+	set lib_ge_env(installed_machines_dir,recursively) ""
+	lappend lib_ge_env(installed_machines_dir,recursively) $lib_ge_env(installed_machines_dir)
+
+	set current_dir [pwd]
+	if {![catch {cd [lindex $lib_ge_env(installed_machines_dir,recursively) 0]}]} {
+		if {![catch {set dir [string tolower [glob *]]}]} {
+			foreach e {libraries controller bin} {
+				set index [lsearch -exact $dir $e]
+				if {$index > -1} {
+					set directory [lindex $dir $index]
+					set directory [string toupper [string index $directory 0]][string range $directory 1 end]
+					lappend lib_ge_env(installed_machines_dir,recursively) [LIB_Shell_format_path_names "[lindex $lib_ge_env(installed_machines_dir,recursively) 0]$lib_ge_slash$directory"]
+				}
+			}
+		}
+	}
+	cd $current_dir
+
+	if {![regexp -nocase -- {\w+} $lib_ge_env(post_pool_dir)]} {set lib_ge_env(post_pool_dir) $lib_ge_env(installed_machines_dir)}
+
+	set lib_ge_env(version_bit)  			[MOM_ask_env_var "UGII_VERSION_BIT"]
+	set lib_ge_env(base_dir)     			[MOM_ask_env_var "UGII_BASE_DIR"]
+
+	set lib_ge_env(compatible_base_release_version)	[MOM_ask_env_var "NX_COMPATIBLE_BASE_RELEASE_VERSION"]
+	set lib_ge_env(major_version)  			[MOM_ask_env_var "UGII_MAJOR_VERSION"]
+	set lib_ge_env(minor_version)     		[MOM_ask_env_var "UGII_MINOR_VERSION"]
+	set lib_ge_env(subminor_version)     		[MOM_ask_env_var "UGII_SUBMINOR_VERSION"]
+
+	if {![info exists lib_ge_dll_version]} {global lib_ge_dll_version}
+	if {$lib_ge_env(minor_version) > 0} {
+		set lib_ge_dll_version "nx$lib_ge_env(major_version)$lib_ge_env(minor_version)"
+	} else {
+		set lib_ge_dll_version "nx$lib_ge_env(major_version)"
+	}
+	if {[llength $lib_ge_env(compatible_base_release_version)] > 0} {set lib_ge_dll_version "nx$lib_ge_env(compatible_base_release_version)"}
+
+	if {[string match "*windows*" $::tcl_platform(platform)]} {
+		regsub -all "/" $lib_ge_env(base_dir) "\\" lib_ge_env(base_dir)
+	}
+
+}
+
+#____________________________________________________________________________________________
+# <Internal Documentation>
+#
+# This procedure may be used to format pathnames from unix format in windows
+# format and delete double backslash
+#
+# Output:
+# D:\Temp\mom\debug.out or \\Server\Temp\mom\debug.out
+#
+# e.g.
+# set error [LIB_Shell_format_path_names "D:/Temp/mom/debug.out"]
+#
+# <Example>
+# set error [LIB_Shell_format_path_names "D:/Temp/mom/debug.out"]
+#____________________________________________________________________________________________
+proc LIB_Shell_format_path_names {pathname} {
+
+	global lib_ge_slash lib_ge lib_ge_platform
+
+	regsub -all "/" $pathname "\\" pathname
+	binary scan $pathname H* pathbin
+	if {[info exists lib_ge(format_path,$pathbin,0,0,0)]} {
+		return $lib_ge(format_path,$pathbin,0,0,0)
+	}
+
+	if {[regexp -nocase -- {^[\\\\]|^[\/\/]} $pathname]} {
+		regsub -all "/" $pathname "\\" pathname
+	}
+
+	if {$lib_ge_platform} {
+		regsub -all "/" $pathname "\\" pathname
+		if {![regexp -nocase -- {^\\\\} $pathname]} {set unc 0} else {set unc 1}
+			 while {[regsub -- "(?q)\\\\" $pathname "\\" pathname]} {}
+		if {$unc} {set pathname "\\$pathname"}
+	} elseif {!$lib_ge_platform} {
+		regsub -all "\\\\" $pathname "/" pathname
+		if {![regexp -nocase -- {^//} $pathname]} {set unc 0} else {set unc 1}
+		while {[regsub -- "(?q)//" $pathname "/" pathname]} {}
+		if {$unc} {set pathname "/$pathname"}
+	}
+
+	set lib_ge(format_path,$pathbin,0,0,0) [string trim $pathname]
+	return $lib_ge(format_path,$pathbin,0,0,0)
+
+}
+
+#____________________________________________________________________________________________
+# <Internal Documentation>
+#
+# Abort postrun
+#
+# <Internal Example>
+#
+#____________________________________________________________________________________________
+proc LIB_Shell_abort {message} {
+
+	MOM_output_to_listing_device $message
+	MOM_log_message $message
+
+	MOM_abort $message
+
+}
+
+#____________________________________________________________________________________________
+# <Internal Documentation>
+#
+# Handling for the main shell
+#
+# <Internal Example>
+#
+#____________________________________________________________________________________________
+proc LIB_Shell_main {} {
+
+	global lib_ge_env lib_ge_slash
+	global lib_cycle_path sourcefile
+
+	LIB_Shell_environment_handling
+
+	lappend ::lib_ge_monitored_files [LIB_Shell_format_path_names [info script]]
+
+	if {[info commands LIB_GE_source] == ""} {
+		set lib_cycle_path 0
+		set searchpath $lib_ge_env(installed_machines_dir,recursively)
+		lappend searchpath $lib_ge_env(post_pool_dir)
+		foreach path $searchpath {
+			if {$lib_cycle_path} {break}
+			foreach ext {.tcl .tbc .pcf} {
+				set sourcefile [LIB_Shell_format_path_names "$path${lib_ge_slash}lib_sourcing$ext"]
+				if {[file exists $sourcefile]} {
+					if {[string match ".tbc" $ext]} {
+						LIB_Shell_abort "ByteCode Loader is not available, cannot process lib_sourcing$ext"
+					}
+					uplevel #0 {
+
+						set err ""
+						if {$tcl_version >= 8.6 && [catch {source -encoding utf-8 $sourcefile} err]} {
+							if {[info exists ::errorInfo]} {MOM_output_to_listing_device "errorInfo $::errorInfo"}
+							LIB_Shell_abort "File lib_sourcing $err not loadable"
+						}
+						if {$tcl_version < 8.6 && [catch {source $sourcefile} err]} {
+							if {[info exists ::errorInfo]} {MOM_output_to_listing_device "errorInfo $::errorInfo"}
+							LIB_Shell_abort "File lib_sourcing $err not loadable"
+						}
+						if {[string length $err] > 0} {
+							set lib_ge_debug(lib_sourcing) "$sourcefile"
+							lappend lib_ge_monitored_files "$sourcefile"
+							lappend lib_ge_log_message "\n--> $sourcefile loaded"
+							set lib_cycle_path 1 ; break
+						}
+
+					}
+				}
+			}
+		}
+		if {!$lib_cycle_path} {
+			LIB_Shell_abort "File lib_sourcing not found"
+		}
+	}
+
+	LIB_Shell_init
+
+}
+
+#____________________________________________________________________________________________
+# <Internal Documentation>
+#
+# Handling for the default environment variables
+#
+# <Internal Example>
+#
+#____________________________________________________________________________________________
+proc LIB_Shell_defined_post_environment {} {
+
+	global lib_ge_env lib_ge_slash lib_pp_source_file
+
+	#____________________________________________________________________________________________
+	#
+	# NX Post, load files
+	#____________________________________________________________________________________________
+	#
+
+	# There are different ways to source each files
+	#
+	# e.g. Befor LIB_GE_source call
+	# lappend lib_pp_source_file "machine,UGII_CAM_POST_DIR"
+	#
+	# e.g. After LIB_GE_source call
+	# LIB_GE_source "Test" "C:/Temp/;d:/tmp/"
+	#
+	# e.g. To define a searchpath
+	# LIB_GE_source "" "C:/Temp/;UGII_CAM_POST_DIR"
+	# Allowed is the direct path and/or variable
+
+	# This is the call the PB post LIB_GE files
+	# ** internal funktion / Don't remove this line **
+
+	if {[file exists "$lib_ge_env(tmp_dir)${lib_ge_slash}pt_source_list_[pid].tcl"]} {
+		LIB_GE_source pt_source_list_[pid] "$lib_ge_env(tmp_dir)${lib_ge_slash}" ".tcl" 0 0 "RUNTIME"
+		LIB_GE_source lib_pretreatment_post
+	} else {
+		lappend lib_pp_source_file "ugpost_base" "lib_msg" "lib_file_handling" "lib_standard_post_func" "lib_document" "lib_pretreatment_post"
+		LIB_GE_source
+	}
+}
+
+LIB_Shell_main
+
+####S#T#A#R#T##C#U#S#T#O#M##M#O#D#I#F#I#C#A#T#I#O#N#S########################################
+
+####E#N#D##C#U#S#T#O#M##M#O#D#I#F#I#C#A#T#I#O#N#S############################################
+
+#############################################################################################
+# This is to debug
+#############################################################################################
+if {[info commands LIB_GE_debug] != ""} {LIB_GE_debug}

machine/installed_machines/sim12_turn_2ax/postprocessor/fanuc_PostConfigurator/machine_ootb_5ax_fanuc.tbc

@@ -0,0 +1,22 @@
+if {[catch {package require tbcload 1.6} err] == 1} {
+    return -code error "[info script]: The TclPro ByteCode Loader is not available or does not support the correct version -- $err"
+}
+tbcload::bceval {
+TclPro ByteCode 2 0 1.7 8.4
+1 0 6 2 0 0 4 0 2 1 1 -1 -1
+6
+w0E<!4!!
+1
+z
+1
+&!
+2
+x
+16
+c_dX?fIbOBh++Y?r^oRA
+x
+4
+P#AM9
+0
+0
+}

machine/installed_machines/sim12_turn_2ax/postprocessor/fanuc_PostConfigurator/oem_ootb_5ax_fanuc.def

@@ -0,0 +1,22 @@
+MACHINE FANUC
+
+FORMATTING
+{
+  SEQUENCE sequence_number 1 1 1 999999
+  
+  
+   BLOCK_TEMPLATE return_rotary_axis_to_zero 
+  {
+       G_mode[$mom_sys_output_code(ABSOLUTE)]
+       G_return[$mom_sys_return_code]
+       G_motion[$mom_sys_rapid_code]
+       fourth_axis[0]\opt
+       fifth_axis[0]\opt
+  }
+  
+  
+  
+
+}
+
+

machine/installed_machines/sim12_turn_2ax/postprocessor/fanuc_PostConfigurator/oem_ootb_5ax_fanuc.tbc

@@ -0,0 +1,340 @@
+if {[catch {package require tbcload 1.6} err] == 1} {
+    return -code error "[info script]: The TclPro ByteCode Loader is not available or does not support the correct version -- $err"
+}
+tbcload::bceval {
+TclPro ByteCode 2 0 1.7 8.4
+41 0 496 79 0 0 256 0 7 41 41 -1 -1
+496
+w0E<!:B`W!9ytt!*TA9v=|yTv0#>6#4,o9v/c8=!3iA=!9fAs!.lvpv<k60%/HW<!7Qr<!Ge
+Uqv7YQK%:(NH&75o9v8D5>!<J>>!9fAs!72#pvL!f`'/HW<!.Qr<!IG(qv;(ic&@^FB(Dyo9
+v?nt>!X%2?!a^!svCg'w)ExJE'y,@<*0KW<!Z7M?!^+;?!LlJs!Z,xW*dyWT+O.6Uv?nt>!j
+x.@!o'OsvCg'w)l=53-a;@<*0KW<!J,f=!oa7@!QlJs!JFRK%ltWT+Jt5Uv?nt>!g%2?!k'O
+svCg'w)hD_Z)fhro+0KW<!g0n@!_Ih?!LlJs!hU--/_MWT+Jt5Uv?nt>!k%2?!f^!svCg'w)
+lP_Z)a;@<*0KW<!kH=A!_Ih?!LlJs!lwEE0u:XT+Jt5Uv?nt>!3aaA!f^!svCg'w)7N#w2a;
+@<*0KW<!pfjA!%Jh?!QlJs!Njic&&MXT+Jt5Uv?nt>!m):B!k'OsvCg'w)G6^Z)fhro+0KW<
+!AKi<!(Jh?!LlJs!AJ|Tv)VXT+O.6Uv?nt>!w&2?!f^!svfN594Iemo4M(OQ5Q@0362QW<!U
+rQC!Y)dC!bbSv#wGt&:W-_c8vLq9vtXWD!dA3D!#LE!!
+41
+38PpvM=xOwM=xOwSaN1%UaN1%UaN1%UaN1%UaN1%UaN1%x6Th%,!
+41
+>e-OwM=xOwM=xOwUaN1%UaN1%UaN1%UaN1%UaN1%UaN1%Yg*Pw+!
+79
+x
+25
+u^sY?nR'Z?<OFY?-lo(Fpr<JDf!?r@>v
+x
+5
+5+GJ0R!
+x
+25
+u^sY?nR'Z?=OFY?-lo(Fpr<JDf!?r@>v
+x
+19
+u^sY?nR'Z?@5--E56K^FmpD-
+x
+4
+YvQ)<
+x
+17
+H`ZS7jv-H;P3MTA73=JD3v
+x
+3
+ndD-
+x
+22
+#@IIDuV1`FEPMEF/56-E=;2EF@Pw
+x
+3
+P'-)
+x
+16
+H`ZS7jv-H;Y;5cEt`<JD
+x
+9
+w;+Y?l4O:@8v
+i
+1
+x
+11
+_%97AqE7IDUvg+
+x
+35
+u^sY?3DccErvtJ:IZMg9|y,%=rvtJ:IZMg9qqXi9P6c)
+x
+13
+H`ZS7j#mS7gKxhC1v
+x
+13
+@5--E3wj'FvtCkBDv
+x
+3
+!%!-
+x
+18
+@5--E3wj'FvtCkB!%@hC?Yw
+x
+15
+H`ZS7jv-H;Ti&fDp^;-
+x
+36
+.XIIDh*)9Aq,BCFxv|RA-(wSA&3TfD8>d#H'#lDF1oG)F
+x
+19
+hIa:@he`p@mFYjBi7|mAytf+
+i
+0
+x
+14
+s9-x?!1q-Db!VkBJSw
+x
+22
+82_`F+p/CF!YjY?g3IIDh0m*EY(%
+x
+81
+82_`FtX>OBm(+Y?snATAAl9KDp)X/DBwf|=8JfCF,n'Z?.F?<@#;+:@+qTZ?4T(=H3:)E+V`
+w<6!BK(FvpNaE.'aaE3?ffD(Q0bE;v
+x
+31
+X=@U?P8NX6dddU?#k|Z?9cT,E<(vwHSq/q@m3<-
+x
+21
+H`ZS7V?h-:'T_p@;2ccEw1cSA>v
+x
+3
+xIQ,
+x
+14
+Ao.Q8_qVp6Jp|V6UD#
+x
+4
+<^977
+x
+14
+H`ZS7V?h-:`Vep7:uv
+x
+11
+@5--E&Y|mAPY|+
+x
+26
+.F?<@gyEU@wQ5cE3tQfD&@VTAgrnCFN%%
+x
+5
+Ao.Q8d!
+x
+8
+>7Xp6dRMy=
+x
+11
+H`ZS7lIxU?i@w,
+x
+83
+0ot)FYk*Y?u9p;@EPiSA&k54BhWA(F|1J>+0ot)FYk*Y?u9p;@FPiSA&k54BhWA(F^7S>+0o
+t)FYk*Y?u9p;@GPiSA&k54BhWA(F?qJ&
+x
+8
+>Bpu5<I'q6
+x
+151
+w3F/Ds0^Z?+sEiCU_*Y?kW`aEjEVTA1QiSA&k54BhWA(FD;I>+0ot)FYk*Y?9qm>HEPiSA&k
+54BhWA(FEAR>+0ot)FYk*Y?9qm>HFPiSA&k54BhWA(FFGx>+0ot)FYk*Y?9qm>HGPiSA&k54
+B&,7BGu-cOB4&O+Eb.fRAt|2TAfwhgCX.';@vaSCFl0<-
+x
+15
+r!-x?u3uSAkWmIDeI-,
+x
+55
+r!-x?u3uSAkWmID0k>D+hIa:@he`p@mFYjBi7|mA'A#D+b7a:@*.:Z?>A;EF/MMEF&@E-
+x
+16
+H`ZS7lIxU?o-V5BoF5SA
+x
+13
+H`ZS7lIxU?`=Bq@7v
+x
+12
+H`ZS7j#mS7so.6B
+x
+18
+H`ZS7j#mS7imK;@jX:LCNnw
+x
+20
+H`ZS7j#mS7&Jm#H6S@2A,2lDF
+x
+16
+H`ZS7j#mS7u&v/Dnl<JD
+x
+16
+H`ZS7j#mS7|4sp@q3uSA
+x
+15
+H`ZS7jv-H;NN&bEcIQ,
+x
+9
+#a%hCfj><@<v
+x
+14
+H`ZS7jv-H;x>ffDRhw
+x
+189
+)W(`Fy%ap@k-V5Bj9VTAvnK;@3D3'DrHH<@%B>cE!x7hChd|Z?.0B,Es?VTA)BIIDn.jY?2B
+K(FfIBq@m:K;@2-0CF&6FiC'Y#D+1,gfDX.';@fk*Y?.0B,Es?VTA7vMEF(B>cE!x7hChd|Z
+?.0B,Es?VTA7vMEF(B>cE!x7hChd|Z?,l:EFrfR.D)!BCF5+dfDvFm*E'FMTAulSCF9(MEFk
+^sY?%,_`FkWNaEpAP_F?v
+x
+17
+H`ZS7jv-H;xA#-EtE.hC1v
+x
+55
+u-V5B5.!-EtE.hCuV1`FEPMEFhireD3%,!F#+Z8Ajjp-Dv'OaE#@RdDFG;`FmxggCd%g+
+x
+22
+'ji'F#+Z8AoBNaEjk*:@6;hAG@Pw
+x
+304
+h?!eD7#Q)F`^CkB0@^Z?/!iTAsP5cEUqrp@v?ffDvFm*E*k>D+h?!eD7#Q)F`^CkB0@^Z?/!
+iTAn0Bq@3QBfDj+|mA:J;EF)5M&Gp&BfD)plRA'NB,Es:+Y?,uk)F'j&fD%Li'F54fZEk!-8
+ArfR.D)!BCF'ovlBsN`aErfR.D)!BCFs8&kB.6siCs&0CF&6FiC'Y#D+wLIlBq2TfD8>d#H+
+N%QBm(+Y?.0B,Es?VTA5Q?<@rK`aEaRo;@jeEU@-6rTAq|NaE.'aaE,j&fD26sJD?h?fDkRK
+Z?49BCF2!j'F3f1EF`44Y?0g_5B88=iCnNRdD|%BRAmwRdDcRo;@9h/wE&d`aEyI#SA#3BCF
+1h?fDkRKZ?-RIID5T5DF
+x
+250
+l@,SA6*OaEwI-<@e4FU@wQ5cEf?<eD;9SQBn&=mB4Q3<@0V!wHvKfCFvaSCFYF>nAr7+Y?!6
+oCFmrXxG<O,!Fm&fCF'.DTAvDsp@gv|RAw^DTA!l1`F%PFY?-lo(Fpr<JD0|90DoKhgC:%,!
+Fm&fCF'.DTAvDsp@gv|RAw^DTAajbnAiy*:@+qTZ?%X7lB&qsY?0Kk_F)oATAAl9KDYF>nAr
+7+Y?,uk)F.?ffDj%ap@k-V5Bp&BfD7oATAAl9KD)`9fDcCbOBhm5SA)#Q)F8JfCF,n'Z?l@,
+SA4mm*EAFfZE8JlcE!j&fD@Sw
+x
+160
+kki:@0&6cE*mK;@n'RdDFG;`FwCUU@;uk_FvCNaEg3m*E2fbDFHIlcEj3q-D%)#D+'jur@v@
+RdDYV*:@&FuSA+p9Z?1T>cE#mmID*dmlB'gi'F6g)s@8pDTA)Pl^F+pW/Dhd'Z?4sRQBj#Tb
+E`%+Y?u5seD-&oC+'jur@v@RdD%p3mB'^/CF!YjY?-lo(FeN!iC't|7A
+x
+75
+#@IIDuV1`FEPMEF/56-E=;2EF*+G<FlasY?@5--E3wj'F<ZBfD'k|7A4u<+Eui&fDl,B3@(B
+=iC%>+Y?@5--E-Cq-DZyf+
+x
+15
+H`ZS7jv-H;GgwhC`du,
+x
+33
+X=@U?pY_p@vkT;@`YEU@sO,SAg+|7ArsYjB0<0bE@v
+x
+24
+j<OV?2'aaEuwDoA(fTfDtH..DXjj:6
+x
+18
+X=@U?WhvN9ytmX?_%97AN%%
+x
+19
+V`w<6(fTfDtH..DZ+a:@|X2-
+x
+10
+V`w<6hk,)<v/w
+x
+6
+iQ<eDNSw
+x
+14
+1^|R7X:p(<hk,)<v/w
+x
+33
+X=@U?pY_p@vkT;@`YEU@sO,SAg+|7A&pNaE/5M&G1v
+x
+30
+X=@U?jjdU?0g_5Bl4sY?_%97Af7ap@&:lSAY+%
+x
+14
+47Xp6x_NX6PK687nt#
+x
+11
+<Kc87@'(q6qWM*
+x
+5
+;o`'<f!
+x
+9
+E,+F;RNMg9f!
+x
+4
+,CHr@
+x
+0
+
+p
+7 0 48 12 0 0 28 0 4 7 7 -1 -1
+48
+w0E<!-BW<!(?W<!-`vpv0#Gpv.fvpv6<W<!75bpv.o=6#6G:3w.EW<!39*!!
+7
+7b?0%6lr!
+7
+DVGUv5TE!
+12
+x
+6
+q'-W@Dhw
+x
+21
+0g_5Bl4sY?_%97ArNRdDFG;`F@v
+x
+2
+FVw
+x
+4
+wm<eD
+x
+6
+1lo(F^(%
+x
+8
+8JfCFB4uD+
+i
+0
+x
+21
+X=@U?pY_p@vkT;@`YEU@sO,SA>v
+x
+23
+V`w<6biqg9(fTfDtH..DZ+a:@|X2-
+x
+51
+6dV<+wQtc9;Xh'F#wj'FqKRdDm^;:+LdV<++Jvi9/MMEF0F^Z?&XVTA,JbD+5^Ww
+x
+14
+xeb@Gg%vY?@5--E`+%
+x
+28
+X=@U?pY_p@vkT;@`YEU@sO,SA-W1`FEPMEF
+0
+0
+0 1
+21
+0g_5Bl4sY?_%97ArNRdDFG;`F@v
+0 0 9
+x
+25
+V`w<6!BK(FvpNaE.'aaE3?ffD(Q0bE;v
+p
+1 0 7 2 0 0 4 0 2 1 1 -1 -1
+7
+w0E<!)'!!
+1
+z
+1
+'!
+2
+x
+29
+X=@U?jjdU?'FMTA'j&fD26sJD-?ffD(Q0bE;v
+x
+3
+v.E-
+0
+0
+0 0
+x
+15
+rpwhC;Z2b3<?<+EfqT+
+0
+0
+}

machine/installed_machines/sim12_turn_2ax/postprocessor/fanuc_PostConfigurator/sim12_turn_2ax_fanuc.cdl

@@ -0,0 +1,44 @@
+MACHINE Default
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

machine/installed_machines/sim12_turn_2ax/postprocessor/fanuc_PostConfigurator/sim12_turn_2ax_fanuc.def

@@ -0,0 +1,64 @@
+MACHINE Default
+
+INCLUDE {
+$POST_LIB_CURRENT_MACH_DIR/Controller/ctrl_fanuc_base.def
+$POST_LIB_CURRENT_MACH_DIR/Controller/ctrl_fanuc_base.cdl
+$POST_LIB_CURRENT_MACH_DIR/oem_ootb_5ax_fanuc.def
+$POST_LIB_CURRENT_MACH_DIR/sim12_turn_2ax_fanuc.cdl
+$POST_LIB_CURRENT_MACH_DIR/sim12_turn_2ax_fanuc_service.def
+}
+
+FORMATTING
+{
+
+  BLOCK_TEMPLATE auto_tool_change
+  {
+       T[$mom_tool_number]
+       H[$mom_tool_adjust_register]\opt
+       M[$mom_sys_tool_change_code]
+  }
+
+}
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

machine/installed_machines/sim12_turn_2ax/postprocessor/fanuc_PostConfigurator/sim12_turn_2ax_fanuc.psc

@@ -0,0 +1,209 @@
+<?xml version="1.0" encoding="UTF-8"?>
+
+<Configuration>
+  <Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+  <Version>2.0</Version>
+  <MachineName>sim12_turn_2ax_fanuc</MachineName>
+  <Sourcing>
+    <Sequence>
+		<Layer Name="Libraries" ReadOnly="true" SubFolder="Libraries">
+			<Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+			<Template>${UGII_CAM_RESOURCE_DIR}post_configurator/post_template/libraries/libraries.psl</Template>
+			<Version>1.00</Version>
+			<Order>1001</Order>
+			<Scripts>
+				<Filename Name="lib_sourcing" Processing="auto"/>
+				<Filename Name="lib_general" Processing="auto"/>
+				<Filename Name="lib_xml_handling" Processing="auto"/>
+				<Filename Name="lib_msg" Processing="true"/>
+				<Filename Name="lib_file_handling" Processing="true"/>
+				<Filename Name="lib_standard_post_func" Processing="true"/>
+				<Filename Name="lib_document" Processing="true"/>
+				<Filename Include="pretreatment" Name="lib_pretreatment" Processing="auto"/>
+				<Filename Include="pretreatment" Name="lib_pretreatment_post" Processing="auto"/>
+			</Scripts>
+			<DefinedEvents>
+				<Filename Include="pretreatment" Name="lib_pretreatment" Processing="auto"/>
+			</DefinedEvents>
+			<CustomerDialogs>
+			</CustomerDialogs>
+			<Functions>
+			</Functions>
+			<Comments>
+			  <Comment>
+				  <User>Siemens Product Lifecycle Management Software Inc.</User>
+				  <Date>01.01.2019 12:00:00</Date>
+				  <Text>Initial generated by Post Configurator</Text>
+			  </Comment>
+			</Comments>
+		</Layer>
+    	<Layer Name="Fanuc" ReadOnly="true" SubFolder="Controller">
+			<Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+			<Template>${UGII_CAM_RESOURCE_DIR}post_configurator/post_template/controller/fanuc/base/ctrl_fanuc_base.psl</Template>
+			<Version>1.00</Version>
+			<Order>2001</Order>
+			<Scripts>
+				<Filename Name="ctrl_fanuc_base" Processing="true"/>
+				<Filename Name="ctrl_fanuc_base_msg" Processing="true"/>
+			</Scripts>
+			<DefinedEvents>
+				<Filename Include="true" Name="ctrl_fanuc_base" Processing="auto"/>
+			</DefinedEvents>
+			<CustomerDialogs>
+				<Filename Include="true" Name="ctrl_fanuc_base" Processing="auto"/>
+			</CustomerDialogs>
+			<Functions>
+			</Functions>
+			<Comments>
+			  <Comment>
+				  <User>Siemens Product Lifecycle Management Software Inc.</User>
+				  <Date>01.01.2019 12:00:00</Date>
+				  <Text>Initial generated by Post Configurator</Text>
+			  </Comment>
+			</Comments>
+		</Layer>
+		<Layer Name="Machine Tool Builder" ReadOnly="false">
+			<Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+			<Version>1.00</Version>
+			<Order>3001</Order>
+			<Scripts>
+				<Filename Name="sim12_turn_2ax_fanuc_mtb" Processing="true"/>
+			</Scripts>
+			<DefinedEvents>
+			</DefinedEvents>
+			<CustomerDialogs>
+			</CustomerDialogs>
+			<Functions>
+			</Functions>
+			<Comments>
+			  <Comment>
+				  <User>Siemens Product Lifecycle Management Software Inc.</User>
+				  <Date>01.01.2019 12:00:00</Date>
+				  <Text>Initial generated by Post Configurator</Text>
+			  </Comment>
+			</Comments>
+		</Layer>
+		<Layer Name="Fanuc OOTB" ReadOnly="false">
+			<Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+			<Template>${UGII_CAM_RESOURCE_DIR}post_configurator/post_template/controller/fanuc/manufacturer/oem_ootb_5ax_fanuc.psl</Template>
+			<Version>1.00</Version>
+			<Order>4001</Order>
+			<Scripts>
+				<Filename Name="oem_ootb_5ax_fanuc" Processing="true"/>
+			</Scripts>
+			<DefinedEvents>
+				<Filename Name="oem_ootb_5ax_fanuc" Processing="true"/>
+			</DefinedEvents>
+			<CustomerDialogs>
+			</CustomerDialogs>
+			<Functions>
+			</Functions>
+			<Comments>
+			  <Comment>
+				  <User>Siemens Product Lifecycle Management Software Inc.</User>
+				  <Date>01.01.2019 12:00:00</Date>
+				  <Text>Initial generated by Post Configurator</Text>
+			  </Comment>
+			</Comments>
+		</Layer>
+		<Layer Name="Fanuc Sample Machine Level" ReadOnly="false">
+			<Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+			<Template>${UGII_CAM_RESOURCE_DIR}post_configurator/post_template/controller/fanuc/machine/machine_ootb_5ax_fanuc.psl</Template>
+			<Version>1.00</Version>
+			<Order>5001</Order>
+			<Scripts>
+				<Filename Name="machine_ootb_5ax_fanuc" Processing="true"/>
+			</Scripts>
+			<DefinedEvents>
+			</DefinedEvents>
+			<CustomerDialogs>
+			</CustomerDialogs>
+			<Functions>
+			</Functions>
+			<Comments>
+			  <Comment>
+				  <User>Siemens Product Lifecycle Management Software Inc.</User>
+				  <Date>01.01.2019 12:00:00</Date>
+				  <Text>Initial generated by Post Configurator</Text>
+			  </Comment>
+			</Comments>
+		</Layer>
+		<Layer Name="Service" ReadOnly="false">
+			<Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+			<Version>1.00</Version>
+			<Order>8001</Order>
+			<Scripts>
+				<Filename Name="sim12_turn_2ax_fanuc_service_fanuc" Processing="true"/>
+			</Scripts>
+			<DefinedEvents>
+				<Filename Name="sim12_turn_2ax_fanuc_service" Processing="true"/>
+			</DefinedEvents>
+			<CustomerDialogs>
+			</CustomerDialogs>
+			<Functions>
+			</Functions>
+			<Comments>
+			  <Comment>
+				  <User>Siemens Product Lifecycle Management Software Inc.</User>
+				  <Date>01.01.2019 12:00:00</Date>
+				  <Text>Initial generated by Post Configurator</Text>
+			  </Comment>
+			</Comments>
+		</Layer>
+		<Layer Name="Customer" ReadOnly="true">
+			<Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+			<Version>1.00</Version>
+			<Order>9001</Order>
+			<Scripts>
+				<Filename Name="sim12_turn_2ax_fanuc_custom" Processing="true"/>
+			</Scripts>
+			<DefinedEvents>
+			</DefinedEvents>
+			<CustomerDialogs>
+			</CustomerDialogs>
+			<Functions>
+			</Functions>
+			<Comments>
+			  <Comment>
+				  <User>Siemens Product Lifecycle Management Software Inc.</User>
+				  <Date>01.01.2019 12:00:00</Date>
+				  <Text>Initial generated by Post Configurator</Text>
+			  </Comment>
+			</Comments>
+		</Layer>
+	</Sequence>
+  </Sourcing>
+  <History>
+	<Comments>
+		<Comment>
+		  <User>lili</User>
+		  <Date>17.09.2019 17:34:11</Date>
+		  <Text>Initial generated by Post Configurator</Text>
+		</Comment>
+		<Comment>
+		  <User>lili</User>
+		  <Date>17.09.2019 17:34:11</Date>
+		  <Text>'Postprocessor successfully upgraded from version 4.7.1 to version 5.1.0</Text>
+		</Comment>
+		<Comment>
+		  <User>lili</User>
+		  <Date>25.09.2019 21:50:52</Date>
+		  <Text>'Postprocessor successfully upgraded from version 5.1.0 - Release to version 5.2.0</Text>
+		</Comment>
+		<Comment>
+		  <User>lili</User>
+		  <Date>30.03.2020 12:01:33</Date>
+		  <Text>'Postprocessor successfully upgraded from version 5.2.0 - Release to version 5.3.0</Text>
+		</Comment>
+	</Comments>
+    <Customer>
+      <Company/>
+      <Address/>
+      <Contact/>
+      <Phone/>
+      <Fax/>
+      <Mail/>
+    </Customer>
+  </History>
+<Units>Millimeters and Inches</Units>
+</Configuration>

machine/installed_machines/sim12_turn_2ax/postprocessor/fanuc_PostConfigurator/sim12_turn_2ax_fanuc.pui

@@ -0,0 +1 @@
+# this file is intentionally left empty

machine/installed_machines/sim12_turn_2ax/postprocessor/fanuc_PostConfigurator/sim12_turn_2ax_fanuc.tcl

@@ -0,0 +1,322 @@
+set pc_initial_library_release_of_post 50505
+#############################################################################################
+#
+#	Customer Data
+#
+#	Company         :
+#	Address         :
+#	Contact person  :
+#	Phone           :
+#	Fax             :
+#	Mail            :
+#
+#############################################################################################
+#
+#	Copyright 2014-2022 Siemens Product Lifecycle Management Software Inc.
+#				All Rights Reserved.
+#	Copyright (c) 2012-2020 Siemens Industry Software GmbH & Co. KG
+#
+#	Die Quellcodes der Programme sind urheberrechtlich geschuetzt und
+#	duerfen ohne Zustimmung von Siemens Industry Software GmbH & Co. KG weder kopiert noch
+#	fuer andere Zwecke weiterverwendet werden.
+#
+#	The source of the programs is protected by Copyright.
+#	You are not allowed to make any copies or modifications
+#	without consent of Siemens Industry Software GmbH & Co. KG.
+#
+#	Le contenu de ces programmes sont protégés par copyright et ne
+#	peuvent pas être copiés ou réutilisés sans l'agrément de Siemens Industry Software GmbH & Co. KG
+#
+#############################################################################################
+#____________________________________________________________________________________________
+#
+# Procedure debugger
+#____________________________________________________________________________________________
+#
+
+set lib_ge_debug(on) 0
+set lib_ge_debug(proc_watch_list) "MOM* PPLIB* PROC*"
+set lib_ge_debug(var_write_trace_list) "mom_group_name"
+set lib_ge_debug(proc_watch_exclude_list) "MOM_SMART* MOM_evaluate_arg MOM_before_each_add_var MOM_before_load_address"
+#____________________________________________________________________________________________
+set lib_debug_source_of_proc_list 		""
+
+if {![info exists lib_ge_platform]} {
+	set lib_ge_temppath ""
+	if {[info commands MOM_ask_env_var] != ""} {
+		set lib_ge_temppath [MOM_ask_env_var UGII_TMP_DIR]
+	}
+	
+	if {[string match "*windows*" $tcl_platform(platform)]} {
+		set lib_ge_platform 1
+		set lib_ge_slash "\\"
+		if {$lib_ge_temppath == ""} {
+			if {[info exists env(TEMP)]} {
+				set lib_ge_temppath $env(TEMP)
+			} elseif {[info exists env(TMP)]} {
+				set lib_ge_temppath $env(TMP)
+			}
+		}
+	} else {
+		set lib_ge_platform 0
+		set lib_ge_slash "/"
+		if {$lib_ge_temppath == ""} {
+			if {[info exists env(TMPDIR)]} {
+				set lib_ge_temppath $env(TMPDIR)
+			}
+			if {![string length $lib_ge_temppath]} {
+				set lib_ge_temppath "${lib_ge_slash}var${lib_ge_slash}tmp"
+			}
+		}
+	}
+}
+if {![info exists lib_ge_env(tmp_dir)]} {
+	set lib_ge_env(tmp_dir)		[MOM_ask_env_var "UGII_TMP_DIR"]
+}
+if {![string length $lib_ge_env(tmp_dir)]} {
+	set lib_ge_env(tmp_dir) $lib_ge_temppath
+}
+
+#____________________________________________________________________________________________
+# <Documentation>
+#
+# Handling for the default environment variables
+#
+# <Example>
+#
+#____________________________________________________________________________________________
+proc LIB_Shell_environment_handling {} {
+
+	eval global [uplevel #0 info vars]
+
+	# Language file and OS specific values
+	if {![info exists lib_ge_slash]} {global lib_ge_slash}
+	if {![info exists lib_ge_env]} {global lib_ge_env}
+
+	set lib_ge_env(post_pool_dir) 		[LIB_Shell_format_path_names [MOM_ask_env_var "UGII_POST_POOL_DIR_NG"]]
+	set lib_ge_env(cam_post_dir) 		[LIB_Shell_format_path_names [MOM_ask_env_var "UGII_CAM_POST_DIR"]]
+	set lib_ge_env(tmp_dir)                 [LIB_Shell_format_path_names [MOM_ask_env_var "UGII_TMP_DIR"]]
+	if {$lib_ge_env(tmp_dir) == ""} {set lib_ge_env(tmp_dir) $lib_ge_temppath}
+
+	global lib_ge_installed_machines
+	set lib_ge_installed_machines		[info script]
+	set lib_ge_env(installed_machines_dir) 	[LIB_Shell_format_path_names [file dirname $lib_ge_installed_machines]]
+
+	set lib_ge_env(installed_machines_dir,recursively) ""
+	lappend lib_ge_env(installed_machines_dir,recursively) $lib_ge_env(installed_machines_dir)
+
+	set current_dir [pwd]
+	if {![catch {cd [lindex $lib_ge_env(installed_machines_dir,recursively) 0]}]} {
+		if {![catch {set dir [string tolower [glob *]]}]} {
+			foreach e {libraries controller bin} {
+				set index [lsearch -exact $dir $e]
+				if {$index > -1} {
+					set directory [lindex $dir $index]
+					set directory [string toupper [string index $directory 0]][string range $directory 1 end]
+					lappend lib_ge_env(installed_machines_dir,recursively) [LIB_Shell_format_path_names "[lindex $lib_ge_env(installed_machines_dir,recursively) 0]$lib_ge_slash$directory"]
+			        }
+			}
+		}
+	}
+	cd $current_dir
+
+	if {![regexp -nocase -- {\w+} $lib_ge_env(post_pool_dir)]} {set lib_ge_env(post_pool_dir) $lib_ge_env(installed_machines_dir)}
+
+	set lib_ge_env(version_bit)  		[MOM_ask_env_var "UGII_VERSION_BIT"]
+	set lib_ge_env(base_dir)     		[MOM_ask_env_var "UGII_BASE_DIR"]
+
+	set lib_ge_env(major_version)  		[MOM_ask_env_var "UGII_MAJOR_VERSION"]
+	set lib_ge_env(minor_version)     	[MOM_ask_env_var "UGII_MINOR_VERSION"]
+	set lib_ge_env(subminor_version)     	[MOM_ask_env_var "UGII_SUBMINOR_VERSION"]
+
+	if {![info exists lib_ge_dll_version]} {global lib_ge_dll_version}
+	if {$lib_ge_env(minor_version) > 0} {
+		set lib_ge_dll_version "nx$lib_ge_env(major_version)$lib_ge_env(minor_version)"
+	} else {
+		set lib_ge_dll_version "nx$lib_ge_env(major_version)"
+	}
+
+	if {[string match "*windows*" $::tcl_platform(platform)]} {
+		regsub -all "/" $lib_ge_env(base_dir) "\\" lib_ge_env(base_dir)
+	}
+}
+
+#____________________________________________________________________________________________
+# <Internal Documentation>
+#
+# This procedure may be used to format pathnames from unix format in windows
+# format and delete double backslash
+#
+# Output:
+# D:\Temp\mom\debug.out or \\Server\Temp\mom\debug.out
+#
+# e.g.
+# set error [LIB_Shell_format_path_names "D:/Temp/mom/debug.out"]
+#
+# <Example>
+# set error [LIB_Shell_format_path_names "D:/Temp/mom/debug.out"]
+#____________________________________________________________________________________________
+proc LIB_Shell_format_path_names {pathname} {
+
+	global lib_ge lib_ge_platform
+
+	binary scan $pathname H* pathbin
+	if {[info exists lib_ge(format_path,$pathbin,0,0,0)]} {
+		return $lib_ge(format_path,$pathbin,0,0,0)
+	}
+
+	if {[regexp -nocase -- {^[\\\\]|^[\/\/]} $pathname]} {
+		regsub -all "/" $pathname "\\" pathname
+	}
+
+	if {$lib_ge_platform} {
+		regsub -all "/" $pathname "\\" pathname
+		if {![regexp -nocase -- {^\\\\} $pathname]} {set unc 0} else {set unc 1}
+			 while {[regsub -- "(?q)\\\\" $pathname "\\" pathname]} {}
+		if {$unc} {set pathname "\\$pathname"}
+	} elseif {!$lib_ge_platform} {
+		regsub -all "\\\\" $pathname "/" pathname
+		if {![regexp -nocase -- {^//} $pathname]} {set unc 0} else {set unc 1}
+		while {[regsub -- "(?q)//" $pathname "/" pathname]} {}
+		if {$unc} {set pathname "/$pathname"}
+	}
+
+	set lib_ge(format_path,$pathbin,0,0,0) [string trim $pathname]
+	return $lib_ge(format_path,$pathbin,0,0,0)
+
+}
+
+#____________________________________________________________________________________________
+# <Documentation>
+#
+# Handling for the main shell
+#
+# <Example>
+#
+#____________________________________________________________________________________________
+proc LIB_Shell_main {} {
+
+	global lib_ge_env lib_ge_slash
+	global lib_cycle_path sourcefile
+
+	LIB_Shell_environment_handling
+
+	lappend ::lib_ge_monitored_files [LIB_Shell_format_path_names [info script]]
+
+	if {[info commands LIB_GE_source] != "LIB_GE_source"} {
+		set lib_cycle_path 0
+		set searchpath $lib_ge_env(installed_machines_dir,recursively)
+		lappend searchpath $lib_ge_env(post_pool_dir)
+		foreach path $searchpath {
+			if {$lib_cycle_path} {break}
+			foreach ext {.tcl .tbc} {
+				set sourcefile [LIB_Shell_format_path_names "$path${lib_ge_slash}lib_sourcing$ext"]
+				if {[file exists $sourcefile]} {
+					if {[string match ".tbc" $ext]} {
+						MOM_output_to_listing_device "ByteCode Loader is not available, cannot process lib_sourcing$ext (Provid this file not encrypted)"
+						MOM_log_message "ByteCode Loader is not available, cannot process lib_sourcing$ext (Provid this file not encrypted)"
+						MOM_abort "ByteCode Loader is not available, cannot process lib_sourcing$ext (Provid this file not encrypted)"
+					}
+					uplevel #0 {
+
+						if {$::tcl_version >= 8.6} {
+							if {[catch {source -encoding utf-8 $sourcefile} err]} {
+								set lib_source_error 1
+							}
+						} else {
+							if {[catch {source $sourcefile} err]} {
+								set lib_source_error 1
+							}
+						}
+
+						if {[info exists lib_source_error] && $lib_source_error == 1} {
+							if {[info exists ::errorInfo]} {MOM_output_to_listing_device "errorInfo $errorInfo"}
+							MOM_output_to_listing_device "File lib_sourcing $err not loadable"
+							MOM_log_message "File lib_sourcing $err not loadable"
+							MOM_abort "File lib_sourcing not loadable"
+						} else {
+							set lib_ge_debug(lib_sourcing) "$sourcefile"
+							lappend lib_ge_monitored_files "$sourcefile"
+							lappend lib_ge_log_message "\n--> $sourcefile loaded"
+							set lib_cycle_path 1 ; break
+						}
+
+					}
+				}
+			}
+		}
+		if {!$lib_cycle_path} {
+			MOM_output_to_listing_device "File lib_sourcing not found"
+			MOM_log_message "File lib_sourcing not found"
+			MOM_abort "File lib_sourcing not found"
+		}
+	}
+
+	LIB_Shell_init
+
+}
+
+#____________________________________________________________________________________________
+# <Documentation>
+#
+# Handling for the default environment variables
+#
+# <Example>
+#
+#____________________________________________________________________________________________
+proc LIB_Shell_defined_post_environment {} {
+
+	global lib_pp_source_file lib_shell
+
+	#____________________________________________________________________________________________
+	#
+	# NX Post, load files
+	#____________________________________________________________________________________________
+	#
+
+	# There are different ways to source each files
+	#
+	# e.g. Befor LIB_GE_source call
+	# lappend lib_pp_source_file "machine,UGII_CAM_POST_DIR"
+	#
+	# e.g. After LIB_GE_source call
+	# LIB_GE_source "Test" "C:/Temp/;d:/tmp/"
+	#
+	# e.g. To define a searchpath
+	# LIB_GE_source "" "C:/Temp/;UGII_CAM_POST_DIR"
+	# Allowed is the direct path and/or variable
+
+	# This is the call for PB post files
+	# ** internal funktion / Don't remove this line **
+	set lib_pp_source_file ""
+
+	# This is the call the PB post LIB_GE files
+	# ** internal funktion / Don't remove this line **
+	lappend lib_pp_source_file "lib_msg" "lib_file_handling" "lib_standard_post_func" "lib_document"
+
+	# If a XML-file with the same file name found, the referenced files will also loaded
+	LIB_Shell_external_source
+
+	if {![info exists lib_shell(load_loader)] || $lib_shell(load_loader)} {
+		lappend lib_pp_source_file "[file tail [file rootname $::lib_ge_installed_machines]]_custom"
+	} else {
+		MOM_log_message "Custom level isn't loaded"
+	}
+
+
+	#############################################################################################
+
+}
+
+LIB_Shell_main
+
+#############################################################################################
+
+
+
+#############################################################################################
+
+#############################################################################################
+# This is to debug
+#############################################################################################
+if {[llength [info commands LIB_GE_debug]]} {LIB_GE_debug}

machine/installed_machines/sim12_turn_2ax/postprocessor/fanuc_PostConfigurator/sim12_turn_2ax_fanuc_service.def

@@ -0,0 +1,44 @@
+MACHINE TEMPLATE
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

machine/installed_machines/sim12_turn_2ax/postprocessor/fanuc_PostConfigurator/sim12_turn_2ax_fanuc_service_fanuc.tcl

@@ -0,0 +1,107 @@
+set nondecrypted 1
+proc postcon_initialize_sys_service {} {
+uplevel #0 {
+# ########## SYSTEM VARIABLE DECLARATIONS ##############
+# set mom_sys_cir_vector "Vector - Arc Start to Center"
+# set mom_sys_helix_pitch_type "rise_revolution"
+# set mom_sys_zero "0"
+# set mom_sys_opskip_block_leader "/"
+# set mom_sys_seqnum_start "10"
+# set mom_sys_seqnum_incr "10"
+# set mom_sys_seqnum_freq "1"
+# set mom_sys_seqnum_max "9999"
+# set mom_sys_lathe_x_factor "1"
+# set mom_sys_lathe_y_factor "1"
+# set mom_sys_lathe_z_factor "1"
+# set mom_sys_lathe_i_factor "1"
+# set mom_sys_lathe_j_factor "1"
+# set mom_sys_lathe_k_factor "1"
+# set mom_sys_leader(N) "N"
+# set mom_sys_cycle_feed_mode "MMPM"
+# set mom_sys_feed_param(IPM,format) "Feed_IPM"
+# set mom_sys_feed_param(IPR,format) "Feed_IPR"
+# set mom_sys_feed_param(FRN,format) "Feed_INV"
+# set mom_sys_contour_feed_mode(ROTARY) "MMPM"
+# set mom_sys_contour_feed_mode(LINEAR_ROTARY) "MMPM"
+# set mom_sys_feed_param(DPM,format) "Feed_DPM"
+# set mom_sys_rapid_feed_mode(ROTARY) "MMPM"
+# set mom_sys_rapid_feed_mode(LINEAR_ROTARY) "MMPM"
+# set mom_sys_feed_param(MMPM,format) "Feed_MMPM"
+# set mom_sys_feed_param(MMPR,format) "Feed_MMPR"
+# set mom_sys_linearization_method "angle"
+#
+# ####### KINEMATIC VARIABLE DECLARATIONS ##############
+# set mom_kin_4th_axis_direction "MAGNITUDE_DETERMINES_DIRECTION"
+# set mom_kin_4th_axis_incr_switch "OFF"
+# set mom_kin_4th_axis_rotation "standard"
+# set mom_kin_5th_axis_direction "MAGNITUDE_DETERMINES_DIRECTION"
+# set mom_kin_5th_axis_incr_switch "OFF"
+# set mom_kin_5th_axis_rotation "standard"
+# set mom_kin_clamp_time "2.0"
+# set mom_kin_cycle_plane_change_per_axis "0"
+# set mom_kin_cycle_plane_change_to_lower "0"
+# set mom_kin_flush_time "2.0"
+# set mom_kin_linearization_flag "1"
+# set mom_kin_linearization_tol "0.01"
+# set mom_kin_max_dpm "10000"
+# set mom_kin_max_fpm "15000"
+# set mom_kin_max_fpr "1000"
+# set mom_kin_max_frn "1000"
+# set mom_kin_min_dpm "0.0"
+# set mom_kin_min_fpm "0.1"
+# set mom_kin_min_fpr "0.1"
+# set mom_kin_min_frn "0.01"
+# set mom_kin_pivot_gauge_offset "0.0"
+# set mom_kin_rapid_feed_rate "10000"
+# set mom_kin_retract_distance "500"
+# set mom_kin_rotary_axis_method "PREVIOUS"
+# set mom_kin_tool_change_time "12.0"
+# set mom_kin_x_axis_limit "1000"
+# set mom_kin_y_axis_limit "1000"
+# set mom_kin_z_axis_limit "1000"
+}
+}
+postcon_initialize_sys_service
+
+CONF_CTRL_moves set decompose_first_move 0
+
+CONF_CTRL_moves set return_before_first_tool_change_pos {{}}
+
+CONF_CTRL_moves set return_tool_change_pos {{}}
+
+CONF_CTRL_moves set always_center_for_circle 1
+
+CONF_CTRL_tool set auto_change_template {auto_tool_change}
+
+CONF_FANUC_controller set fanuc_control_system System_A
+
+CONF_SPF_file set output_unit_to_ini 4
+
+set ::lib_machine_mode TURN
+CONF_SPF_warning set no_warningoutput {{SMALL ARC; ABORTED TO LINEAR MOVE}}
+
+set ::mom_sys_home_pos(0) 533.400000
+set ::mom_sys_home_pos(1) 0.000000
+set ::mom_sys_home_pos(2) 2114.550000
+
+
+proc ootb_convert_home_pos {} {
+# This proc is used to convert mom_sys_home_pos to inch ane metric units.
+   if {[info exists ::mom_sys_home_pos(0)]} {
+      set ::mom_sys_home_pos_metric(0) $::mom_sys_home_pos(0)
+      set ::mom_sys_home_pos_metric(1) $::mom_sys_home_pos(1)
+      set ::mom_sys_home_pos_metric(2) $::mom_sys_home_pos(2)
+
+      set ::mom_sys_home_pos_inch(0) [expr $::mom_sys_home_pos_metric(0)/25.4]
+      set ::mom_sys_home_pos_inch(1) [expr $::mom_sys_home_pos_metric(1)/25.4]
+      set ::mom_sys_home_pos_inch(2) [expr $::mom_sys_home_pos_metric(2)/25.4]
+
+      unset ::mom_sys_home_pos(0)
+      unset ::mom_sys_home_pos(1)
+      unset ::mom_sys_home_pos(2)
+   }
+}
+
+#This command must be called at very end of ootb service layer.
+ootb_convert_home_pos
+

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/Controller/ctrl_s840d_base.cdl

@@ -0,0 +1,75 @@
+
+MACHINE SIEMENS
+
+
+EVENT high_speed_setting
+{
+   UI_LABEL "Sinumerik CYCLE832"
+   CATEGORY MILL
+   PARAM command_status
+   {
+      TYPE o
+      DEFVAL "Active"
+      OPTIONS "Active","Inactive"
+      UI_LABEL "Status"
+   }
+   PARAM ude_siemens_tolerance_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Tolerance"
+   }
+   PARAM siemens_tol
+   {
+      TYPE d
+      DEFVAL "0.01"
+      TOGGLE Off
+      UI_LABEL "User Defined Tolerance"
+   }
+   PARAM ude_siemens_tolerance_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+   PARAM ude_siemens_hsm
+   {
+      TYPE g
+      DEFVAL "start_open"
+      UI_LABEL "High Speed Machining"
+   }
+   PARAM siemens_compressor
+   {
+      TYPE o
+      DEFVAL "On"
+      OPTIONS "On","Off"
+      UI_LABEL "Compressor"
+   }
+   PARAM siemens_smoothing
+   {
+      TYPE o
+      DEFVAL "On"
+      OPTIONS "On","Off"
+      UI_LABEL "Smoothing"
+   }
+   PARAM siemens_feedforward
+   {
+      TYPE o
+      DEFVAL "On"
+      OPTIONS "On","Off"
+      UI_LABEL "Feed Forward"
+   }
+   PARAM siemens_method
+   {
+      TYPE o
+      DEFVAL "Auto"
+      OPTIONS "Auto","Rough","Semi","Finish"
+      UI_LABEL "Method"
+   }
+   PARAM ude_siemens_hsm_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+}
+
+

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/Controller/ctrl_s840d_base.def

@@ -0,0 +1,5 @@
+
+MACHINE SIEMENS840D
+
+INCLUDE { $UGII_CAM_USER_DEF_EVENT_DIR/ude.cdl }
+

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/Controller/ctrl_s840d_base.tbc

@@ -0,0 +1,535 @@
+if {[catch {package require tbcload 1.6} err] == 1} {
+    return -code error "[info script]: The TclPro ByteCode Loader is not available or does not support the correct version -- $err"
+}
+tbcload::bceval {
+TclPro ByteCode 2 0 1.7 8.4
+96 0 989 144 1 0 476 1 14 96 116 -1 -1
+989
+w0E<!(H&s!/lSs!.EW<!@Iy*'-W&=!@uW<!Ha++'1oJ=!DuW<!>,f=!?2o=!Ik^qv2&5pvV+
+uc/qdic&JjJE'ASo9v8D5>!U:@rvKSa<!Mk2-&V|C?)T9asvccn<vh:P3-Q-TlwAy25.g-^Z
+)d0w!*W4L=!Lnt>!pbB0.g-^Z)d0w!*U(:=!iZZW*d*!%*bP<9+0uS=!j!Fsv<EB`:?9H##F
+5v!!>-9-&^Pro+65uW,eO^r+FF7<vt/86,VFp=!nS^R-^C,9OL9(w)EYTs!g-^Z)d0w!*U(:
+=!c?^Z)PWbsvccn<vf(oQ,X8#>!^^!svOes<!cSa<!#WIL&LtT=!pmI@!wR9tvOb-n-J3WW!
+r8#>!sg@@!rsR@!y,>pvjKnJ/I*<<!i@,>!>,f=!Ik^qv?FA*'iF#!!N_,-/)Odc/.EW<!T%
+:-8ww1%!m@3D!|*e@!Uv.w;Ujr?!-OFA!1xXA!5gjA!9s'B!!MWkwbXLs!Sd_w!:bb>!A6LB
+!d%=)!3Bv!!eW594muPT4Kq365v2`!#<uW<!q_6C!r/Ts!Qdi?!a&|=!WP4pw@btt!a080%M
+e794sqQC!xRS*'`aa|(kvxC!!)dC!mGgB!y#af7q'u<!s6Ms!4lSs!-#|c8!rEK7muPT4k'V
+=!bbSv#sjSyv4,>pv;uW<!gSND!lbt&:@btt!j#y`9wRV=!6GA*'!eiD!!)q#;wRV=!,w5pv
+#YU|:&XV=!o11qw'RMs!.EW<!#n6rw2fPH&2LP|v0`8s!m8=B:/.BE!tUNW<2iSs!(:TE!,'
+9X!(:TE!/'9X!WTOA!*GfE!.S#F!mGgB!+0Ts!5<SpvxSa<!Ewbl>`c`EC6IFN?c(%w2/HW<
+!8vZF!@U@%#2-(3?<aai?Yl^Z)0KW<!B:)G!FF;G!RM8EB>;S`BCfSpv<|_G!K@2G!Tp%H!X
+'8H!y3JH!`?yH!dKnH!@NGt!Uu?HABQWs!IV+I!q;p'#:CvD!|*e@!L#.w;Tdi?!poOI!OAp
+iwe_WT+G'^Z)3FB`:R)Os!T2Xs!6QUfIji?9+0uS=!j!Fsv<EB`:9^jD!Ww5pvJSa<!`Sa<!
+Mk2-&gMp,J65uW,eO^r+FF7<v(-6HJ_bs=!vOC7-OUOA!bZ?jw?_tt!/ul&LJ%2?!ee.BL2o
+n9v;)LV,eO^r+FF7<v7)J|L`k#m#h<<cvifYT4._6>!5t-K!ee.BL0|8X!xSa<!`Sa<!v>|r
+NsTf|(eks9vz
+96
+6P(qv3WW!!C@*Pwpx1@*;OX|()rr*(KCeE'1i&v!;`!!!^C6Y!>&oX!CVYY!>M,Y!>M,Y!JX
+SI&yX@S#FXn*'JO<1%id.4w18P:v@=.<vA7Dw!K|r!!gsn`'
+116
+D>PpvnFah&Fh^R#w?rr!R'Pa'S+_R##6WW!oow4w#6WW!.t/.&363<!T:^Z')w*!!r|NR#cm
+r1%n17n#t.'')nh&')Nv7n#Y<5J&SvDR#xe5:vZWC((B;0L7`,MK&f);K&|.L|#/Ow4&Q=@4
+w
+144
+x
+7
+%6|,EYt|+
+x
+15
+c_dX?sN;oA`t&7AXtB+
+x
+4
+4/;EF
+x
+15
+-WXiC`PTc1vYEU@x4g+
+x
+27
+bVXiC@ESc17,3=63!0S/mhk)F3+uD+gJH&
+x
+19
+c_dX?,#cDF1wviCp<q-DZLc,
+x
+19
+-WXiC!0=JD1*0bEbnEU@x4g+
+x
+19
+c_dX?,#cDF1wviCv'0CFp+g+
+x
+11
+PWqg9@R`)3tL8(
+x
+22
+c_dX?,#cDF1wviCp<q-DwL6<@CSw
+x
+9
+7o(`F%dxlB7v
+x
+27
+c_dX?,#cDF1wviCg@'7A0HFiCtZ7IDUvg+
+x
+12
+PWqg9(w)B+WGgn6
+x
+4
+m'cSA
+x
+4
+v=xhC
+x
+8
+<)lDFnjkSA
+x
+4
+wm<eD
+x
+6
+)^xlBx+%
+x
+9
+njkSAt=sp@1v
+x
+4
+uKhgC
+x
+11
+qEV5B1&?cEm*E-
+x
+1131
+^HSpFja0;@u@#D+3n'd0NbJdAtIa:@G*rZ3D|<JD&No,E5fbDFkg#lBh|2jB0k(E+mC97AhM
+/C+crgm#6y)!Fh!cr@1APQB#?m;@=7G<F8APQB-PpeDx:|7A)W!iCFngm#7pZQHko<JD.I%F
++us_iApm5SA50ylB#A_|3w&|C+b#nW4k!8s+MC97AC|N3I%#um#_Y+7,6!yhCQPVp/%&#D+8
+tLE+)h|7A4GTfD.Q3<@#H>0ApxBq@Fhd#HFngm#vMfCFqs_iApm5SA50ylB#A_|36!yhCC'/
+F+cKxhC+D^eDtfI9>m'cSA,&TbEnjkSAruwlB'E(yG/Ny|3qEV5B1&?cER7oc3>XKV@,-T!?
+?JnlB:b!wH3xfRAErgm#|=faE|'X>wd2g0Ie2g0IQ(GaBD>Ya+e<;oA9v&yG;J)*Fqs_iApm
+5SA50ylB#A_|36!yhC+OUw?Dn<@wy>/:+91VE+eCBkBwm/bE1-=JD*RMZF*L%lBQ/;s+cKxh
+C+D^eD=upT,kg#lBZ@5SAukC&G?yG)F%O!iCbgp-Db!VkBrdTZ?5-9<.xE;JD?JnlB:b!wH3
+xfRA^kqm#e(um#-sQ,E5RbWF*L%lBXEZ%ER6tm#vMfCFqs_iApm5SA50ylB#A_|3r>+dD0bt
+D+us_iApm5SA50ylB#A_|36!yhCC'/F+Z':4wR#Hq@w7DkB+pDTA/Ny|3qEV5B1&?cER7oc3
+dXeK/-RIID,!BCF3+uD+gd|;@urtm#&(KTA8oATAvy/wE7f5DF3+uD+|-<w3Mm%vH9+ME+iQ
+<eD*ZtfA'A#D+cwn=wa.JTA6lpT,eCBkBwm/bE1-=JDpt_iA,X:K0wsY8A`Y+7,i%97Aq_P>
++kW`aE&?0bExrgm#91VE+eCBkBwm/bE1-=JD'7Q|EtuCTA+WpT,eCBkBwm/bE1-=JDpt_iAY
+2vr>Gqgm#)lP)FZh>x3D|<JD&No,E5fbDFx=)>wd9;j@0shTA<MqcBD+dfD'bG@=J>3L@vj`
+aE<cir@5upT,eCBkBwm/bE1-=JD'7Q|E)o|=+eCBkBwm/bE1-=JD'7Q|E1#qm#U`PaD(p`aE
+/k2DFE?)E+.5#D+l*)9Ah^oRA(cN<@r?v>wJNvL8%osdD%Vi|D<^JEF*Q5DFG&Or@.bl(Fn-
+';@kC|7AJ@PQBr/`OBuIYD+0Kk_Fpcw;@C+dfD)v#D+!.2kB%FHSALrgm#7pZQH3>EP8O|U7
+70AccEj7=Y?wRH<@ah>x3D|<JD&No,E5fbDFPa-98<w3j@##QMA*H7q@'RiA3waO11(,?2A_
+@,nAsgC,1TPRRAGw%c1%RA.2-(4iA%M%2ArmpG1t^bJ0mG'5@do(u+B`xQHFngm#0lTfDB!(
+aCrGYKA=u5cE6w_G1Gu'aCrGYKA=u5cE6w_G1_qgm#y!s!
+x
+6
+gpbSAPSw
+x
+13
+eCBkBwm/bE1-=JD@v
+x
+0
+
+x
+6
+1lo(F^(%
+x
+4
+jgTq@
+i
+0
+i
+1
+x
+4
+(iY%G
+x
+13
+H`ZS7Mo297_JvJ:o!
+x
+6
+82_`FWnw
+x
+6
+%RIIDCSw
+x
+3
+Yt|+
+x
+23
+ijkIDUItn7+&Mn6NuVL9ST687BlC%
+x
+5
+ijkIDBv
+x
+16
+Oo.29.Df^<Rbse:Vk,)<
+x
+11
+U`;L9Cl`'<|<?)
+x
+6
+gd|;@b:%
+x
+6
+,Qs/DL+%
+x
+2
+>Kv
+x
+16
+';H2Ask,l@K*hG1M97c1
+x
+8
+w3F/Ds/B(F
+x
+42
+Tw+iAU*4iAL9d)2X-4iAM0.H1K'h,1)/#E2)DuMAK3Ic1-Y;iAgRw
+x
+7
+ld^LCOef+
+x
+7
+5uC`Fb1g+
+x
+2
+6ew
+x
+13
+#(q-DwL6<@J#JaDDv
+x
+5
+5K!eD:v
+x
+5
+0lTfD>v
+x
+5
+WOZ-E1v
+x
+2
+Qew
+x
+6
+Kh5DFHSw
+x
+5
+ekTfD>v
+x
+8
+?2K(FmF5SA
+x
+6
+M'cSAhAv
+x
+21
+-EL:@8y-fD(dZRA/c%UA)'WTA0v
+x
+9
+E;=JD5PD*FK!
+x
+12
+o4jY?)!BCF,Qs/D
+x
+8
+)!BCF,Qs/D
+x
+16
+>A;EFsN;oA/#lcE.&6cE
+x
+4
+(w=JD
+x
+3
+k6W-
+x
+4
+.0B,E
+x
+16
+s@;EFSN;oA/#lcE.&6cE
+x
+5
+1lo(F@v
+x
+5
+r!2kB>v
+x
+9
+3DccE,&MEF1v
+x
+7
+/^,8AY@c,
+x
+9
+g-ur@q<..D1v
+x
+10
+wdmlBvY|;@ISw
+x
+7
+0ot)FOef+
+x
+3
+_e|+
+x
+4
+2WACF
+x
+8
+g-ur@+<0(F
+x
+4
+F;0(F
+x
+11
+0ot)FhHmIDUvg+
+x
+4
+*dmID
+x
+2
+nNv
+x
+10
+0ot)Fp;G%GL(%
+x
+4
+DP)*F
+x
+8
+vVbD+Yk:s+
+x
+1
+C!
+x
+14
+6@(>6K,;s+M'cSAhAv
+x
+36
+-EL:@8y-fD(dZRA/c%UA)'WTAI^n=+*Eo=+mSOcEEik<+
+x
+47
+LwraEH&)p/HIa:@WQ^S@slSCF8bA!=^|xlB20E_;rZ!iCen%h/v=uD+2UWw
+x
+7
+^8Z0/Y#6&
+x
+5
+)lP)F1v
+x
+4
+rmBq@
+x
+3
+Vq|+
+x
+2
+^Lw
+x
+5
+2'aaE@v
+x
+1
+G!
+x
+4
+2u5DF
+x
+2
+xkw
+x
+5
+5BjiC1v
+x
+1
+O!
+x
+8
+uuW/D<ve#H
+x
+15
+1!DVG3Yik.4Yik.^)-&
+x
+9
++jdlB!hpgC1v
+x
+5
+a(|RA8v
+x
+6
+*(XU@Hhw
+x
+5
+Kt(yG@v
+x
+6
+M'cSARAv
+x
+21
+lWK:@8y-fD(dZRA/c%UA)'WTA0v
+x
+7
+0s:kBemD-
+i
+4
+x
+6
+7YDEFTnw
+x
+7
+F%MEFs^c,
+x
+6
+B^>r@Hhw
+x
+6
+BQ?<@PSw
+x
+6
+nimlBRSw
+x
+7
+=W7hCVeo+
+x
+6
+''o(F@Pw
+x
+3
+qm#,
+x
+16
++_;EFVqBxF=WsJDr@hEF
+x
+3
+ma#,
+x
+16
++_;EFVqBxF=WsJD<.fRA
+x
+8
+9oW/DmgY8A
+x
+4
+ld^LC
+x
+6
+/LZ<@T+%
+x
+8
+*XxlBagbSA
+x
+6
+49BCF_(%
+x
+20
+X=@U?nG):@/;2EFq2K(FmF5SA
+x
+10
+M'cSA,nfb;72#
+x
+20
+iuncB=y-fD8oATA//;EFmd|7A
+x
+41
+hLqcB=YpJD;yqcB7APQB1h?fD7l#j@.gVTA>)ZKA-!o^FpgpgC1v
+x
+28
+j<OV?@5--E4-0CFp-%lB63=JDy.oRAtFfRA
+x
+18
+c_dX?w:7hC<JfTA59XeDcHv
+x
+9
+c_dX?w:7hC8v
+x
+7
+8ik)Fh^c,
+i
+2
+x
+17
+X=@U?nG):@gHi'F1^cr@1v
+x
+20
+X=@U?wVTgC#O`aE`OYjB'E(yG
+x
+18
+c_dX?*mi'F1^cr@`^CkBHSw
+x
+4
+so.6B
+x
+5
+,pMTA@v
+x
+13
+c_dX?<Udt-71GJ0M!
+x
+6
+=G5cEZHv
+x
+13
+X=@U?+@h'F1^cr@1v
+x
+4
+,CHr@
+x
+22
+j<OV?mw2PBt|2TAhHi'F.HnlBLYw
+p
+11 0 70 12 0 0 48 0 4 11 11 -1 -1
+70
+nVxR5PEE<!HSa<!(B`W!*TA9v-fSs!4wsr!.lvpv-BW<!/W&=!5`8s!2ir<!+Ki<!6Z/s!3D
+UNw3#Ts!4;kpvv!!
+11
+1uJX!=kUm#6lr!
+11
+I%@n#>DPUv5TE!
+12
+x
+29
+kg#lBZ@5SAs`DTAwJa:@,xmID2iL`F0*v/D1v
+x
+0
+
+x
+28
+j<OV?mw2PBt|2TAhHi'F.HnlBFy0:7o3/|=
+x
+4
+wm<eD
+x
+8
+w3F/Ds/B(F
+x
+21
+X=@U?pY_p@vkT;@`YEU@sO,SA>v
+x
+34
+j<OV?mw2PBt|2TAhHi'F.HnlBFy0:7o3/|=tQ?<@|+%
+x
+85
+7pZQH0oW/DmgY8A`=Bq@Q6EJ:JjUkBnTi'Fk=|7A#NfCF*FV5Bhk,)<s;84IY0HJ:JjUkBnT
+i'Fk=|7A#NfCF*FV5Bhk,)<`U+!F3f1EFIv
+x
+14
+1^|R7X:p(<hk,)<v/w
+x
+28
+X=@U?pY_p@vkT;@`YEU@sO,SA-W1`FEPMEF
+x
+32
+j<OV?mw2PBt|2TAhHi'F.HnlBFy0:7o3/|=csY8A
+x
+83
+7pZQH0oW/DmgY8A`=Bq@Q6EJ:JjUkBnTi'Fk=|7A#NfCF*FV5Bhk,)<s;84IY0HJ:JjUkBnT
+i'Fk=|7A#NfCF*FV5Bhk,)<R,YKAqBA.
+0
+0
+0 1
+12
+w3F/DcI9q@hp^LC
+0 0 10
+x
+15
+rpwhC;Z2b3<?<+EfqT+
+1
+C 1 334 8 -1 -1 347
+0
+}

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/Controller/ctrl_s840d_base_cycle.cdl

@@ -0,0 +1,726 @@
+
+MACHINE SIEMENS
+
+SYS_CYCLE Drill
+{
+   UI_LABEL "Drill"
+   PARAM legend_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Legend"
+   }
+   PARAM siemens_drill_map
+   {
+      TYPE l
+      DEFVAL "sinumerik_840d_cycle81"
+   }
+   PARAM legend_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+}
+
+SYS_CYCLE Drill_Bore
+{
+   UI_LABEL "Drill,Bore"
+   PARAM ude_siemens_cycle_group
+   {
+      TYPE g
+      DEFVAL "START_OPEN"
+      UI_LABEL "Other Parameters"
+   }
+   PARAM siemens_cycle_rff
+   {
+      TYPE d
+      DEFVAL "0.0"
+      TOGGLE Off
+      UI_LABEL "Retract Feed Rate"
+   }
+   PARAM ude_siemens_cycle_group_end
+   {
+      TYPE g
+      DEFVAL "END"
+   }
+   PARAM legend_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Legend"
+   }
+   PARAM siemens_bore_map
+   {
+      TYPE l
+      DEFVAL "sinumerik_840d_cycle85"
+   }
+   PARAM legend_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+}
+
+
+SYS_CYCLE Drill_Bore_Back
+{
+   UI_LABEL "Drill,Bore,Back"
+   PARAM ude_siemens_cycle_group
+   {
+      TYPE g
+      DEFVAL "START_OPEN"
+      UI_LABEL "Retract Distance"
+   }
+   PARAM siemens_cycle_liftoff
+   {
+      TYPE o
+      DEFVAL "Yes"
+      OPTIONS "Yes","No"
+      UI_LABEL "Lift Off(Solution Line)"
+   }
+   PARAM siemens_cycle_rpa
+   {
+      TYPE d
+      DEFVAL "0.0"
+      UI_LABEL "X"
+   }
+   PARAM siemens_cycle_rpo
+   {
+      TYPE d
+      DEFVAL "0.0"
+      UI_LABEL "Y"
+   }
+   PARAM siemens_cycle_rpap
+   {
+      TYPE d
+      DEFVAL "0.0"
+      UI_LABEL "Z"
+   }
+   PARAM ude_siemens_cycle_group_end
+   {
+      TYPE g
+      DEFVAL "END"
+   }
+   PARAM legend_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Legend"
+   }
+   PARAM siemens_bore_back_map
+   {
+      TYPE l
+      DEFVAL "sinumerik_840d_cycle86"
+   }
+   PARAM legend_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+}
+
+
+SYS_CYCLE Drill_Bore_Drag
+{
+   UI_LABEL "Drill,Bore,Drag"
+   PARAM legend_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Legend"
+   }
+   PARAM siemens_bore_drag_map
+   {
+      TYPE l
+      DEFVAL "sinumerik_840d_cycle89"
+   }
+   PARAM legend_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+}
+
+
+SYS_CYCLE Drill_Bore_Manual
+{
+   UI_LABEL "Drill,Bore,Manual"
+   PARAM legend_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Legend"
+   }
+   PARAM siemens_bore_manual
+   {
+      TYPE l
+      DEFVAL "sinumerik_840d_cycle87"
+   }
+   PARAM legend_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+}
+
+
+SYS_CYCLE Drill_Bore_Nodrag
+{
+   UI_LABEL "Drill,Bore,Nodrag"
+   PARAM ude_siemens_cycle_group
+   {
+      TYPE g
+      DEFVAL "START_OPEN"
+      UI_LABEL "Retract Distance"
+   }
+   PARAM siemens_cycle_rpa
+   {
+      TYPE d
+      DEFVAL "0.0"
+      UI_LABEL "X"
+   }
+   PARAM siemens_cycle_rpo
+   {
+      TYPE d
+      DEFVAL "0.0"
+      UI_LABEL "Y"
+   }
+   PARAM siemens_cycle_rpap
+   {
+      TYPE d
+      DEFVAL "0.0"
+      UI_LABEL "Z"
+   }
+   PARAM ude_siemens_cycle_group_end
+   {
+      TYPE g
+      DEFVAL "END"
+   }
+   PARAM legend_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Legend"
+   }
+   PARAM siemens_bore_nodrag_map
+   {
+      TYPE l
+      DEFVAL "sinumerik_840d_cycle86"
+   }
+   PARAM legend_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+}
+
+SYS_CYCLE Drill_Csink
+{
+   UI_LABEL "Drill,Csink"
+   PARAM ude_siemens_cycle_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Other Parameters"
+   }
+   PARAM siemens_cycle_gmode
+   {
+      TYPE o
+      DEFVAL "Depth"
+      OPTIONS "Depth","Diameter"
+      UI_LABEL "Geometrical Output Mode(Solution Line)"
+   }
+   PARAM ude_siemens_cycle_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+   PARAM legend_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Legend"
+   }
+   PARAM siemens_csink_map
+   {
+      TYPE l
+      DEFVAL "sinumerik_840d_cycle82"
+   }
+   PARAM legend_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+}
+
+
+SYS_CYCLE Drill_Deep
+{
+   UI_LABEL "Drill,Deep"
+   PARAM ude_siemens_cycle_group
+   {
+      TYPE g
+      DEFVAL "START_OPEN"
+      UI_LABEL "Other Parameters"
+   }
+   PARAM siemens_cycle_dts_mode
+   {
+      TYPE o
+      DEFVAL "Off"
+      OPTIONS "Off","On","Seconds","Revolutions"
+      UI_LABEL "Top Dwell"
+   }
+   PARAM siemens_cycle_dts
+   {
+      TYPE i
+      DEFVAL "0"
+      UI_LABEL "Top Dwell Value"
+   }
+   PARAM siemens_cycle_o_dtd_mode
+   {
+      TYPE o
+      DEFVAL "Off"
+      OPTIONS "Off","On","Seconds","Revolutions"
+      UI_LABEL "Final Dwell"
+   }
+   PARAM siemens_cycle_o_dtd
+   {
+      TYPE i
+      DEFVAL "0"
+      UI_LABEL "Final Dwell Value"
+   }
+   PARAM siemens_cycle_frf
+   {
+      TYPE d
+      DEFVAL "1"
+      UI_LABEL "Feed Rate Factor"
+   }
+   PARAM siemens_cycle_o_dis1
+   {
+      TYPE d
+      DEFVAL "0.0"
+      TOGGLE Off
+      UI_LABEL "Step Clearance"
+   }
+   PARAM ude_siemens_cycle_group_end
+   {
+      TYPE g
+      DEFVAL "END"
+   }
+   PARAM legend_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Legend"
+   }
+   PARAM siemens_drill_deep_map
+   {
+      TYPE l
+      DEFVAL "sinumerik_840d_cycle83_deep"
+   }
+   PARAM legend_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+}
+
+
+SYS_CYCLE Drill_Deep_Breakchip
+{
+   UI_LABEL "Drill,Deep,BreakChip"
+   PARAM ude_siemens_cycle_group
+   {
+      TYPE g
+      DEFVAL "START_OPEN"
+      UI_LABEL "Other Parameters"
+   }
+   PARAM siemens_cycle_o_dtd_mode
+   {
+      TYPE o
+      DEFVAL "Off"
+      OPTIONS "Off","On","Seconds","Revolutions"
+      UI_LABEL "Final Dwell"
+   }
+   PARAM siemens_cycle_o_dtd
+   {
+      TYPE i
+      DEFVAL "0"
+      UI_LABEL "Final Dwell Value"
+   }
+   PARAM siemens_cycle_frf
+   {
+      TYPE d
+      DEFVAL "1"
+      UI_LABEL "Feed Rate Factor"
+   }
+   PARAM siemens_cycle_o_vrt
+   {
+      TYPE d
+      DEFVAL "0.0"
+      TOGGLE Off
+      UI_LABEL "Step Retract Value"
+   }
+   PARAM ude_siemens_cycle_group_end
+   {
+      TYPE g
+      DEFVAL "END"
+   }
+   PARAM legend_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Legend"
+   }
+   PARAM siemens_drill_breakchip_map
+   {
+      TYPE l
+      DEFVAL "sinumerik_840d_cycle83_breakchip"
+   }
+   PARAM legend_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+}
+
+SYS_CYCLE Drill_Tap
+{
+   UI_LABEL "Drill,Tap"
+   PARAM ude_siemens_thread_group
+   {
+      TYPE g
+      DEFVAL "START_OPEN"
+      UI_LABEL "Pitch"
+   }
+   PARAM siemens_cycle_mpit
+   {
+      TYPE i
+      DEFVAL "3"
+      TOGGLE Off
+      UI_LABEL "Thread Size"
+   }
+   PARAM siemens_cycle_o_ptab
+   {
+      TYPE o
+      DEFVAL "Post Defined"
+      OPTIONS "Post Defined","Millimeter","Groove per Inch","Inch per Revolution","Module(Solution Line)"
+      UI_LABEL "Pitch"
+   }
+   PARAM siemens_cycle_pit
+   {
+      TYPE d
+      DEFVAL "0.0"
+      UI_LABEL "Pitch Value"
+   }
+   PARAM ude_siemens_thread_group_end
+   {
+      TYPE g
+      DEFVAL "END"
+   }
+   PARAM ude_siemens_float_group
+   {
+      TYPE g
+      DEFVAL "START_CLOSED"
+      UI_LABEL "Float Tap Parameters"
+   }
+   PARAM siemens_cycle_sdr
+   {
+      TYPE o
+      DEFVAL "Reversal"
+      OPTIONS "CLW","CCLW","Reversal"
+      UI_LABEL "Spindle Retract Direction"
+   }
+   PARAM siemens_cycle_enc
+   {
+      TYPE o
+      DEFVAL "Use Encoder-Dwell Off"
+      OPTIONS "Use Encoder-Dwell Off","Use Encoder-Dwell On","No Encoder-Feed Rate before Cycle","No Encoder-Feed Rate in Cycle"
+      UI_LABEL "Encoder"
+   }
+   PARAM ude_siemens_float_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+   PARAM legend_float_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Legend"
+   }
+   PARAM siemens_float_tap_map
+   {
+      TYPE l
+      DEFVAL "sinumerik_840d_cycle840"
+   }
+   PARAM legend_float_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+   PARAM ude_siemens_rigid_group
+   {
+      TYPE g
+      DEFVAL "START_OPEN"
+      UI_LABEL "Rigid Tap Parameters"
+   }
+   PARAM siemens_cycle_o_var1
+   {
+      TYPE o
+      DEFVAL "Single Pass"
+      OPTIONS "Single Pass","Break Chip","Remove Chip"
+      UI_LABEL "Type"
+   }
+   PARAM siemens_cycle_poss
+   {
+      TYPE d
+      DEFVAL "0.0"
+      TOGGLE Off
+      UI_LABEL "Spindle Orient Angle"
+   }
+   PARAM siemens_cycle_sst1
+   {
+      TYPE d
+      DEFVAL "0.0"
+      TOGGLE Off
+      UI_LABEL "Spindle Retract Speed"
+   }
+   PARAM siemens_cycle_o_dam
+   {
+      TYPE d
+      DEFVAL "0.0"
+      TOGGLE Off
+      UI_LABEL "Deep Hole Incremental Depth"
+   }
+   PARAM siemens_cycle_o_vrt
+   {
+      TYPE d
+      DEFVAL "0.0"
+      TOGGLE Off
+      UI_LABEL "Break Chip Retract Value"
+   }
+   PARAM ude_siemens_rigid_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+   PARAM legend_rigid_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Legend"
+   }
+   PARAM siemens_rigid_tap_map
+   {
+      TYPE l
+      DEFVAL "sinumerik_840d_cycle84"
+   }
+   PARAM legend_rigid_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+   PARAM ude_siemens_other_group
+   {
+      TYPE g
+      DEFVAL "start_open"
+      UI_LABEL "Other Parameters"
+   }
+   PARAM siemens_cycle_sdac
+   {
+      TYPE o
+      DEFVAL "CLW"
+      OPTIONS "CLW","CCLW","Off"
+      UI_LABEL "Spindle Direction After Cycle"
+   }
+   PARAM siemens_cycle_o_techno
+   {
+      TYPE i
+      DEFVAL "0"
+      TOGGLE Off
+      UI_LABEL "Technological Setting"
+   }
+   PARAM ude_siemens_other_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+}
+
+
+SYS_CYCLE Drill_Tap_Breakchip
+{
+   UI_LABEL "Drill,Tap,Breakchip"
+   PARAM ude_siemens_rigid_group
+   {
+      TYPE g
+      DEFVAL "START_OPEN"
+      UI_LABEL "Rigid Tap Parameters"
+   }
+   PARAM cycle_step_clearance
+   {
+      TYPE d
+      DEFVAL "0.5"
+      UI_LABEL "Step Clearance"
+   }
+   PARAM ude_siemens_rigid_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+   PARAM legend_rigid_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Rigid Tap Legend"
+   }
+   PARAM siemens_rigid_tap_map
+   {
+      TYPE l
+      DEFVAL "sinumerik_840d_cycle84"
+   }
+   PARAM legend_rigid_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+   PARAM ude_siemens_other_group
+   {
+      TYPE g
+      DEFVAL "start_open"
+      UI_LABEL "Other Parameters"
+   }
+   PARAM siemens_cycle_sdac
+   {
+      TYPE o
+      DEFVAL "CLW"
+      OPTIONS "CLW","CCLW","Off"
+      UI_LABEL "Spindle Direction After Cycle"
+   }
+   PARAM siemens_cycle_o_techno
+   {
+      TYPE i
+      DEFVAL "0"
+      TOGGLE Off
+      UI_LABEL "Technological Setting"
+   }
+   PARAM ude_siemens_other_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+}
+
+
+SYS_CYCLE Drill_Tap_Deep
+{
+   UI_LABEL "Drill,Tap,Deep"
+   PARAM legend_rigid_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Rigid Tap Legend"
+   }
+   PARAM siemens_rigid_tap_map
+   {
+      TYPE l
+      DEFVAL "sinumerik_840d_cycle84"
+   }
+   PARAM legend_rigid_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+   PARAM ude_siemens_other_group
+   {
+      TYPE g
+      DEFVAL "start_open"
+      UI_LABEL "Other Parameters"
+   }
+   PARAM siemens_cycle_sdac
+   {
+      TYPE o
+      DEFVAL "CLW"
+      OPTIONS "CLW","CCLW","Off"
+      UI_LABEL "Spindle Direction After Cycle"
+   }
+   PARAM siemens_cycle_o_techno
+   {
+      TYPE i
+      DEFVAL "0"
+      TOGGLE Off
+      UI_LABEL "Technological Setting"
+   }
+   PARAM ude_siemens_other_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+}
+
+
+SYS_CYCLE Drill_Tap_Float
+{
+   UI_LABEL "Drill,Tap,Float"
+   PARAM ude_siemens_float_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Float Tap Parameters"
+   }
+   PARAM siemens_cycle_enc
+   {
+      TYPE o
+      DEFVAL "Use Encoder-Dwell Off"
+      OPTIONS "Use Encoder-Dwell Off","Use Encoder-Dwell On","No Encoder-Feed Rate before Cycle","No Encoder-Feed Rate in Cycle"
+      UI_LABEL "Encoder"
+   }
+   PARAM ude_siemens_float_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+   PARAM legend_float_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Float Tap Legend"
+   }
+   PARAM siemens_float_tap_map
+   {
+      TYPE l
+      DEFVAL "sinumerik_840d_cycle840"
+   }
+   PARAM legend_float_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+   PARAM ude_siemens_other_group
+   {
+      TYPE g
+      DEFVAL "start_open"
+      UI_LABEL "Other Parameters"
+   }
+   PARAM siemens_cycle_sdac
+   {
+      TYPE o
+      DEFVAL "CLW"
+      OPTIONS "CLW","CCLW","Off"
+      UI_LABEL "Spindle Direction After Cycle"
+   }
+   PARAM siemens_cycle_o_techno
+   {
+      TYPE i
+      DEFVAL "0"
+      TOGGLE Off
+      UI_LABEL "Technological Setting"
+   }
+   PARAM ude_siemens_other_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+}
+

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/Controller/ctrl_sinumerik_base.cdl

@@ -0,0 +1,501 @@
+
+MACHINE SINUMERIK
+
+EVENT auxfun
+{
+   UI_LABEL "Auxfun"
+   PARAM command_status
+   {
+      TYPE o
+      DEFVAL "Active"
+      OPTIONS "Active","Inactive","User Defined"
+      UI_LABEL "Status"
+   }
+   PARAM auxfun
+   {
+      TYPE   i
+      DEFVAL "0"
+      UI_LABEL "Auxfun Value"
+   }
+   PARAM auxfun_text
+   {
+      TYPE   s
+      TOGGLE Off
+      UI_LABEL "Text"
+   }
+}
+
+EVENT coolant_off
+{
+   UI_LABEL "Coolant Off"
+   CATEGORY MILL DRILL LATHE
+
+   PARAM command_status
+   {
+      TYPE o
+      DEFVAL "Active"
+      OPTIONS "Active","Inactive","User Defined"
+      UI_LABEL "Status"
+   }
+   PARAM coolant_text
+   {
+      TYPE   s
+      TOGGLE Off
+      UI_LABEL "Text"
+   }
+}
+
+EVENT set_pocket4_parameters
+{
+   UI_LABEL "Set POCKET4 Parameters"
+   CATEGORY MILL DRILL
+
+   PARAM command_status
+   {
+      TYPE o
+      DEFVAL "Active"
+      OPTIONS "Active","Inactive","User Defined"
+      UI_LABEL "Status"
+   }
+   PARAM pocket4_maximum_infeed_width
+   {
+      TYPE   d
+      DEFVAL "0.0000"
+      UI_LABEL "Maximum Infeed Width"
+   }
+   PARAM pocket4_helical_path_radius
+   {
+      TYPE   d
+      DEFVAL "2.0000"
+      UI_LABEL "Helical Path Radius"
+   }
+}
+
+EVENT dwell
+{
+   POST_EVENT "delay"
+   UI_LABEL "Dwell"
+
+   PARAM command_status
+   {
+      TYPE o
+      DEFVAL "Active"
+      OPTIONS "Active","Inactive","User Defined"
+      UI_LABEL "Status"
+   }
+   PARAM delay_mode
+   {
+      TYPE o
+      DEFVAL "Seconds"
+      OPTIONS "Seconds","Revolutions"
+      UI_LABEL "Dwell Type"
+   }
+   PARAM delay_value
+   {
+      TYPE   d
+      DEFVAL "10.0000"
+      UI_LABEL "Dwell Value"
+   }
+   PARAM delay_text
+   {
+      TYPE   s
+      TOGGLE Off
+      UI_LABEL "Text"
+   }
+}
+
+EVENT insert
+{
+   UI_LABEL "Insert"
+
+   PARAM Instruction
+   {
+      TYPE    s
+   }
+}
+
+EVENT length_compensation
+{
+   UI_LABEL "Tool Length Compensation"
+   CATEGORY MILL DRILL LATHE
+
+   PARAM command_status
+   {
+      TYPE o
+      DEFVAL "Active"
+      OPTIONS "Active","Inactive","User Defined"
+      UI_LABEL "Status"
+   }
+   PARAM Overide_operation_param
+   {
+      TYPE   b
+      DEFVAL "TRUE"
+      UI_LABEL "Override Operation Parameter"
+   }
+   PARAM length_comp_register
+   {
+      TYPE   i
+      DEFVAL "2"
+      UI_LABEL "Adjust Register"
+   }
+   PARAM length_comp_register_text
+   {
+      TYPE   s
+      TOGGLE Off
+      UI_LABEL "Text"
+   }
+}
+
+EVENT opskip_on
+{
+   UI_LABEL "Optional Skip On"
+
+   PARAM command_status
+   {
+      TYPE o
+      DEFVAL "Active"
+      OPTIONS "Active","Inactive","User Defined"
+      UI_LABEL "Status"
+   }
+   PARAM opskip_text
+   {
+      TYPE   s
+      TOGGLE Off
+      UI_LABEL "Text"
+   }
+}
+
+EVENT opskip_off
+{
+   UI_LABEL "Optional Skip Off"
+
+   PARAM command_status
+   {
+      TYPE o
+      DEFVAL "Active"
+      OPTIONS "Active","Inactive","User Defined"
+      UI_LABEL "Status"
+   }
+   PARAM opskip_text
+   {
+      TYPE   s
+      TOGGLE Off
+      UI_LABEL "Text"
+   }
+}
+
+EVENT opstop
+{
+   UI_LABEL "Optional Stop"
+
+   PARAM command_status
+   {
+      TYPE o
+      DEFVAL "Active"
+      OPTIONS "Active","Inactive","User Defined"
+      UI_LABEL "Status"
+   }
+   PARAM opstop_text
+   {
+      TYPE   s
+      TOGGLE Off
+      UI_LABEL "Text"
+   }
+}
+
+EVENT prefer_solution
+{
+	UI_LABEL "Preferred Solution"
+	PARAM command_status
+	{
+		TYPE o
+		DEFVAL "Active"
+		OPTIONS "Active","Inactive","User Defined"
+		UI_LABEL "Status"
+	}
+	PARAM prefer_axis
+	{
+		TYPE o
+		DEFVAL "OFF"
+		OPTIONS "OFF", "A", "B", "C"
+		UI_LABEL "Preferred Axis"
+	}
+	PARAM prefer_output_min
+	{
+		TYPE d
+		DEFVAL "0.000000"
+		TOGGLE Off
+		UI_LABEL "Preferred Range Minimum"
+	}
+	PARAM prefer_output_max
+	{
+		TYPE d
+		DEFVAL "0.000000"
+		TOGGLE Off
+		UI_LABEL "Preferred Range Maximum"
+	}
+}
+
+
+EVENT prefun
+{
+   UI_LABEL "Prefun"
+
+   PARAM command_status
+   {
+      TYPE o
+      DEFVAL "Active"
+      OPTIONS "Active","Inactive","User Defined"
+      UI_LABEL "Status"
+   }
+   PARAM prefun
+   {
+      TYPE   i
+      DEFVAL "0"
+      UI_LABEL "Prefun Value"
+   }
+   PARAM prefun_text
+   {
+      TYPE   s
+      TOGGLE Off
+      UI_LABEL "Text"
+   }
+}
+
+EVENT rotate
+{
+   UI_LABEL "Rotate"
+   CATEGORY MILL DRILL LATHE
+
+   PARAM command_status
+   {
+      TYPE o
+      DEFVAL   "Active"
+      OPTIONS  "Active","Inactive","User Defined"
+      UI_LABEL "Status"
+   }
+   PARAM rotate_axis_type
+   {
+      TYPE o
+      DEFVAL   "Table"
+      OPTIONS  "Table","Head","Aaxis","Baxis","Caxis","Fourth_Axis","Fifth_Axis"
+      UI_LABEL "Rotation Axis"
+   }
+   PARAM rotation_mode
+   {
+      TYPE o
+      DEFVAL   "None"
+      OPTIONS  "None","Angle","Absolute","Incremental"
+      UI_LABEL "Type"
+   }
+   PARAM rotation_direction
+   {
+      TYPE   o
+      DEFVAL   "CLW"
+      OPTIONS  "CLW","CCLW","NONE"
+      UI_LABEL "Direction"
+   }
+   PARAM rotation_angle
+   {
+      TYPE   d
+      DEFVAL   "0.0000"
+      TOGGLE   On
+      UI_LABEL "Angle"
+   }
+   PARAM rotation_reference_mode
+   {
+      TYPE   b
+      DEFVAL "FALSE"
+      UI_LABEL "Reference Only - No Output"
+   }
+   PARAM rotation_text
+   {
+      TYPE   s
+      TOGGLE   Off
+      UI_LABEL "Text"
+   }
+}
+
+EVENT sequence_number
+{
+   UI_LABEL "Sequence Number"
+
+   PARAM command_status
+   {
+      TYPE o
+      DEFVAL "Active"
+      OPTIONS "Active","Inactive","User Defined"
+      UI_LABEL "Status"
+   }
+   PARAM sequence_mode
+   {
+      TYPE o
+      DEFVAL "N"
+      OPTIONS "N","Off","On","Auto"
+      UI_LABEL "Number Type"
+   }
+   PARAM sequence_number
+   {
+      TYPE   i
+      DEFVAL "0"
+      UI_LABEL "Number"
+   }
+   PARAM sequence_increment
+   {
+      TYPE   i
+      DEFVAL "0"
+      UI_LABEL "Increment"
+   }
+   PARAM sequence_frequency
+   {
+      TYPE   i
+      DEFVAL "0"
+      UI_LABEL "Frequency"
+   }
+   PARAM sequence_text
+   {
+      TYPE   s
+      TOGGLE Off
+      UI_LABEL "Text"
+   }
+}
+
+EVENT stop
+{
+   UI_LABEL "Stop"
+
+   PARAM command_status
+   {
+      TYPE o
+      DEFVAL "Active"
+      OPTIONS "Active","Inactive","User Defined"
+      UI_LABEL "Status"
+   }
+   PARAM stop_text
+   {
+      TYPE   s
+      TOGGLE Off
+      UI_LABEL "Text"
+   }
+}
+
+EVENT text
+{
+   UI_LABEL "User Defined"
+
+   PARAM user_defined_text
+   {
+      TYPE   s
+      TOGGLE On
+      UI_LABEL "User Defined Command"
+   }
+}
+
+EVENT structure_representation_mode
+{
+   UI_LABEL "Operation representation in collpased mode"
+   PARAM output_status
+   {
+      TYPE o
+      DEFVAL "On"
+      OPTIONS "On","Off"
+      UI_LABEL "Output"
+   }
+   PARAM display_name
+   {
+      TYPE s
+      TOGGLE Off
+      UI_LABEL "Display name"
+   }
+   PARAM readonly_status
+   {
+      TYPE o
+      DEFVAL "Editable"
+      OPTIONS "Editable","Readonly"
+      UI_LABEL "Status"
+   }
+   PARAM type_status
+   {
+      TYPE o
+      DEFVAL "Operation"
+      OPTIONS "Header","Operation"
+      UI_LABEL "Status"
+   }
+}
+
+EVENT LIB_manual_CYCLE800_setting
+{
+   UI_LABEL "Manual CYCLE800 setting"
+   PARAM lib_cycle800_dir
+   {
+      TYPE o
+      DEFVAL "Auto"
+      OPTIONS "Auto","+1","-1"
+      UI_LABEL "Direction"
+   }
+}
+
+EVENT program_control
+{
+	UI_LABEL "Program Control"
+	CATEGORY MILL DRILL
+	PARAM ctrl_program_control
+	{
+		TYPE b
+		DEFVAL "FALSE"
+		UI_LABEL "Call External Subroutine for Each Operation"
+	}
+}
+
+EVENT dnc_header
+{
+   UI_LABEL "DNC Header"
+   CATEGORY MILL DRILL LATHE WEDM
+   PARAM command_status
+   {
+      TYPE o
+      DEFVAL "Active"
+      OPTIONS "Active","Inactive","User Defined"
+      UI_LABEL "Status"
+   }
+   PARAM dnc_machine_name
+   {
+      TYPE s
+      TOGGLE Off
+      UI_LABEL "Machine Name"
+   }
+   PARAM dnc_program_name
+   {
+      TYPE s
+      TOGGLE Off
+      UI_LABEL "Program Name"
+   }
+   PARAM dnc_data_type
+   {
+      TYPE s
+      DEFVAL "MPF"
+      TOGGLE On
+      UI_LABEL "Data Type"
+   }
+   PARAM dnc_version_number
+   {
+      TYPE i
+      DEFVAL "1"
+      TOGGLE On
+      UI_LABEL "Version Number"
+   }
+   PARAM dnc_release_number
+   {
+      TYPE i
+      DEFVAL "1"
+      TOGGLE On
+      UI_LABEL "Release Number"
+   }
+   PARAM dnc_user_name
+   {
+      TYPE s
+      TOGGLE Off
+      UI_LABEL "User Name"
+   }
+}
+

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/Controller/ctrl_sinumerik_base_msg.tbc

@@ -0,0 +1,207 @@
+if {[catch {package require tbcload 1.6} err] == 1} {
+    return -code error "[info script]: The TclPro ByteCode Loader is not available or does not support the correct version -- $err"
+}
+tbcload::bceval {
+TclPro ByteCode 2 0 1.7 8.4
+29 0 397 62 0 0 120 0 7 29 29 -1 -1
+397
+w0E<!(H&s!/lSs!.EW<!.Qr<!=>YQ#3,tl#@|yTv0#>6#=8YUvF-1((+Ki<!;eQjw6)Ks!H=
+;u!.lvpv62T=!8KW<!J)X<!.Qr<!E13-&3,tl#@|yTv0#>6#DbCVvMWp((+Ki<!;eQjw=>Ks
+!OR;u!.lvpv62T=!?KW<!Q)X<!.Qr<!LpFB(B^a|(@|yTv0#>6#L=7WvU2d)(+Ki<!;eQjwE
+VKs!Wj;u!.lvpv62T=!GKW<!Y)X<!.Qr<!Tcur*JQ;9+@|yTv0#>6#Tm*Xv|bW*(+Ki<!;eQ
+jwMnKs!_-<u!.lvpv62T=!OKW<!a)X<!.Qr<!yVON-RDji-@|yTv0#>6#yHsXve=K+(+Ki<!
+;eQjwU1Ls!gE<u!.lvpv62T=!WKW<!i)X<!.Qr<!dI)*0Z7DE0@|yTv0#>6#d#gYvmm>,(+K
+i<!;eQjw|ILs!o|<u!dgU=!s<!%*=rtu2a99<3?/VW30oSs!EM7945un9v0xPT4z
+29
+?Lrg%|0Bh%|0Bh%|0Bh%|0Bh%|0Bh%M_bpv#!
+29
+VpAh%|0Bh%|0Bh%|0Bh%|0Bh%|0Bh%'ZZ/&)!
+62
+x
+7
+%6|,EYt|+
+x
+15
+c_dX?sN;oA`t&7AXtB+
+x
+4
+4/;EF
+x
+23
+-WXiC!0=JD1*0bEbnEU@e:+Y?i@w,
+x
+35
+bVXiCVw<JD1*0bEBM4=63!0S/6`rO/mhk)F3+uD+cMc&
+x
+7
+c_dX?i@w,
+x
+5
+71GJ0M!
+x
+22
+c_dX?,#cDF1wviCp<q-DwL6<@CSw
+x
+5
+=G5cE1v
+x
+35
+O7a:@(?#j@*C?<@l0p|;m!lSAsgs`:.en|;8G@BGZ1g+
+x
+6
+;i7UAByw
+x
+44
+ivcDF-D_`F0Y#D+69=iCGS2NDCxVE+xER.D3FME++OGA+iGoCF'4DTA
+x
+7
+,'IIDfF-,
+x
+28
+ivcDF-CVE+xER.D3FME++OGA+iGoCF'4DTA
+x
+6
+F+MEFByw
+x
+40
+R9R.D-#sJDwaSCFA62E+31VE+xER.D3FME++OGA+iGoCF'4DTA
+x
+8
+39V5B(mIQB
+x
+8
+6|<JD*mIQB
+x
+39
+f@TC+2UVTAG!Uf_M.?iBrZmIDQjcM9+)3_Dp?7hC5/;EFn^c,
+x
+7
+6BDTAxk,,
+x
+47
+q7YhCGF2`F<MCiCiMWKF-#sJDwaSCFtBp|;m!lSAsgs`:.en|;8G@BGZ1g+
+x
+7
+7l/bE^4c,
+x
+39
+`4DEFc-?iBrZmIDQjcM9Qc7cD*gZ<@/2REC*C?<@%7HSAg@c,
+x
+10
+DVTKDpWxlBFnw
+x
+55
+LrHiEvQ7VCHG^e_`1QSA'!@;@-E|fDpwZW@wCQC+xER.D3FME++OGA+:!EoA9E0bEe4Q,
+x
+8
+73?<@q6IID
+x
+31
+avcDFvU?<@lXo|;m!lSAsgs`:.en|;8G@BGZ1g+
+x
+9
+4K*+Et5K(F1v
+x
+51
+LWebjVfD`JO_glLPfy,jN5E`Ja-lRTU2>-jEap|;m!lSAsgs`:.en|;8G@BGZ1g+
+x
+7
+E_5cEV4c,
+x
+49
+_.s'm0sj0QwaZ;S@B&L+>Xe|lo@HsMpP4lUc'GSA+QG)F+Ayh9jTCoA60aaE1v
+x
+10
+Hh5cEwvMkBFnw
+x
+35
+b%REC*C?<@9q3'D^Uo|;m!lSAsgs`:.en|;8G@BGZ1g+
+x
+7
+D8=iCfF-,
+x
+37
+q(Q)F;Vi|D5;sJD,<GDFc'GSA+QG)F+Ayh9jTCoA60aaE1v
+x
+11
+Jn5cE=i>_F_4g+
+x
+43
+f1ccEwiO.D-#sJD0EffD,oW/DkKo|;m!lSAsgs`:.en|;8G@BGZ1g+
+x
+8
+SL2*F#7IID
+x
+60
+AXj<^*iBgYX<.@KTwM^JL!AgYeR0vdxSZ#d3Q@CdQ>%Cd!^4H+xER.D3FME++OGA+iGoCF'4
+DTA
+x
+14
+B&v/Dk%ap@q3uSAOSw
+x
+30
+ZbRdk(RdfZd.?iBrZmIDQjcM9Qc7cD*gZ<@NSw
+x
+7
+GJseDdvH,
+x
+49
+^3Bf_MsZJF&Q3<@1.TC+69=iCQS2NDoLx8Vc'GSA+QG)F+Ayh9jTCoA60aaE1v
+x
+10
+GJseD*L7lBFnw
+x
+49
+q(Q)F>Bo8/7/vNCIOoPN/Y#D+0g_5B+?>)F6ti|D,aR.Dm-?iBrZmIDQjcM9n!
+x
+8
+=9p;@*mIQB
+x
+56
+sBDE+wQ#gDP|-wEn&Y5B&V#D+#Z#j@*C?<@3@)E+-+uD+xER.D3FME++OGA+iGoCF'4DTA
+x
+8
+H2rTAulIQB
+x
+39
+N0YPDn^5SA5JgeD&=MLCjLo|;m!lSAsgs`:.en|;8G@BGZ1g+
+x
+13
+@H-<@xCbOB'6K(F1v
+x
+30
+*Ml_kI/^`yT.?iBrZmIDQjcM9Qc7cD*gZ<@NSw
+x
+8
+TIlcE'mIQB
+x
+44
+bL,MF&btD+xER.D3FME++OGA+piP-``IC,Zs,%RDf?C:@rCs`FPfGo/
+x
+11
+o4jY?8ik)Fh^c,
+x
+3
+f;Q&
+x
+5
+sB-<@Ev
+x
+3
+ndD-
+x
+33
+X=@U?*7MaEomK;@gKi'Fn^(kBy%ap@id,<@&?0bE?v
+x
+3
+bdD-
+i
+4
+i
+0
+x
+0
+
+0
+0
+}

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/Libraries/lib_pretreatment.def

@@ -0,0 +1,193 @@
+
+MACHINE PRETREATMENT
+
+FORMATTING
+{
+
+  WORD_SEPARATOR " "
+  END_OF_LINE "\135"
+  SEQUENCE sequence_number 10 10 1 99999
+
+  FORMAT AbsCoord "&__5.3_"
+  FORMAT Coordinate "&__5.3_"
+  FORMAT Digit_2 "&_02_00"
+  FORMAT Digit_4 "&_04_00"
+  FORMAT Digit_5 "&__5_00"
+  FORMAT Dwell_SECONDS "&__5.3_"
+  FORMAT EventNum "&+03_00"
+  FORMAT Feed "&__7.2_"
+  FORMAT Feed_DPM "&__5.2_"
+  FORMAT Feed_FRN "&__5.3_"
+  FORMAT Feed_INV "&__5.3_"
+  FORMAT Feed_IPM "&__4.1_"
+  FORMAT Feed_IPR "&__1.4_"
+  FORMAT Feed_MMPM "&__5.0_"
+  FORMAT Feed_MMPR "&__2.3_"
+  FORMAT Hcode "&_02_00"
+  FORMAT Rev "&__4_00"
+  FORMAT Rotary "&__5.5_"
+  FORMAT String "%s"
+  FORMAT Tcode "&_02_00"
+  FORMAT Zero_int "&_01_0_"
+  FORMAT Zero_real "&_01.10"
+
+  ADDRESS N
+  {
+      FORMAT      String
+      FORCE       always
+      LEADER      [$mom_sys_leader(N)]
+  }
+  ADDRESS G_motion
+  {
+      FORMAT      String
+      FORCE       off
+      LEADER      [$mom_sys_leader(G)]
+  }
+  ADDRESS X
+  {
+      FORMAT      Coordinate
+      FORCE       always
+      LEADER      [$mom_sys_leader(X)]
+      ZERO_FORMAT Zero_real
+  }
+  ADDRESS Y
+  {
+      FORMAT      Coordinate
+      FORCE       off
+      LEADER      [$mom_sys_leader(Y)]
+      ZERO_FORMAT Zero_real
+  }
+
+  ADDRESS Z
+  {
+      FORMAT      Coordinate
+      FORCE       off
+      LEADER      [$mom_sys_leader(Z)]
+      ZERO_FORMAT Zero_real
+  }
+
+  ADDRESS fourth_axis
+  {
+      FORMAT      Rotary
+      FORCE       off
+      LEADER      [$mom_sys_leader(fourth_axis)]
+      ZERO_FORMAT Zero_real
+  }
+
+  ADDRESS fifth_axis
+  {
+      FORMAT      Rotary
+      FORCE       off
+      LEADER      [$mom_sys_leader(fifth_axis)]
+      ZERO_FORMAT Zero_real
+  }
+  ADDRESS I
+  {
+      FORMAT      Coordinate
+      FORCE       always
+      LEADER      [$mom_sys_leader(I)]
+      ZERO_FORMAT Zero_real
+  }
+
+  ADDRESS J
+  {
+      FORMAT      Coordinate
+      FORCE       always
+      LEADER      [$mom_sys_leader(J)]
+      ZERO_FORMAT Zero_real
+  }
+
+  ADDRESS K
+  {
+      FORMAT      Coordinate
+      FORCE       always
+      LEADER      [$mom_sys_leader(K)]
+      ZERO_FORMAT Zero_real
+  }
+
+  ADDRESS S
+  {
+      FORMAT      Zero_int
+      FORCE       always
+      LEADER      "S"
+  }
+
+
+	BLOCK_TEMPLATE sequence_number
+	{
+		N[ ]
+	}
+	BLOCK_TEMPLATE sequence_number_turbo
+	{
+		N[ ]
+	}
+	BLOCK_TEMPLATE circular_move_turbo
+	{
+		G_motion[$mom_sys_circle_code(string)]
+		X[^POSX]
+		Y[^POSY]
+		Z[^POSZ]
+		fourth_axis[^POS4]
+		fifth_axis[^POS5]
+		S[$mom_spindle_speed]
+	}
+	BLOCK_TEMPLATE linear_move_turbo
+	{
+		G_motion[$mom_sys_linear_code]
+		X[^POSX]
+		Y[^POSY]
+		Z[^POSZ]
+		fourth_axis[^POS4]
+		fifth_axis[^POS5]
+		S[$mom_spindle_speed]
+	}
+	BLOCK_TEMPLATE rapid_move_turbo
+	{
+		G_motion[$mom_sys_rapid_code]
+		X[^POSX]
+		Y[^POSY]
+		Z[^POSZ]
+		fourth_axis[^POS4]
+		fifth_axis[^POS5]
+		S[$mom_spindle_speed]
+	}
+	BLOCK_TEMPLATE circular_move
+	{
+		G_motion[$mom_sys_circle_code(string)]
+		X[$mom_mcs_goto(0)]
+		Y[$mom_mcs_goto(1)]
+		Z[$mom_mcs_goto(2)]
+		fourth_axis[$mom_out_angle_pos(0)]
+		fifth_axis[$mom_out_angle_pos(1)]
+		S[$mom_spindle_speed]
+	}
+	BLOCK_TEMPLATE linear_move
+	{
+		G_motion[$mom_sys_linear_code]
+		X[$mom_mcs_goto(0)]
+		Y[$mom_mcs_goto(1)]
+		Z[$mom_mcs_goto(2)]
+		fourth_axis[$mom_out_angle_pos(0)]
+		fifth_axis[$mom_out_angle_pos(1)]
+		S[$mom_spindle_speed]
+	}
+	BLOCK_TEMPLATE rapid_move
+	{
+		G_motion[$mom_sys_rapid_code]
+		X[$mom_mcs_goto(0)]
+		Y[$mom_mcs_goto(1)]
+		Z[$mom_mcs_goto(2)]
+		fourth_axis[$mom_out_angle_pos(0)]
+		fifth_axis[$mom_out_angle_pos(1)]
+		S[$mom_spindle_speed]
+	}
+	BLOCK_TEMPLATE rapid_move_drill
+	{
+		G_motion[$mom_sys_rapid_code]
+		X[$mom_cycle_feed_to_pos(0)]
+		Y[$mom_cycle_feed_to_pos(1)]
+		Z[$mom_cycle_feed_to_pos(2)]
+		S[$mom_spindle_speed]
+	}
+}
+

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/Libraries/lib_pretreatment.tcl

@@ -0,0 +1,535 @@
+####C#U#S#T#O#M##M#E#T#A##I#N#F#O#R#M#A#T#I#O#N##############################################
+#
+#	Customer Data
+#
+#	Company         :
+#	Address         :
+#	Contact person  :
+#	Phone           :
+#	Fax             :
+#	Mail            :
+#
+####S#T#A#R#T##C#H#A#N#G#E##H#I#S#T#O#R#Y####################################################
+#
+#	Last changes:	01.02.2011 - UR  001 Initial Release and Installation
+#			23.08.2013 - UR  002 Add keywords for comment lines (important, because automation respond)
+#			03.09.2013 - UR  003 Releaseversion 1.0
+#			09.10.2013 - COE 004 Changed setting of lib_ge_env(tmp_dir)
+#			10.12.2013 - UR  005 Decomposing the basic functions
+#			10.02.2014 - COE 006 Releaseversion 2.0
+#			17.02.2014 - COE 007 Releaseversion 2.1
+#			13.03.2014 - UR  008 Releaseversion 2.2
+#			31.03.2014 - UR  009 Add lib_flag(PB_decontamination) to switch of PB support
+#			31.03.2014 - UR  010 Releaseversion 2.3
+#			11.04.2014 - UR  011 Releaseversion 2.3.1
+#			12.05.2014 - UR  012 Releaseversion 2.3.2
+#			18.05.2014 - UR  013 Add sourcing with the possibility of nesting folders
+#			19.05.2014 - UR  014 Releaseversion 2.3.3
+#			26.05.2014 - UR  015 Revision of the LIB_Shell_search_path_recursively routines when a blank is included in the path
+#			16.06.2014 - COE 016 Releaseversion 2.3.4
+#			16.06.2014 - UR  017 Add recursively sourcing for the pretreatment files
+#			24.06.2014 - UR  018 Releaseversion 2.3.5
+#			24.06.2014 - UR  019 Releaseversion 2.4
+#			07.07.2014 - UR  020 Releaseversion 2.4.1
+#			16.07.2014 - UR  021 Releaseversion 3.0
+#			29.07.2014 - COE 022 LIB_Shell_environment_handling: lib_ge_env(installed_machines_dir,recursively)
+#					     LIB_Shell_main: no longer call LIB_Shell_search_path_recursively
+#			30.07.2014 - COE 023 Releaseversion 3.1
+#			12.08.2014 - UR  024 Releaseversion 3.1.1
+#			13.08.2014 - UR  025 Adopted revised texts from SPLM
+#			13.08.2014 - UR  026 Releaseversion 3.2
+#			13.08.2014 - UR  027 Releaseversion 3.2.1
+#			15.08.2014 - COE 028 Adopt modifications SPLM
+#			15.08.2014 - COE 029 Releaseversion 3.2.2
+#			25.08.2014 - UR  030 Releaseversion 3.2.3
+#			10.09.2014 - UR  031 Releaseversion 3.2.4
+#			11.09.2014 - UR  032 Releaseversion 3.2.5
+#			22.09.2014 - UR  033 Add property for "show where output comes from" and delete flag(show_where_output_comes_from)
+#			29.09.2014 - COE 034 Releaseversion 3.2.6
+#			13.10.2014 - COE 035 Releaseversion 3.2.7
+#			21.10.2014 - COE 036 Releaseversion 3.2.8
+#			04.11.2014 - COE 037 Releaseversion 3.2.9
+#			11.11.2014 - UR  038 Modification of the complete post speed
+#			13.11.2014 - UR  039 Modification of the complete post speed
+#			21.11.2014 - COE 040 LIB_Shell_environment_handling: changde setting of lib_ge_env(installed_machines_dir,recursively)
+#			28.11.2014 - COE 041 Releaseversion 3.2.10
+#			22.12.2014 - UR  042 Releaseversion 3.3
+#			22.12.2014 - UR  043 Releaseversion 3.3.1
+#			05.01.2015 - UR  044 Releaseversion 3.3.2 and changed the Copyright
+#			06.01.2015 - UR  045 Releaseversion 3.3.3
+#			06.01.2015 - UR  046 Releaseversion 3.3.4
+#			07.01.2015 - UR  047 Releaseversion 3.3.5
+#			11.01.2015 - UR  048 Releaseversion 3.3.6
+#			11.01.2015 - COE 049 Bugfix if the current directory has spaces
+#			13.01.2015 - COE 050 Releaseversion 3.3.7
+#			20.01.2015 - UR  051 Change file nativename and join to LIB_Shell_format_path_names to save runtime
+#			25.01.2015 - UR  052 Releaseversion 3.3.8
+#			28.01.2015 - UR  053 Bugfix at LIB_Shell_environment_handling to defined the base folder
+#			03.02.2015 - UR  054 Correction if the PostConfigurator structure is used
+#			09.02.2015 - UR  055 Releaseversion 3.3.9
+#			02.03.2015 - COE 056 Releaseversion 3.4
+#			12.03.2015 - UR  057 Releaseversion 3.4.1
+#			16.03.2015 - UR  058 Releaseversion 3.4.2
+#			30.03.2015 - UR  059 Releaseversion 3.4.3
+#			20.04.2015 - COE 060 Releaseversion 3.4.4
+#			28.04.2015 - COE 061 Releaseversion 3.4.5
+#			15.06.2015 - UR  062 Releaseversion 3.4.6
+#			15.06.2015 - UR  063 Change abort handling
+#			16.06.2015 - UR  064 Releaseversion 3.4.7
+#			22.06.2015 - UR  065 Releaseversion 3.4.8
+#			21.07.2015 - UR  066 Releaseversion 3.4.9
+#			28.07.2015 - COE 067 Releaseversion 3.4.10
+#			11.08.2015 - COE 068 Releaseversion 3.4.11
+#			16.08.2015 - UR  069 Save Time with Extended foreach Syntax e.g. foreach {a b c d e} [cmdReturningList] {break}
+#						Side note: accelerated runtime after the first index, for one index no improvement
+#					     Comparing if Command exists now with LIB_GE_check_commands to wrote the values to an list once
+#					     Modifications of the memory handling with Procedures K SK D unset! clear and set!, see http://wiki.tcl.tk/1923
+#					     Removing unneeded characters and partially reformat
+#			20.08.2015 - UR  070 Changed misspelling from adress to address (Bug #784)
+#			20.08.2015 - UR  071 Releaseversion 3.4.12
+#			21.08.2015 - UR  072 Releaseversion 3.4.13
+#			24.08.2015 - COE 073 Releaseversion 3.5
+#			04.09.2015 - COE 074 Releaseversion 3.5.1
+#			07.09.2015 - COE 075 Releaseversion 3.5.2
+#			08.09.2015 - COE 076 Releaseversion 3.5.3
+#			13.09.2015 - UR  077 Performance improvement when examining whether a procedure exists and also to loading files
+#			15.09.2015 - UR  078 Releaseversion 3.5.4
+#			17.09.2015 - UR  079 Change the filename for the lib_ge_dll_version to lower case
+#			21.09.2015 - UR  080 Releaseversion 3.6
+#			29.09.2015 - UR  081 Releaseversion 3.6.1
+#			30.09.2015 - UR  082 Releaseversion 3.6.2
+#			05.10.2015 - UR  083 Releaseversion 3.6.3
+#			26.10.2015 - UR  084 Releaseversion 3.6.4
+#			27.10.2015 - UR  085 Releaseversion 3.6.5
+#			18.12.2015 - COE 086 Releaseversion 3.6.6
+#			13.01.2016 - UR  087 Releaseversion 3.6.7
+#			25.02.2016 - UR  088 Releaseversion 3.6.8
+#			07.03.2016 - UR  089 Releaseversion 3.6.9
+#			24.03.2016 - COE 090 Releaseversion 3.6.10
+#			13.04.2016 - UR  091 Releaseversion 3.6.11
+#			20.04.2016 - UR  092 Releaseversion 3.6.12
+#			28.04.2016 - UR  093 Releaseversion 3.7
+#			29.04.2016 - UR  094 Releaseversion 3.7.1
+#			15.05.2016 - COE 095 Releaseversion 3.7.2
+#			15.05.2016 - COE 096 Releaseversion 3.7.3
+#			17.05.2016 - COE 097 Releaseversion 3.7.4
+#			23.05.2016 - COE 098 Releaseversion 3.7.5
+#			27.06.2016 - MAN 099 Update internal documentation
+#			15.08.2016 - UR  100 Releaseversion 4.0
+#			24.08.2016 - UR  101 Releaseversion 4.0.1
+#			04.09.2016 - COE 102 Releaseversion 4.0.2
+#			05.09.2016 - COE 103 LIB_Shell_environment_handling: 'libraries', 'controller' and 'bin'
+#						all lowercase (we check it against the result of 'string tolower')
+#						(back to status of version 100)
+#			05.09.2016 - COE 104 Releaseversion 4.0.3
+#			08.09.2016 - UR  105 Releaseversion 4.0.4
+#			22.09.2016 - UR  106 HISTORY-> Modifications to support now also Linux <-
+#			24.09.2016 - UR  107 Releaseversion 4.0.5
+#			25.09.2016 - UR  108 Releaseversion 4.1
+#			27.09.2016 - UR  109 Releaseversion 4.1.1
+#			04.10.2016 - UR  110 Releaseversion 4.1.2
+#			24.10.2016 - UR  111 Releaseversion 4.1.3
+#			17.11.2016 - MAN 112 Source also from UGII_POST_POOL_DIR_NG_CUSTOM
+#			19.11.2016 - UR  113 Releaseversion 4.1.4
+#			21.11.2016 - MAN 114 Remove again sourcing from UGII_POST_POOL_DIR_NG_CUSTOM
+#			07.12.2016 - UR  115 Releaseversion 4.1.5
+#			11.01.2017 - COE 116 Releaseversion 4.1.6
+#			21.02.2017 - UR  117 Releaseversion 4.1.7
+#			24.02.2017 - UR  118 Releaseversion 4.1.8
+#			13.03.2017 - COE 119 Releaseversion 4.2
+#			05.04.2017 - COE 120 Releaseversion 4.2.1
+#			06.04.2017 - COE 121 Releaseversion 4.2.2
+#			07.04.2017 - COE 122 Releaseversion 4.2.3
+#			24.04.2017 - UR  123 Remove PUI settings and procedures
+#			28.04.2017 - COE 124 Releaseversion 4.2.4
+#			19.05.2017 - UR  125 Releaseversion 4.2.5
+#			18.06.2017 - COE 126 Releaseversion 4.2.6
+#			27.06.2017 - COE 127 Releaseversion 4.2.7
+#			06.07.2017 - UR  128 Extension for the layer editor
+#			31.07.2017 - UR  129 Releaseversion 4.2.8
+#			01.08.2017 - UR  130 Bugfix if variable TEMP not exists within LINUX systems
+#			02.08.2017 - UR  131 Releaseversion 4.2.9
+#			31.08.2017 - UR  132 Add support for *.pcf
+#			01.09.2017 - UR  133 Releaseversion 4.2.10
+#			11.09.2017 - COE 134 Releaseversion 4.2.11
+#			25.09.2017 - COE 135 Releaseversion 4.3
+#			12.11.2017 - COE 136 Releaseversion 4.3.1
+#			28.11.2017 - UR  137 Releaseversion 4.3.2
+#			04.12.2017 - UR  138 Adding the process ID to all files that are traded through the preparation process
+#			21.02.2018 - COE 139 Releaseversion 4.3.3
+#			12.03.2018 - UR  140 File contents revised for TCL8.6 and converted to UTF-8
+#			14.03.2018 - UR  141 Releaseversion 4.4
+#			20.03.2018 - UR  142 Releaseversion 4.4.1
+#			12.04.2018 - UR  143 Releaseversion 4.4.2
+#			04.05.2018 - UR  144 Releaseversion 4.4.3
+#			14.05.2018 - UR  145 Releaseversion 4.4.4
+#			02.07.2018 - UR  146 Releaseversion 4.4.5
+#			20.07.2018 - COE 147 Releaseversion 4.4.6
+#			10.09.2018 - UR  148 Releaseversion 4.4.7
+#			24.09.2018 - UR  149 Releaseversion 4.4.8
+#			08.10.2018 - UR  150 Releaseversion 4.4.9
+#			18.10.2018 - COE 151 Releaseversion 4.5
+#			11.01.2019 - UR  152 Releaseversion 4.6.1
+#			08.02.2019 - UR  153 Releaseversion 4.6.2
+#			16.03.2019 - UR  154 Releaseversion 4.6.3
+#			21.03.2019 - UR  155 Function revision so that the MOM Execute can also be loaded in versions >= 1847
+#			28.03.2019 - COE 156 Releaseversion 4.7
+#			11.04.2019 - UR  157 Releaseversion 4.7.1
+#			18.04.2019 - UR  158 Releaseversion 4.7.2
+#			07.05.2019 - UR  159 Releaseversion 5.0
+#			08.07.2019 - UR  160 Releaseversion 5.0.1
+#			31.07.2019 - UR  161 Releaseversion 5.0.2
+#			16.08.2019 - COE 162 Releaseversion 5.0.3
+#			21.08.2019 - COE 163 Releaseversion 5.1.0
+#			20.09.2019 - COE 164 Releaseversion 5.2.0
+#			06.11.2019 - UR  165 Releaseversion 5.2.3
+#			27.12.2019 - UR  166 Releaseversion 5.2.4
+#			31.01.2020 - COE 167 Releaseversion 5.2.5
+#			02.03.2020 - UR  168 Releaseversion 5.2.6
+#			19.03.2020 - COE 169 Releaseversion 5.2.7
+#			25.03.2020 - COE 170 Releaseversion 5.3.0
+#			23.04.2020 - UR  171 Bugfix set lib_ge_dll_version instead of dotnet_version
+#			01.07.2020 - COE 172 Releaseversion 5.3.1
+#			09.07.2020 - COE 173 Releaseversion 5.3.2
+#			06.09.2020 - COE 174 Releaseversion 5.3.3
+#			15.09.2020 - COE 175 Releaseversion 5.3.4
+#			26.09.2020 - COE 176 Releaseversion 5.3.5
+#			26.11.2020 - COE 177 Releaseversion 5.3.6
+#			24.01.2021 - COE 178 Releaseversion 5.3.7
+#			06.02.2021 - COE 179 Releaseversion 5.3.8
+#			15.03.2021 - COE 180 Releaseversion 5.3.9
+#			13.04.2021 - COE 181 Releaseversion 5.4.0
+#			16.05.2021 - COE 182 Bug#2260: check UGII_TMP_DIR first, use system-env only as fallback
+#			02.06.2021 - COE 183 Releaseversion 5.4.1
+#			11.06.2021 - COE 184 Linux compatibility
+#			21.07.2021 - COE 185 Releaseversion 5.4.2
+#			03.09.2021 - COE 186 Releaseversion 5.4.3
+#			07.09.2021 - COE 187 Releaseversion 5.4.4
+#			29.09.2021 - COE 188 Releaseversion 5.5.0
+#			25.10.2021 - COE 189 Releaseversion 5.5.1
+#			24.11.2021 - COE 190 Releaseversion 5.5.2
+#			19.02.2022 - COE 191 Releaseversion 5.5.3
+#			06.03.2022 - COE 192 Releaseversion 5.5.4
+#			08.04.2022 - COE 193 Releaseversion 5.5.5
+#			13.07.2022 - COE 194 Releaseversion 5.5.6
+#			07.09.2022 - COE 195 Releaseversion 5.5.7
+#			24.09.2022 - COE 196 Releaseversion 5.5.8
+#			15.01.2023 - COE 197 Releaseversion 23.01.0
+#			14.03.2023 - COE 198 Releaseversion 23.03.0
+#			07.04.2023 - COE 199 Releaseversion 23.04.0
+#			14.07.2023 - COE 200 Releaseversion 23.07.0
+#			14.09.2023 - COE 201 Releaseversion 23.09.0
+#			09.10.2023 - ET  202 Releaseversion 23.10.0
+#			10.12.2023 - COE 203 Releaseversion 23.12.0
+#			19.01.2024 - COE 204 Releaseversion 24.01.0
+#			21.03.2024 - COE 205 Releaseversion 24.03.0
+#			13.08.2024 - COE 206 Releaseversion 24.08.0
+#			22.08.2024 - COE 207 Releaseversion 24.08.1
+#			16.09.2024 - COE 208 Releaseversion 24.09.0
+#			24.09.2024 - ET  209 Releaseversion 24.09.1
+#			27.12.2024 - COE 210 Releaseversion 24.12.0
+#			02.04.2025 - COE 211 Releaseversion 25.04.0
+#
+#
+#
+#
+#
+#
+#
+#
+#
+#############################################################################################
+#	Copyright 2014-2024 Siemens Product Lifecycle Management Software Inc.
+#				All Rights Reserved.
+
+#
+####S#T#A#N#D#A#R#D##S#O#U#R#C#I#N#G#########################################################
+
+#____________________________________________________________________________________________
+#
+# Procedure debugger
+#____________________________________________________________________________________________
+#
+
+set lib_ge_debug(on) 0
+set lib_ge_debug(proc_watch_list) "MOM* PPLIB* PROC*"
+set lib_ge_debug(var_write_trace_list) "mom_group_name"
+set lib_ge_debug(proc_watch_exclude_list) "MOM_SMART* MOM_evaluate_arg MOM_before_each_add_var MOM_before_load_address"
+#____________________________________________________________________________________________
+set lib_debug_source_of_proc_list 		""
+set lib_fh_do_after_output			0	;#if set to 0 the posttreatment loop is suppressed
+
+if {![info exists lib_ge_platform]} {
+	set lib_ge_temppath ""
+	if {[info commands MOM_ask_env_var] != ""} {
+		set lib_ge_temppath [MOM_ask_env_var UGII_TMP_DIR]
+	}
+	
+	if {[string match "*windows*" $tcl_platform(platform)]} {
+		set lib_ge_platform 1
+		set lib_ge_slash "\\"
+		if {$lib_ge_temppath == ""} {
+			if {[info exists env(TEMP)]} {
+				set lib_ge_temppath $env(TEMP)
+			} elseif {[info exists env(TMP)]} {
+				set lib_ge_temppath $env(TMP)
+			}
+		}
+	} else {
+		set lib_ge_platform 0
+		set lib_ge_slash "/"
+		if {$lib_ge_temppath == ""} {
+			if {[info exists env(TMPDIR)]} {
+				set lib_ge_temppath $env(TMPDIR)
+			}
+			if {![string length $lib_ge_temppath]} {
+				set lib_ge_temppath "${lib_ge_slash}var${lib_ge_slash}tmp"
+			}
+		}
+	}
+}
+
+#____________________________________________________________________________________________
+# <Internal Documentation>
+#
+# Handling for the default environment variables
+#
+# <Internal Example>
+#
+#____________________________________________________________________________________________
+proc LIB_Shell_environment_handling {} {
+
+ 	global lib_ge_env lib_ge_slash lib_ge_installed_machines
+
+	set lib_ge_env(post_pool_dir) 		[LIB_Shell_format_path_names [MOM_ask_env_var "UGII_POST_POOL_DIR_NG"]]
+	set lib_ge_env(cam_post_dir) 		[LIB_Shell_format_path_names [MOM_ask_env_var "UGII_CAM_POST_DIR"]]
+	set lib_ge_env(tmp_dir)                 [LIB_Shell_format_path_names [MOM_ask_env_var "UGII_TMP_DIR"]]
+	if {$lib_ge_env(tmp_dir) == ""} {set lib_ge_env(tmp_dir) $::lib_ge_temppath}
+
+	if {[string match [string tolower [file tail [file dirname [info script]]]] "libraries"]} {
+		set lib_ge_installed_machines	[file dirname [info script]]
+	} else {
+		set lib_ge_installed_machines	[info script]
+	}
+
+	set lib_ge_env(installed_machines_dir) 	[LIB_Shell_format_path_names [file dirname $lib_ge_installed_machines]]
+	# Needed is searchpath activ, therefore info script is wrong
+	if {[file exists [LIB_Shell_format_path_names "$lib_ge_env(tmp_dir)${lib_ge_slash}pretreatment_script.tcl"]]} {source [LIB_Shell_format_path_names "$lib_ge_env(tmp_dir)${lib_ge_slash}pretreatment_script.tcl"]}
+
+	set lib_ge_env(installed_machines_dir,recursively) ""
+	lappend lib_ge_env(installed_machines_dir,recursively) $lib_ge_env(installed_machines_dir)
+
+	set current_dir [pwd]
+	if {![catch {cd [lindex $lib_ge_env(installed_machines_dir,recursively) 0]}]} {
+		if {![catch {set dir [string tolower [glob *]]}]} {
+			foreach e {libraries controller bin} {
+				set index [lsearch -exact $dir $e]
+				if {$index > -1} {
+					set directory [lindex $dir $index]
+					set directory [string toupper [string index $directory 0]][string range $directory 1 end]
+					lappend lib_ge_env(installed_machines_dir,recursively) [LIB_Shell_format_path_names "[lindex $lib_ge_env(installed_machines_dir,recursively) 0]$lib_ge_slash$directory"]
+				}
+			}
+		}
+	}
+	cd $current_dir
+
+	if {![regexp -nocase -- {\w+} $lib_ge_env(post_pool_dir)]} {set lib_ge_env(post_pool_dir) $lib_ge_env(installed_machines_dir)}
+
+	set lib_ge_env(version_bit)  			[MOM_ask_env_var "UGII_VERSION_BIT"]
+	set lib_ge_env(base_dir)     			[MOM_ask_env_var "UGII_BASE_DIR"]
+
+	set lib_ge_env(compatible_base_release_version)	[MOM_ask_env_var "NX_COMPATIBLE_BASE_RELEASE_VERSION"]
+	set lib_ge_env(major_version)  			[MOM_ask_env_var "UGII_MAJOR_VERSION"]
+	set lib_ge_env(minor_version)     		[MOM_ask_env_var "UGII_MINOR_VERSION"]
+	set lib_ge_env(subminor_version)     		[MOM_ask_env_var "UGII_SUBMINOR_VERSION"]
+
+	if {![info exists lib_ge_dll_version]} {global lib_ge_dll_version}
+	if {$lib_ge_env(minor_version) > 0} {
+		set lib_ge_dll_version "nx$lib_ge_env(major_version)$lib_ge_env(minor_version)"
+	} else {
+		set lib_ge_dll_version "nx$lib_ge_env(major_version)"
+	}
+	if {[llength $lib_ge_env(compatible_base_release_version)] > 0} {set lib_ge_dll_version "nx$lib_ge_env(compatible_base_release_version)"}
+
+	if {[string match "*windows*" $::tcl_platform(platform)]} {
+		regsub -all "/" $lib_ge_env(base_dir) "\\" lib_ge_env(base_dir)
+	}
+
+}
+
+#____________________________________________________________________________________________
+# <Internal Documentation>
+#
+# This procedure may be used to format pathnames from unix format in windows
+# format and delete double backslash
+#
+# Output:
+# D:\Temp\mom\debug.out or \\Server\Temp\mom\debug.out
+#
+# e.g.
+# set error [LIB_Shell_format_path_names "D:/Temp/mom/debug.out"]
+#
+# <Example>
+# set error [LIB_Shell_format_path_names "D:/Temp/mom/debug.out"]
+#____________________________________________________________________________________________
+proc LIB_Shell_format_path_names {pathname} {
+
+	global lib_ge_slash lib_ge lib_ge_platform
+
+	regsub -all "/" $pathname "\\" pathname
+	binary scan $pathname H* pathbin
+	if {[info exists lib_ge(format_path,$pathbin,0,0,0)]} {
+		return $lib_ge(format_path,$pathbin,0,0,0)
+	}
+
+	if {[regexp -nocase -- {^[\\\\]|^[\/\/]} $pathname]} {
+		regsub -all "/" $pathname "\\" pathname
+	}
+
+	if {$lib_ge_platform} {
+		regsub -all "/" $pathname "\\" pathname
+		if {![regexp -nocase -- {^\\\\} $pathname]} {set unc 0} else {set unc 1}
+			 while {[regsub -- "(?q)\\\\" $pathname "\\" pathname]} {}
+		if {$unc} {set pathname "\\$pathname"}
+	} elseif {!$lib_ge_platform} {
+		regsub -all "\\\\" $pathname "/" pathname
+		if {![regexp -nocase -- {^//} $pathname]} {set unc 0} else {set unc 1}
+		while {[regsub -- "(?q)//" $pathname "/" pathname]} {}
+		if {$unc} {set pathname "/$pathname"}
+	}
+
+	set lib_ge(format_path,$pathbin,0,0,0) [string trim $pathname]
+	return $lib_ge(format_path,$pathbin,0,0,0)
+
+}
+
+#____________________________________________________________________________________________
+# <Internal Documentation>
+#
+# Abort postrun
+#
+# <Internal Example>
+#
+#____________________________________________________________________________________________
+proc LIB_Shell_abort {message} {
+
+	MOM_output_to_listing_device $message
+	MOM_log_message $message
+
+	MOM_abort $message
+
+}
+
+#____________________________________________________________________________________________
+# <Internal Documentation>
+#
+# Handling for the main shell
+#
+# <Internal Example>
+#
+#____________________________________________________________________________________________
+proc LIB_Shell_main {} {
+
+	global lib_ge_env lib_ge_slash
+	global lib_cycle_path sourcefile
+
+	LIB_Shell_environment_handling
+
+	lappend ::lib_ge_monitored_files [LIB_Shell_format_path_names [info script]]
+
+	if {[info commands LIB_GE_source] == ""} {
+		set lib_cycle_path 0
+		set searchpath $lib_ge_env(installed_machines_dir,recursively)
+		lappend searchpath $lib_ge_env(post_pool_dir)
+		foreach path $searchpath {
+			if {$lib_cycle_path} {break}
+			foreach ext {.tcl .tbc .pcf} {
+				set sourcefile [LIB_Shell_format_path_names "$path${lib_ge_slash}lib_sourcing$ext"]
+				if {[file exists $sourcefile]} {
+					if {[string match ".tbc" $ext]} {
+						LIB_Shell_abort "ByteCode Loader is not available, cannot process lib_sourcing$ext"
+					}
+					uplevel #0 {
+
+						set err ""
+						if {$tcl_version >= 8.6 && [catch {source -encoding utf-8 $sourcefile} err]} {
+							if {[info exists ::errorInfo]} {MOM_output_to_listing_device "errorInfo $::errorInfo"}
+							LIB_Shell_abort "File lib_sourcing $err not loadable"
+						}
+						if {$tcl_version < 8.6 && [catch {source $sourcefile} err]} {
+							if {[info exists ::errorInfo]} {MOM_output_to_listing_device "errorInfo $::errorInfo"}
+							LIB_Shell_abort "File lib_sourcing $err not loadable"
+						}
+						if {[string length $err] > 0} {
+							set lib_ge_debug(lib_sourcing) "$sourcefile"
+							lappend lib_ge_monitored_files "$sourcefile"
+							lappend lib_ge_log_message "\n--> $sourcefile loaded"
+							set lib_cycle_path 1 ; break
+						}
+
+					}
+				}
+			}
+		}
+		if {!$lib_cycle_path} {
+			LIB_Shell_abort "File lib_sourcing not found"
+		}
+	}
+
+	LIB_Shell_init
+
+}
+
+#____________________________________________________________________________________________
+# <Internal Documentation>
+#
+# Handling for the default environment variables
+#
+# <Internal Example>
+#
+#____________________________________________________________________________________________
+proc LIB_Shell_defined_post_environment {} {
+
+	global lib_ge_env lib_ge_slash lib_pp_source_file
+
+	#____________________________________________________________________________________________
+	#
+	# NX Post, load files
+	#____________________________________________________________________________________________
+	#
+
+	# There are different ways to source each files
+	#
+	# e.g. Befor LIB_GE_source call
+	# lappend lib_pp_source_file "machine,UGII_CAM_POST_DIR"
+	#
+	# e.g. After LIB_GE_source call
+	# LIB_GE_source "Test" "C:/Temp/;d:/tmp/"
+	#
+	# e.g. To define a searchpath
+	# LIB_GE_source "" "C:/Temp/;UGII_CAM_POST_DIR"
+	# Allowed is the direct path and/or variable
+
+	# This is the call the PB post LIB_GE files
+	# ** internal funktion / Don't remove this line **
+
+	if {[file exists "$lib_ge_env(tmp_dir)${lib_ge_slash}pt_source_list_[pid].tcl"]} {
+		LIB_GE_source pt_source_list_[pid] "$lib_ge_env(tmp_dir)${lib_ge_slash}" ".tcl" 0 0 "RUNTIME"
+		LIB_GE_source lib_pretreatment_post
+	} else {
+		lappend lib_pp_source_file "ugpost_base" "lib_msg" "lib_file_handling" "lib_standard_post_func" "lib_document" "lib_pretreatment_post"
+		LIB_GE_source
+	}
+}
+
+LIB_Shell_main
+
+####S#T#A#R#T##C#U#S#T#O#M##M#O#D#I#F#I#C#A#T#I#O#N#S########################################
+
+####E#N#D##C#U#S#T#O#M##M#O#D#I#F#I#C#A#T#I#O#N#S############################################
+
+#############################################################################################
+# This is to debug
+#############################################################################################
+if {[info commands LIB_GE_debug] != ""} {LIB_GE_debug}

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/machine_ootb_turn_sinumerik.tbc

@@ -0,0 +1,83 @@
+if {[catch {package require tbcload 1.6} err] == 1} {
+    return -code error "[info script]: The TclPro ByteCode Loader is not available or does not support the correct version -- $err"
+}
+tbcload::bceval {
+TclPro ByteCode 2 0 1.7 8.4
+2 0 16 5 0 0 16 0 4 2 2 -1 -1
+16
+(<E<!(H&s!/HW<!)9*!!
+2
+,B!
+2
+0-!
+5
+x
+4
+,CHr@
+x
+15
+,W5DFl3%lB*U/CFvhc,
+x
+1
+A!
+p
+4 0 51 14 0 0 16 0 4 4 4 -1 -1
+51
+w0E<!-fSs!)?W<!1#GpvOes<!NSa<!ZZTU#4oXQ#VVNO%6G:3w:_piwQsm<v/H!!
+4
+E0UZ)
+4
+e'&4w
+14
+x
+7
+.=cSAi4Q,
+x
+2
+tyv
+x
+65
+#MfCFs3sp@q3uSAl<c8ArGEw<9w2#,#MfCF68X/Dnl<JD|4sp@q3uSA4PZ-EPiR*1n&=mBl:
+K;@0GY%,+!
+x
+4
+wm<eD
+x
+6
+1lo(F^(%
+x
+20
+u^sY?nR'Z?fIbOBh++Y?:p2TA
+i
+0
+i
+1
+x
+12
+7rXxGt6VgCo0?SA
+x
+17
+H`ZS7jv-H;P3MTA73=JD3v
+x
+3
+ndD-
+x
+8
+kki:@0&6cE
+i
+2
+x
+0
+
+0
+0
+0 1
+20
+u^sY?nR'Z?fIbOBh++Y?:p2TA
+0 0 8
+x
+15
+rpwhC;Z2b3<?<+EfqT+
+0
+0
+}

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/oem_ootb_5ax_sinumerik.cdl

@@ -0,0 +1,75 @@
+
+MACHINE SIEMENS
+
+
+
+
+EVENT high_speed_setting
+{
+   UI_LABEL "Sinumerik 840D"
+   CATEGORY MILL
+   PARAM command_status
+   {
+      TYPE o
+      DEFVAL "Active"
+      OPTIONS "Active","Inactive"
+      UI_LABEL "Status"
+   }
+   PARAM ude_siemens_tolerance_group
+   {
+      TYPE g
+      DEFVAL "start_closed"
+      UI_LABEL "Tolerance"
+   }
+   PARAM siemens_tol
+   {
+      TYPE d
+      DEFVAL "0.01"
+      TOGGLE Off
+      UI_LABEL "User Defined Tolerance"
+   }
+   PARAM ude_siemens_tolerance_group_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+   PARAM ude_siemens_hsm
+   {
+      TYPE g
+      DEFVAL "start_open"
+      UI_LABEL "High Speed Machining"
+   }
+   PARAM siemens_compressor
+   {
+      TYPE o
+      DEFVAL "On"
+      OPTIONS "On","Off"
+      UI_LABEL "Compressor"
+   }
+   PARAM siemens_smoothing
+   {
+      TYPE o
+      DEFVAL "On"
+      OPTIONS "On","Off"
+      UI_LABEL "Smoothing"
+   }
+   PARAM siemens_feedforward
+   {
+      TYPE o
+      DEFVAL "On"
+      OPTIONS "On","Off"
+      UI_LABEL "Feed Forward"
+   }
+   PARAM ude_siemens_hsm_end
+   {
+      TYPE g
+      DEFVAL "end"
+   }
+ 
+ 
+}
+
+
+
+
+

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/oem_ootb_5ax_sinumerik.def

@@ -0,0 +1,10 @@
+MACHINE SIEMENS840D
+
+FORMATTING
+{
+  SEQUENCE sequence_number 10 10 1 99999999
+
+
+}
+
+

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/oem_ootb_5ax_sinumerik.tbc

@@ -0,0 +1,628 @@
+if {[catch {package require tbcload 1.6} err] == 1} {
+    return -code error "[info script]: The TclPro ByteCode Loader is not available or does not support the correct version -- $err"
+}
+tbcload::bceval {
+TclPro ByteCode 2 0 1.7 8.4
+65 0 797 128 0 0 448 0 9 65 65 -1 -1
+797
+w0E<!:B`W!9ytt!*TA9v=|yTv0#>6#4;tl#8DPpv+Ki<!5W&=!<&|=!>rSs!B:3-&FRic&/H
+W<!B8#>!Mqgqv=:JE'?A9X!<yY>!T..rvOes<!`Sa<!mcop#DyT=!bML7-W%2?!O+;?!KfAs
+!N^3-&`D!s*)`6d0P9GB(@JTs!dga|(aj'w)U(:=!cl;9+x.,.'Tp3-&|fb|(/HW<!mlqo+M
+md!vX'4-&pOPN-/HW<!x8#>!jFRrvQDji-|(LK.E_o9vA%2?!^0n@!ZfAs!X'4-&)Odc//HW
+<!X8#>!2'wuvZ@_`0ep%'15B||19Z>?2=rtu27&o9vKa7@!l/CB!8w1B!Ec)!#2fAs!X'4-&
+!|c|(/HW<!X8#>!'AIrvfWPT4q2lo4E_o9vA%2?!O+;?!MfAs!P9GB(jsUs!4fs<!`Sa<!kW
+|p#n0V=!3KC7-r_6C!ue?C!;*8p+Mmd!vTp3-&Wd,07/HW<!p8#>!`yJv#N)nl,&8'-8E_o9
+vo:*D!cG<D!l+,##snAH8Dau&:m>X|:0KW<!?tR@!qq&E!'mJs!T+ST4pA=B:(d7Uvo:*D!_
+(9E!r+,##snAH8w2QW<pGX|:0KW<!n:TE!!r&E!*mJs!&6of%!f9?;%x7Uvo:*D!'5KE!r+,
+##snAH8(>QW<m,y`90KW<!qLoE!!r&E!'mJs!r:.6>!f9?;%x7Uvo:*D!e4KE!u=G##snAH8
+tFIQ>m,y`90KW<!aA3D!(r&E!*mJs!Hia`0)):?;%x7Uvo:*D!8qPF!r+,##snAH89^'0@pG
+X|:0KW<!<b7@!-r&E!'mJs!<Rpl,.8:?;(d7Uvo:*D!35KE!u=G##snAH8N_<HAm,y`90KW<
+!2&2?!1r&E!*mJs!)Rt)B!f9?;%x7Uv9KDG!LXVG!PdhG!Tp%H!|Tj&#J.-<E^:grEbRHTF0
+KW<!27LB!n(U'#SWTfIfuVQ,O)s9vJy4I!niFI!vN6(#TWTfIn8WQ,U;s9vz
+65
+38PpvUIxOwO-KQw|^%n#M=xOwNU&I&JCxOwTH6<*Q=xOwUaN1%UaN1%UaN1%UaN1%UaN1%Ua
+N1%YCxOw.!
+65
+B4Eg%MnC7#L,@4wChpNwM=xOwdfP+'L=xOwj0&4wOO<1%UaN1%UaN1%UaN1%UaN1%UaN1%|T
+(b'QO<1%+!
+128
+x
+25
+u^sY?nR'Z?<OFY?-lo(Fpr<JDf!?r@>v
+x
+5
+5+GJ0R!
+x
+25
+u^sY?nR'Z?=OFY?-lo(Fpr<JDf!?r@>v
+x
+19
+u^sY?nR'Z?@5--E56K^FmpD-
+x
+4
+YvQ)<
+x
+33
+X=@U?pY_p@vkT;@`YEU@sO,SAg+|7A&pNaE/5M&G1v
+x
+30
+X=@U?jjdU?0g_5Bl4sY?_%97Af7ap@&:lSAY+%
+x
+14
+47Xp6x_NX6PK687nt#
+x
+11
+<Kc87@'(q6qWM*
+x
+5
+;o`'<f!
+x
+9
+E,+F;RNMg9f!
+x
+32
+X=@U?jjdU?.30bE%<XeDgF>SAic/bEkoW/D,ZbDF
+x
+9
+Lk,%=JE?87R!
+x
+9
+?NZS7T,y.:f!
+x
+9
+Lk,%=JE?87S!
+x
+12
+H`ZS7j#mS7so.6B
+x
+3
+ndD-
+x
+28
+@5--E/URdDup,<@26sJDhlJ(F&?s+E26sJD
+x
+3
+|ho+
+x
+22
+@5--E/URdDup,<@26sJD(&lDFO(%
+x
+6
+q'-W@Dhw
+x
+20
+u^sY?nR'Z?fIbOBh++Y?:p2TA
+x
+4
+wm<eD
+x
+6
+1lo(F^(%
+i
+0
+i
+1
+x
+11
+8rXxGu?q-DcIQ,
+x
+17
+H`ZS7jv-H;P3MTA73=JD3v
+x
+22
+#@IIDuV1`FEPMEF/56-E=;2EF@Pw
+x
+4
+RW?87
+x
+20
+rA|fD2'WTA/MMEF0F^Z?r^oRA
+x
+3
+P'-)
+x
+12
+7rXxGt6VgCo0?SA
+x
+18
+H`ZS7kQMs@^r8H1:i&fD@Sw
+x
+13
+#a%hCwnC,1l<c8A1v
+x
+6
+82_`FWnw
+x
+0
+
+x
+15
+H`ZS7jv-H;Ti&fDp^;-
+x
+18
+82_`Fw1q-Ddb*Y?@5--E`+%
+x
+16
+qd,<@(W1`FEPMEF'L>nA
+x
+11
+H`ZS7lIxU?i@w,
+x
+19
+0ot)FYk*Y?4sRQBu2jFErjZ,
+x
+26
++sEiCU_*Y?#VBq@b.jY?kW`aEjEVTAy(%
+x
+11
+_%97AqE7IDUvg+
+x
+6
+%30fDNSw
+x
+11
+82_`Fw1q-DZyf+
+x
+4
+1@p;@
+x
+35
+82_`FnvFU@wQ5cE`^CkB0@^Z?66=iCX.';@fk*Y?t'<-
+x
+33
+%_omA1P,D+*+dfDj%ap@k-V5Bh-DTAAl9KDp)X/D1v
+x
+14
+H`ZS7jv-H;x>ffDRhw
+x
+20
+1,gfDX.';@fk*Y?.0B,Es?VTA
+x
+4
+4/;EF
+x
+16
+66=iCX.';@fk*Y?njkSA
+x
+10
+sF=Y?&gRQBJPw
+x
+7
+%_omAf.p+
+x
+25
+66=iCX.';@fk*Y?82_`FtX>OBm(+Y?&v
+x
+23
+66=iCX.';@fk*Y?82_`FtX>OBcvg+
+x
+22
+82_`F+p/CF!YjY?g3IIDh0m*EY(%
+x
+25
+V`w<6!BK(FvpNaE.'aaE3?ffD(Q0bE;v
+x
+30
+l@,SA1Rq-D3<XeDa%omAv_KZ?66=iCg3IIDCSw
+x
+24
+h?!eD7#Q)F`^CkB0@^Z?/!iTAu&v/D
+x
+13
+H`ZS7j#mS7gKxhC1v
+x
+19
+hIa:@he`p@mFYjBi7|mAytf+
+x
+21
+kg#lB`-!eD;rTfD''0bE4PZ-E1v
+x
+13
+a+HD<Ou%Q8i4>/:f!
+x
+21
+H`ZS7@ESc1XV_p@;2ccEw1cSA>v
+x
+25
+7o(`F%dxlBi-!eD;rTfDsEhTA59XeD:v
+x
+9
+h&rTA-p<JD1v
+x
+18
+&FR.Dr*UZ?'NB,E5ot)FX%%
+x
+3
+RFK(
+x
+18
+@5--E56K^Fvv^Z?#eYjBN_w
+i
+4
+x
+36
+.XIIDh*)9Aq,BCFxv|RA-(wSA&3TfD8>d#H'#lDF1oG)F
+x
+31
+X=@U?P8NX6dddU?#k|Z?9cT,E<(vwHSq/q@m3<-
+x
+19
+H`ZS7@ESc1XV_p@%kbSAd)-&
+x
+17
+#@IIDuV1`FEPMEFyI#SA0v
+x
+14
+Ao.Q8_qVp6Jp|V6UD#
+x
+4
+<^977
+x
+83
+0ot)FYk*Y?u9p;@EPiSA&k54BhWA(F|1J>+0ot)FYk*Y?u9p;@FPiSA&k54BhWA(F^7S>+0o
+t)FYk*Y?u9p;@GPiSA&k54BhWA(F?qJ&
+x
+8
+>Bpu5<I'q6
+x
+8
+>7Xp6dRMy=
+x
+151
+w3F/Ds0^Z?+sEiCU_*Y?kW`aEjEVTA1QiSA&k54BhWA(FD;I>+0ot)FYk*Y?9qm>HEPiSA&k
+54BhWA(FEAR>+0ot)FYk*Y?9qm>HFPiSA&k54BhWA(FFGx>+0ot)FYk*Y?9qm>HGPiSA&k54
+B&,7BGu-cOB4&O+Eb.fRAt|2TAfwhgCX.';@vaSCFl0<-
+x
+5
+Ao.Q8d!
+x
+15
+r!-x?u3uSAkWmIDeI-,
+x
+55
+r!-x?u3uSAkWmID0k>D+hIa:@he`p@mFYjBi7|mA'A#D+b7a:@*.:Z?>A;EF/MMEF&@E-
+x
+16
+H`ZS7lIxU?o-V5BoF5SA
+x
+3
+xIQ,
+x
+13
+H`ZS7lIxU?`=Bq@7v
+x
+18
+H`ZS7j#mS7imK;@jX:LCNnw
+x
+20
+H`ZS7j#mS7&Jm#H6S@2A,2lDF
+x
+16
+H`ZS7j#mS7u&v/Dnl<JD
+x
+16
+H`ZS7j#mS7|4sp@q3uSA
+x
+118
+#@IIDuV1`FEPMEF'#lDFrd'Z?4sRQBlW7lB=MCiC`++Y?@5--E-Cq-D3<XeD%p3mB%LNaE)N
+fCF7vMEFs3MTAt'qkB7MCiC`++Y?@5--E&Y|mAp%oC+.F?<@gyEU@wQ5cE3tQfD&@VTAgrnC
+FN%%
+x
+13
+8+B@+H92B+aN-r6f!
+x
+189
+)W(`Fy%ap@k-V5Bj9VTAvnK;@3D3'DrHH<@%B>cE!x7hChd|Z?.0B,Es?VTA)BIIDn.jY?2B
+K(FfIBq@m:K;@2-0CF&6FiC'Y#D+1,gfDX.';@fk*Y?.0B,Es?VTA7vMEF(B>cE!x7hChd|Z
+?.0B,Es?VTA7vMEF(B>cE!x7hChd|Z?,l:EFrfR.D)!BCF5+dfDvFm*E'FMTAulSCF9(MEFk
+^sY?%,_`FkWNaEpAP_F?v
+x
+17
+H`ZS7jv-H;xA#-EtE.hC1v
+x
+55
+u-V5B5.!-EtE.hCuV1`FEPMEFhireD3%,!F#+Z8Ajjp-Dv'OaE#@RdDFG;`FmxggCd%g+
+x
+22
+'ji'F#+Z8AoBNaEjk*:@6;hAG@Pw
+x
+304
+h?!eD7#Q)F`^CkB0@^Z?/!iTAsP5cEUqrp@v?ffDvFm*E*k>D+h?!eD7#Q)F`^CkB0@^Z?/!
+iTAn0Bq@3QBfDj+|mA:J;EF)5M&Gp&BfD)plRA'NB,Es:+Y?,uk)F'j&fD%Li'F54fZEk!-8
+ArfR.D)!BCF'ovlBsN`aErfR.D)!BCFs8&kB.6siCs&0CF&6FiC'Y#D+wLIlBq2TfD8>d#H+
+N%QBm(+Y?.0B,Es?VTA5Q?<@rK`aEaRo;@jeEU@-6rTAq|NaE.'aaE,j&fD26sJD?h?fDkRK
+Z?49BCF2!j'F3f1EF`44Y?0g_5B88=iCnNRdD|%BRAmwRdDcRo;@9h/wE&d`aEyI#SA#3BCF
+1h?fDkRKZ?-RIID5T5DF
+x
+250
+l@,SA6*OaEwI-<@e4FU@wQ5cEf?<eD;9SQBn&=mB4Q3<@0V!wHvKfCFvaSCFYF>nAr7+Y?!6
+oCFmrXxG<O,!Fm&fCF'.DTAvDsp@gv|RAw^DTA!l1`F%PFY?-lo(Fpr<JD0|90DoKhgC:%,!
+Fm&fCF'.DTAvDsp@gv|RAw^DTAajbnAiy*:@+qTZ?%X7lB&qsY?0Kk_F)oATAAl9KDl<c8A)
+oATAAl9KDYF>nAr7+Y?,uk)F.?ffDj%ap@k-V5Bp&BfD7oATAAl9KD)`9fDcCbOBhm5SA)#Q
+)F8JfCF,n'Z?l@,SA4mm*EY(%
+x
+16
+H`ZS7jv-H;Y;5cEt`<JD
+x
+107
+kki:@0&6cE*mK;@n'RdDFG;`F3oU`F9o5cE*&oC+rA|fD2'WTAi!?nAtr@lBCxG<F0amdDl<
+c8A*Pl^F+pW/DgsGnAhireD/Vi|Ds-DTA2BK(FuB?<@26sJD0AccE9,_`F|Y|+
+x
+93
+#@IIDuV1`FEPMEF4u<+E(W1`FEPMEF/56-E=;2EF*+G<FlasY?r^oRA4u<+E(W1`FEPMEF#Q
+/(F<DMEFuV1`FEPMEFl<c8AjBUU@;uk_Ft'RdDFG;`F@v
+x
+15
+H`ZS7jv-H;GgwhC`du,
+x
+35
+X=@U?pY_p@vkT;@`YEU@sO,SAg+|7A&pNaEaL>nA^%g+
+x
+22
+j<OV?c%vY?q3m*E2<BbEFXDO9W>#
+x
+14
+XXRU?fxZg:yMaF;Z_#
+x
+23
+j<OV?@5--E,:VgC,?0bE1|:s+r*Xw
+x
+7
+V`w<6ZA.&
+x
+23
+j<OV?@5--E,:VgC,?0bE1|:s+q<Xw
+x
+7
+V`w<6YPd&
+x
+24
+j<OV?@5--E,:VgC,?0bE1|:s+Iftt+
+x
+8
+V`w<61FcJ0
+x
+33
+X=@U?pY_p@vkT;@`YEU@sO,SAg+|7Aj++:@+dmID0v
+x
+28
+X=@U?XW^u5J'i'F/TsiCuptSA.@UZ?,W5DF
+x
+38
+X=@U?XW^u5J'i'F/TsiCuptSA.@UZ?,W5DFhk,)<<SARAIPw
+x
+24
+bsNV?V`w<6/MMEF0F^Z?4QTbE)NfCF
+x
+13
+V`w<6!-ylB'FMTA@v
+x
+4
+,CHr@
+p
+1 0 7 2 0 0 4 0 2 1 1 -1 -1
+7
+w0E<!)'!!
+1
+z
+1
+'!
+2
+x
+29
+X=@U?jjdU?'FMTA'j&fD26sJD-?ffD(Q0bE;v
+x
+3
+v.E-
+0
+0
+0 0
+p
+20 0 221 25 0 0 100 0 4 20 28 -1 -1
+221
+w0E<!(H&s!/HW<!,r=pv,|yTv-|A9vT9asvO'n<vTSO3-N_-4w?bcsvO'n<vRAnQ,>e64wfa
+@4.H!!!!vqJ=!6HN<!0cbsvO'n<vTSO3-=,f=!9HN<!V;kU,Q,Sp+2#,:vb1NH&%P<)!ues<
+!OSa<!_)lmwH^/*'>7JE'CVRa:1&>6#G_bY!.|/=!MdyE'1oA=!5ro7-Pnl0%<2Bs!2/YQ#H
+h(u!7Yw4w^M/p+?n:u!REb|(-BW<!=nl0%=59s!32YQ#Ge(u!^O+'(^O+'(z
+20
+3l`!!PD9v!h9akwAPt6#EhUm#
+28
+393<!I,*g#+33<!i;#+#<SLm#yXVm#?_LR#
+25
+x
+6
+q'-W@Dhw
+x
+17
+u^sY?/F^Z?oWIhCp&BfD?v
+x
+12
+u^sY?,W5DF)#Q)F
+x
+24
+c_dX?!koZ?nR'Z?fIbOBh++Y?:p2TA
+x
+18
+u^sY?4;QcEs0^Z?19nlBTnw
+x
+4
+wm<eD
+x
+6
+1lo(F^(%
+i
+0
+i
+1
+x
+12
+,W5DFb.jY?/!iTA
+x
+10
+,uk)F'j&fDRSw
+x
+21
+H`ZS7@ESc1XV_p@;2ccEw1cSA>v
+x
+17
+7o(`F%dxlBrEhTA59XeD:v
+x
+2
+Yrv
+x
+17
+H`ZS7jv-H;P3MTA73=JD3v
+x
+11
+,!a/D/MMEF&@E-
+x
+6
+*mSCFX%%
+x
+7
+:rXxG(&N%
+x
+24
+X=@U?jjdU?lj|Z?3KfCFwaACF,ZbDF
+x
+9
+-lo(Fl<c8A1v
+x
+12
+`%?D<Qih-:^UQc;
+x
+17
+:rXxGlC'7An.jY?pgpgC1v
+x
+0
+
+x
+18
+X=@U?jjdU?iN!iC|4sp@Xqw
+x
+8
+^bsF;S_0(<
+0
+0
+0 5
+18
+u^sY?4;QcEs0^Z?19nlBTnw
+0 0 8
+24
+c_dX?!koZ?nR'Z?fIbOBh++Y?:p2TA
+1 0 8
+21
+4;QcEs0^Z?/F^Z?oWIhCp&BfD?v
+2 0 10
+17
+u^sY?/F^Z?oWIhCp&BfD?v
+3 0 8
+1
+-v
+4 0 9
+x
+34
+X=@U?pY_p@vkT;@`YEU@sO,SAg+|7Aw^m*Ew42TAIPw
+x
+24
+j<OV?2'aaEuwDoA(fTfDtH..DXjj:6
+x
+36
+j<OV?2'aaEuwDoA(fTfDtH..DXjj:6hk,)<J'i'F3f1EF
+x
+26
+bsNV?V`w<6!BK(FvpNaE8JlcE!j&fD@Sw
+x
+12
+ly0(<!LXV?Gp977
+p
+29 0 215 21 2 0 148 1 8 29 33 -1 -1
+215
+w0E<!,?`W!uAv!!7%-s!'KA9vvS<)!M:*?!(Ki<!-Qr<!2|/=!,r=pv3,>pvLSa<!85:3w:_
+piw7)9X!:>o9vWf.p+xuS=!5&|=!>uS=!@DC3w,H<<!B2Gpv35:3w:_piw7)9X!:>o9v?8L3
+weNa(1!F&m#0iA=!:uS=!7HN<!N:iH&s/Y0/4#|Tv?+mf%<k60%4lA=!@+/*'6#o9v0iA=!:
+uS=!7HN<!N:iH&0oA=!4rfV,t:ep+6-<<!+HN<!9otsvQ-n<v+<!!
+29
+/uJv!:GPpvAYQ0%<.WH&<bG#!:5,pv8#99v9!
+33
+!w!!!0,H7wQCDqv'Xj?2`x`-&Tm8M%0>d/&K1Dqv'!
+21
+x
+15
+H`ZS7jv-H;Ti&fDp^;-
+x
+11
+82_`Fw1q-DZyf+
+x
+5
+0Kk_F1v
+x
+25
+I_9fDcCbOBhm5SAvKfCF,n'Z?!@lSAK!
+x
+35
+82_`FnvFU@wQ5cE`^CkB0@^Z?66=iCX.';@fk*Y?t'<-
+x
+3
+ndD-
+x
+6
+:<ylBLYw
+x
+3
+`@u,
+x
+52
+A_9fDcCbOBhm5SAvKfCF,n'Z?!@lSAMVuZE8JlcE!j&fDv1m*EnH..D<(QQBU'u%,
+x
+0
+
+x
+7
+rLa:@_k,,
+x
+6
+8?c<@N+%
+x
+14
+H`ZS7jv-H;x>ffDRhw
+x
+20
+1,gfDX.';@fk*Y?.0B,Es?VTA
+x
+23
+66=iCX.';@fk*Y?82_`FtX>OBcvg+
+x
+8
++'O+Eb.fRA
+x
+24
+82_`Fw1q-D!D+Y?qd,<@A?R>FF+QQB
+i
+0
+x
+25
+66=iCX.';@fk*Y?82_`FtX>OBm(+Y?&v
+x
+19
+82_`Fw1q-D!D+Y?qd,<@H`W*
+x
+4
+1@p;@
+2
+L 1 73 41 122 115 -1
+L 1 144 41 193 186 -1
+0
+0 2
+7
+mxoRA*i7&
+0 0 9
+7
+mxoRA+o@&
+1 0 9
+x
+15
+rpwhC;Z2b3<?<+EfqT+
+0
+0
+}

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/sim12_turn_2ax_sinumerik.cdl

@@ -0,0 +1,44 @@
+MACHINE Default
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/sim12_turn_2ax_sinumerik.def

@@ -0,0 +1,57 @@
+MACHINE Default
+
+INCLUDE {
+$POST_LIB_CURRENT_MACH_DIR/Controller/ctrl_s840d_base.def
+$POST_LIB_CURRENT_MACH_DIR/Controller/ctrl_sinumerik_base.cdl
+$POST_LIB_CURRENT_MACH_DIR/Controller/ctrl_sinumerik_base.def
+$POST_LIB_CURRENT_MACH_DIR/Controller/ctrl_s840d_base.cdl
+$POST_LIB_CURRENT_MACH_DIR/Controller/ctrl_s840d_base_cycle$POST_SYS_CYCL_VERS.cdl
+$POST_LIB_CURRENT_MACH_DIR/oem_ootb_5ax_sinumerik.def
+$POST_LIB_CURRENT_MACH_DIR/oem_ootb_5ax_sinumerik.cdl
+$POST_LIB_CURRENT_MACH_DIR/sim12_turn_2ax_sinumerik.cdl
+$POST_LIB_CURRENT_MACH_DIR/sim12_turn_2ax_sinumerik_service.def
+
+}
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/sim12_turn_2ax_sinumerik.psc

@@ -0,0 +1,214 @@
+<?xml version="1.0" encoding="UTF-8"?>
+
+<Configuration>
+  <Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+  <Version>2.0</Version>
+  <MachineName>sim12_turn_2ax_sinumerik</MachineName>
+  <Sourcing>
+    <Sequence>
+		<Layer Name="Libraries" ReadOnly="true" SubFolder="Libraries">
+			<Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+			<Template>${UGII_CAM_RESOURCE_DIR}post_configurator/post_template/libraries/libraries.psl</Template>
+			<Version>1.00</Version>
+			<Order>1001</Order>
+			<Scripts>
+				<Filename Name="lib_sourcing" Processing="auto"/>
+				<Filename Name="lib_general" Processing="auto"/>
+				<Filename Name="lib_xml_handling" Processing="auto"/>
+				<Filename Name="lib_msg" Processing="true"/>
+				<Filename Name="lib_file_handling" Processing="true"/>
+				<Filename Name="lib_standard_post_func" Processing="true"/>
+				<Filename Name="lib_document" Processing="true"/>
+				<Filename Include="pretreatment" Name="lib_pretreatment" Processing="auto"/>
+				<Filename Include="pretreatment" Name="lib_pretreatment_post" Processing="auto"/>
+			</Scripts>
+			<DefinedEvents>
+				<Filename Include="pretreatment" Name="lib_pretreatment" Processing="auto"/>
+			</DefinedEvents>
+			<CustomerDialogs>
+			</CustomerDialogs>
+			<Functions>
+			</Functions>
+			<Comments>
+			  <Comment>
+				  <User>Siemens Product Lifecycle Management Software Inc.</User>
+				  <Date>01.01.2019 12:00:00</Date>
+				  <Text>Initial generated by Post Configurator</Text>
+			  </Comment>
+			</Comments>
+		</Layer>
+    	<Layer Name="Sinumerik 840D" ReadOnly="true" SubFolder="Controller">
+			<Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+			<Template>${UGII_CAM_RESOURCE_DIR}post_configurator/post_template/controller/sinumerik/base/ctrl_s840d_base.psl</Template>
+			<Version>1.00</Version>
+			<Order>2001</Order>
+			<Scripts>
+				<Filename Name="ctrl_sinumerik_base" Processing="true"/>
+				<Filename Name="ctrl_s840d_base" Processing="true"/>
+				<Filename Name="ctrl_sinumerik_base_msg" Processing="true"/>
+			</Scripts>
+			<DefinedEvents>
+				<Filename Include="true" Name="ctrl_sinumerik_base" Processing="auto"/>
+				<Filename Include="true" Name="ctrl_s840d_base" Processing="auto"/>
+			</DefinedEvents>
+			<CustomerDialogs>
+				<Filename Include="true" Name="ctrl_sinumerik_base" Processing="auto"/>
+				<Filename Include="true" Name="ctrl_s840d_base" Processing="auto"/>
+				<Filename Include="true" Name="ctrl_s840d_base_cycle" Processing="auto"/>
+			</CustomerDialogs>
+			<Functions>
+			</Functions>
+			<Comments>
+			  <Comment>
+				  <User>Siemens Product Lifecycle Management Software Inc.</User>
+				  <Date>01.01.2019 12:00:00</Date>
+				  <Text>Initial generated by Post Configurator</Text>
+			  </Comment>
+			</Comments>
+		</Layer>
+		<Layer Name="Machine Tool Builder" ReadOnly="false">
+			<Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+			<Version>1.00</Version>
+			<Order>3001</Order>
+			<Scripts>
+				<Filename Name="sim12_turn_2ax_sinumerik_mtb" Processing="true"/>
+			</Scripts>
+			<DefinedEvents>
+			</DefinedEvents>
+			<CustomerDialogs>
+			</CustomerDialogs>
+			<Functions>
+			</Functions>
+			<Comments>
+			  <Comment>
+				  <User>Siemens Product Lifecycle Management Software Inc.</User>
+				  <Date>01.01.2019 12:00:00</Date>
+				  <Text>Initial generated by Post Configurator</Text>
+			  </Comment>
+			</Comments>
+		</Layer>
+		<Layer Name="Sinumerik OOTB" ReadOnly="false">
+			<Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+			<Template>${UGII_CAM_RESOURCE_DIR}post_configurator/post_template/controller/sinumerik/manufacturer/oem_ootb_5ax_sinumerik.psl</Template>
+			<Version>1.00</Version>
+			<Order>4001</Order>
+			<Scripts>
+				<Filename Name="oem_ootb_5ax_sinumerik" Processing="true"/>
+			</Scripts>
+			<DefinedEvents>
+				<Filename Name="oem_ootb_5ax_sinumerik" Processing="true"/>
+			</DefinedEvents>
+			<CustomerDialogs>
+				<Filename Name="oem_ootb_5ax_sinumerik" Processing="true"/>
+			</CustomerDialogs>
+			<Functions>
+			</Functions>
+			<Comments>
+			  <Comment>
+				  <User>Siemens Product Lifecycle Management Software Inc.</User>
+				  <Date>01.01.2019 12:00:00</Date>
+				  <Text>Initial generated by Post Configurator</Text>
+			  </Comment>
+			</Comments>
+		</Layer>
+		<Layer Name="Sinumerik Sample Turning Machine" ReadOnly="false">
+			<Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+			<Template>${UGII_CAM_RESOURCE_DIR}post_configurator/post_template/controller/sinumerik/machine/machine_ootb_turn_sinumerik.psl</Template>
+			<Version>1.00</Version>
+			<Order>5001</Order>
+			<Scripts>
+				<Filename Name="machine_ootb_turn_sinumerik" Processing="true"/>
+			</Scripts>
+			<DefinedEvents>
+			</DefinedEvents>
+			<CustomerDialogs>
+			</CustomerDialogs>
+			<Functions>
+			</Functions>
+			<Comments>
+			  <Comment>
+				  <User>Siemens Product Lifecycle Management Software Inc.</User>
+				  <Date>01.01.2019 12:00:00</Date>
+				  <Text>Initial generated by Post Configurator</Text>
+			  </Comment>
+			</Comments>
+		</Layer>
+		<Layer Name="Service" ReadOnly="false">
+			<Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+			<Version>1.00</Version>
+			<Order>8001</Order>
+			<Scripts>
+				<Filename Name="sim12_turn_2ax_sinumerik_service_s840d" Processing="true"/>
+			</Scripts>
+			<DefinedEvents>
+				<Filename Name="sim12_turn_2ax_sinumerik_service" Processing="true"/>
+			</DefinedEvents>
+			<CustomerDialogs>
+			</CustomerDialogs>
+			<Functions>
+			</Functions>
+			<Comments>
+			  <Comment>
+				  <User>Siemens Product Lifecycle Management Software Inc.</User>
+				  <Date>01.01.2019 12:00:00</Date>
+				  <Text>Initial generated by Post Configurator</Text>
+			  </Comment>
+			</Comments>
+		</Layer>
+		<Layer Name="Customer" ReadOnly="true">
+			<Copyright>Siemens Product Lifecycle Management Software Inc.</Copyright>
+			<Version>1.00</Version>
+			<Order>9001</Order>
+			<Scripts>
+				<Filename Name="sim12_turn_2ax_sinumerik_custom" Processing="true"/>
+			</Scripts>
+			<DefinedEvents>
+			</DefinedEvents>
+			<CustomerDialogs>
+			</CustomerDialogs>
+			<Functions>
+			</Functions>
+			<Comments>
+			  <Comment>
+				  <User>Siemens Product Lifecycle Management Software Inc.</User>
+				  <Date>01.01.2019 12:00:00</Date>
+				  <Text>Initial generated by Post Configurator</Text>
+			  </Comment>
+			</Comments>
+		</Layer>
+	</Sequence>
+  </Sourcing>
+  <History>
+	<Comments>
+		<Comment>
+		  <User>lili</User>
+		  <Date>17.09.2019 17:36:37</Date>
+		  <Text>Initial generated by Post Configurator</Text>
+		</Comment>
+		<Comment>
+		  <User>lili</User>
+		  <Date>17.09.2019 17:36:37</Date>
+		  <Text>'Postprocessor successfully upgraded from version 4.7.1 to version 5.1.0</Text>
+		</Comment>
+		<Comment>
+		  <User>lili</User>
+		  <Date>25.09.2019 21:50:55</Date>
+		  <Text>'Postprocessor successfully upgraded from version 5.1.0 - Release to version 5.2.0</Text>
+		</Comment>
+		<Comment>
+		  <User>lili</User>
+		  <Date>30.03.2020 12:01:41</Date>
+		  <Text>'Postprocessor successfully upgraded from version 5.2.0 - Release to version 5.3.0</Text>
+		</Comment>
+	</Comments>
+    <Customer>
+      <Company/>
+      <Address/>
+      <Contact/>
+      <Phone/>
+      <Fax/>
+      <Mail/>
+    </Customer>
+  </History>
+<Units>Millimeters and Inches</Units>
+</Configuration>

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/sim12_turn_2ax_sinumerik.pui

@@ -0,0 +1 @@
+# this file is intentionally left empty

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/sim12_turn_2ax_sinumerik.tcl

@@ -0,0 +1,322 @@
+set pc_initial_library_release_of_post 50505
+#############################################################################################
+#
+#	Customer Data
+#
+#	Company         :
+#	Address         :
+#	Contact person  :
+#	Phone           :
+#	Fax             :
+#	Mail            :
+#
+#############################################################################################
+#
+#	Copyright 2014-2022 Siemens Product Lifecycle Management Software Inc.
+#				All Rights Reserved.
+#	Copyright (c) 2012-2020 Siemens Industry Software GmbH & Co. KG
+#
+#	Die Quellcodes der Programme sind urheberrechtlich geschuetzt und
+#	duerfen ohne Zustimmung von Siemens Industry Software GmbH & Co. KG weder kopiert noch
+#	fuer andere Zwecke weiterverwendet werden.
+#
+#	The source of the programs is protected by Copyright.
+#	You are not allowed to make any copies or modifications
+#	without consent of Siemens Industry Software GmbH & Co. KG.
+#
+#	Le contenu de ces programmes sont protégés par copyright et ne
+#	peuvent pas être copiés ou réutilisés sans l'agrément de Siemens Industry Software GmbH & Co. KG
+#
+#############################################################################################
+#____________________________________________________________________________________________
+#
+# Procedure debugger
+#____________________________________________________________________________________________
+#
+
+set lib_ge_debug(on) 0
+set lib_ge_debug(proc_watch_list) "MOM* PPLIB* PROC*"
+set lib_ge_debug(var_write_trace_list) "mom_group_name"
+set lib_ge_debug(proc_watch_exclude_list) "MOM_SMART* MOM_evaluate_arg MOM_before_each_add_var MOM_before_load_address"
+#____________________________________________________________________________________________
+set lib_debug_source_of_proc_list 		""
+
+if {![info exists lib_ge_platform]} {
+	set lib_ge_temppath ""
+	if {[info commands MOM_ask_env_var] != ""} {
+		set lib_ge_temppath [MOM_ask_env_var UGII_TMP_DIR]
+	}
+	
+	if {[string match "*windows*" $tcl_platform(platform)]} {
+		set lib_ge_platform 1
+		set lib_ge_slash "\\"
+		if {$lib_ge_temppath == ""} {
+			if {[info exists env(TEMP)]} {
+				set lib_ge_temppath $env(TEMP)
+			} elseif {[info exists env(TMP)]} {
+				set lib_ge_temppath $env(TMP)
+			}
+		}
+	} else {
+		set lib_ge_platform 0
+		set lib_ge_slash "/"
+		if {$lib_ge_temppath == ""} {
+			if {[info exists env(TMPDIR)]} {
+				set lib_ge_temppath $env(TMPDIR)
+			}
+			if {![string length $lib_ge_temppath]} {
+				set lib_ge_temppath "${lib_ge_slash}var${lib_ge_slash}tmp"
+			}
+		}
+	}
+}
+if {![info exists lib_ge_env(tmp_dir)]} {
+	set lib_ge_env(tmp_dir)		[MOM_ask_env_var "UGII_TMP_DIR"]
+}
+if {![string length $lib_ge_env(tmp_dir)]} {
+	set lib_ge_env(tmp_dir) $lib_ge_temppath
+}
+
+#____________________________________________________________________________________________
+# <Documentation>
+#
+# Handling for the default environment variables
+#
+# <Example>
+#
+#____________________________________________________________________________________________
+proc LIB_Shell_environment_handling {} {
+
+	eval global [uplevel #0 info vars]
+
+	# Language file and OS specific values
+	if {![info exists lib_ge_slash]} {global lib_ge_slash}
+	if {![info exists lib_ge_env]} {global lib_ge_env}
+
+	set lib_ge_env(post_pool_dir) 		[LIB_Shell_format_path_names [MOM_ask_env_var "UGII_POST_POOL_DIR_NG"]]
+	set lib_ge_env(cam_post_dir) 		[LIB_Shell_format_path_names [MOM_ask_env_var "UGII_CAM_POST_DIR"]]
+	set lib_ge_env(tmp_dir)                 [LIB_Shell_format_path_names [MOM_ask_env_var "UGII_TMP_DIR"]]
+	if {$lib_ge_env(tmp_dir) == ""} {set lib_ge_env(tmp_dir) $lib_ge_temppath}
+
+	global lib_ge_installed_machines
+	set lib_ge_installed_machines		[info script]
+	set lib_ge_env(installed_machines_dir) 	[LIB_Shell_format_path_names [file dirname $lib_ge_installed_machines]]
+
+	set lib_ge_env(installed_machines_dir,recursively) ""
+	lappend lib_ge_env(installed_machines_dir,recursively) $lib_ge_env(installed_machines_dir)
+
+	set current_dir [pwd]
+	if {![catch {cd [lindex $lib_ge_env(installed_machines_dir,recursively) 0]}]} {
+		if {![catch {set dir [string tolower [glob *]]}]} {
+			foreach e {libraries controller bin} {
+				set index [lsearch -exact $dir $e]
+				if {$index > -1} {
+					set directory [lindex $dir $index]
+					set directory [string toupper [string index $directory 0]][string range $directory 1 end]
+					lappend lib_ge_env(installed_machines_dir,recursively) [LIB_Shell_format_path_names "[lindex $lib_ge_env(installed_machines_dir,recursively) 0]$lib_ge_slash$directory"]
+			        }
+			}
+		}
+	}
+	cd $current_dir
+
+	if {![regexp -nocase -- {\w+} $lib_ge_env(post_pool_dir)]} {set lib_ge_env(post_pool_dir) $lib_ge_env(installed_machines_dir)}
+
+	set lib_ge_env(version_bit)  		[MOM_ask_env_var "UGII_VERSION_BIT"]
+	set lib_ge_env(base_dir)     		[MOM_ask_env_var "UGII_BASE_DIR"]
+
+	set lib_ge_env(major_version)  		[MOM_ask_env_var "UGII_MAJOR_VERSION"]
+	set lib_ge_env(minor_version)     	[MOM_ask_env_var "UGII_MINOR_VERSION"]
+	set lib_ge_env(subminor_version)     	[MOM_ask_env_var "UGII_SUBMINOR_VERSION"]
+
+	if {![info exists lib_ge_dll_version]} {global lib_ge_dll_version}
+	if {$lib_ge_env(minor_version) > 0} {
+		set lib_ge_dll_version "nx$lib_ge_env(major_version)$lib_ge_env(minor_version)"
+	} else {
+		set lib_ge_dll_version "nx$lib_ge_env(major_version)"
+	}
+
+	if {[string match "*windows*" $::tcl_platform(platform)]} {
+		regsub -all "/" $lib_ge_env(base_dir) "\\" lib_ge_env(base_dir)
+	}
+}
+
+#____________________________________________________________________________________________
+# <Internal Documentation>
+#
+# This procedure may be used to format pathnames from unix format in windows
+# format and delete double backslash
+#
+# Output:
+# D:\Temp\mom\debug.out or \\Server\Temp\mom\debug.out
+#
+# e.g.
+# set error [LIB_Shell_format_path_names "D:/Temp/mom/debug.out"]
+#
+# <Example>
+# set error [LIB_Shell_format_path_names "D:/Temp/mom/debug.out"]
+#____________________________________________________________________________________________
+proc LIB_Shell_format_path_names {pathname} {
+
+	global lib_ge lib_ge_platform
+
+	binary scan $pathname H* pathbin
+	if {[info exists lib_ge(format_path,$pathbin,0,0,0)]} {
+		return $lib_ge(format_path,$pathbin,0,0,0)
+	}
+
+	if {[regexp -nocase -- {^[\\\\]|^[\/\/]} $pathname]} {
+		regsub -all "/" $pathname "\\" pathname
+	}
+
+	if {$lib_ge_platform} {
+		regsub -all "/" $pathname "\\" pathname
+		if {![regexp -nocase -- {^\\\\} $pathname]} {set unc 0} else {set unc 1}
+			 while {[regsub -- "(?q)\\\\" $pathname "\\" pathname]} {}
+		if {$unc} {set pathname "\\$pathname"}
+	} elseif {!$lib_ge_platform} {
+		regsub -all "\\\\" $pathname "/" pathname
+		if {![regexp -nocase -- {^//} $pathname]} {set unc 0} else {set unc 1}
+		while {[regsub -- "(?q)//" $pathname "/" pathname]} {}
+		if {$unc} {set pathname "/$pathname"}
+	}
+
+	set lib_ge(format_path,$pathbin,0,0,0) [string trim $pathname]
+	return $lib_ge(format_path,$pathbin,0,0,0)
+
+}
+
+#____________________________________________________________________________________________
+# <Documentation>
+#
+# Handling for the main shell
+#
+# <Example>
+#
+#____________________________________________________________________________________________
+proc LIB_Shell_main {} {
+
+	global lib_ge_env lib_ge_slash
+	global lib_cycle_path sourcefile
+
+	LIB_Shell_environment_handling
+
+	lappend ::lib_ge_monitored_files [LIB_Shell_format_path_names [info script]]
+
+	if {[info commands LIB_GE_source] != "LIB_GE_source"} {
+		set lib_cycle_path 0
+		set searchpath $lib_ge_env(installed_machines_dir,recursively)
+		lappend searchpath $lib_ge_env(post_pool_dir)
+		foreach path $searchpath {
+			if {$lib_cycle_path} {break}
+			foreach ext {.tcl .tbc} {
+				set sourcefile [LIB_Shell_format_path_names "$path${lib_ge_slash}lib_sourcing$ext"]
+				if {[file exists $sourcefile]} {
+					if {[string match ".tbc" $ext]} {
+						MOM_output_to_listing_device "ByteCode Loader is not available, cannot process lib_sourcing$ext (Provid this file not encrypted)"
+						MOM_log_message "ByteCode Loader is not available, cannot process lib_sourcing$ext (Provid this file not encrypted)"
+						MOM_abort "ByteCode Loader is not available, cannot process lib_sourcing$ext (Provid this file not encrypted)"
+					}
+					uplevel #0 {
+
+						if {$::tcl_version >= 8.6} {
+							if {[catch {source -encoding utf-8 $sourcefile} err]} {
+								set lib_source_error 1
+							}
+						} else {
+							if {[catch {source $sourcefile} err]} {
+								set lib_source_error 1
+							}
+						}
+
+						if {[info exists lib_source_error] && $lib_source_error == 1} {
+							if {[info exists ::errorInfo]} {MOM_output_to_listing_device "errorInfo $errorInfo"}
+							MOM_output_to_listing_device "File lib_sourcing $err not loadable"
+							MOM_log_message "File lib_sourcing $err not loadable"
+							MOM_abort "File lib_sourcing not loadable"
+						} else {
+							set lib_ge_debug(lib_sourcing) "$sourcefile"
+							lappend lib_ge_monitored_files "$sourcefile"
+							lappend lib_ge_log_message "\n--> $sourcefile loaded"
+							set lib_cycle_path 1 ; break
+						}
+
+					}
+				}
+			}
+		}
+		if {!$lib_cycle_path} {
+			MOM_output_to_listing_device "File lib_sourcing not found"
+			MOM_log_message "File lib_sourcing not found"
+			MOM_abort "File lib_sourcing not found"
+		}
+	}
+
+	LIB_Shell_init
+
+}
+
+#____________________________________________________________________________________________
+# <Documentation>
+#
+# Handling for the default environment variables
+#
+# <Example>
+#
+#____________________________________________________________________________________________
+proc LIB_Shell_defined_post_environment {} {
+
+	global lib_pp_source_file lib_shell
+
+	#____________________________________________________________________________________________
+	#
+	# NX Post, load files
+	#____________________________________________________________________________________________
+	#
+
+	# There are different ways to source each files
+	#
+	# e.g. Befor LIB_GE_source call
+	# lappend lib_pp_source_file "machine,UGII_CAM_POST_DIR"
+	#
+	# e.g. After LIB_GE_source call
+	# LIB_GE_source "Test" "C:/Temp/;d:/tmp/"
+	#
+	# e.g. To define a searchpath
+	# LIB_GE_source "" "C:/Temp/;UGII_CAM_POST_DIR"
+	# Allowed is the direct path and/or variable
+
+	# This is the call for PB post files
+	# ** internal funktion / Don't remove this line **
+	set lib_pp_source_file ""
+
+	# This is the call the PB post LIB_GE files
+	# ** internal funktion / Don't remove this line **
+	lappend lib_pp_source_file "lib_msg" "lib_file_handling" "lib_standard_post_func" "lib_document"
+
+	# If a XML-file with the same file name found, the referenced files will also loaded
+	LIB_Shell_external_source
+
+	if {![info exists lib_shell(load_loader)] || $lib_shell(load_loader)} {
+		lappend lib_pp_source_file "[file tail [file rootname $::lib_ge_installed_machines]]_custom"
+	} else {
+		MOM_log_message "Custom level isn't loaded"
+	}
+
+
+	#############################################################################################
+
+}
+
+LIB_Shell_main
+
+#############################################################################################
+
+
+
+#############################################################################################
+
+#############################################################################################
+# This is to debug
+#############################################################################################
+if {[llength [info commands LIB_GE_debug]]} {LIB_GE_debug}

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/sim12_turn_2ax_sinumerik_service.def

@@ -0,0 +1,44 @@
+MACHINE TEMPLATE
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

machine/installed_machines/sim12_turn_2ax/postprocessor/sinumerik_PostConfigurator/sim12_turn_2ax_sinumerik_service_s840d.tcl

@@ -0,0 +1,104 @@
+set nondecrypted 1
+proc postcon_initialize_sys_service {} {
+uplevel #0 {
+# ########## SYSTEM VARIABLE DECLARATIONS ##############
+# set mom_sys_cir_vector "Vector - Arc Start to Center"
+# set mom_sys_helix_pitch_type "rise_revolution"
+# set mom_sys_zero "0"
+# set mom_sys_opskip_block_leader "/"
+# set mom_sys_seqnum_start "10"
+# set mom_sys_seqnum_incr "10"
+# set mom_sys_seqnum_freq "1"
+# set mom_sys_seqnum_max "99999999"
+# set mom_sys_lathe_x_factor "1"
+# set mom_sys_lathe_y_factor "1"
+# set mom_sys_lathe_z_factor "1"
+# set mom_sys_lathe_i_factor "1"
+# set mom_sys_lathe_j_factor "1"
+# set mom_sys_lathe_k_factor "1"
+# set mom_sys_leader(N) "N"
+# set mom_sys_cycle_feed_mode "MMPM"
+# set mom_sys_feed_param(IPM,format) "Feed_IPM"
+# set mom_sys_feed_param(IPR,format) "Feed_IPR"
+# set mom_sys_feed_param(FRN,format) "Feed_INV"
+# set mom_sys_contour_feed_mode(ROTARY) "MMPM"
+# set mom_sys_contour_feed_mode(LINEAR_ROTARY) "MMPM"
+# set mom_sys_feed_param(DPM,format) "Feed_DPM"
+# set mom_sys_rapid_feed_mode(ROTARY) "MMPM"
+# set mom_sys_rapid_feed_mode(LINEAR_ROTARY) "MMPM"
+# set mom_sys_feed_param(MMPM,format) "Feed_MMPM"
+# set mom_sys_feed_param(MMPR,format) "Feed_MMPR"
+# set mom_sys_linearization_method "angle"
+#
+# ####### KINEMATIC VARIABLE DECLARATIONS ##############
+# set mom_kin_4th_axis_direction "MAGNITUDE_DETERMINES_DIRECTION"
+# set mom_kin_4th_axis_incr_switch "OFF"
+# set mom_kin_4th_axis_rotation "standard"
+# set mom_kin_5th_axis_direction "MAGNITUDE_DETERMINES_DIRECTION"
+# set mom_kin_5th_axis_incr_switch "OFF"
+# set mom_kin_5th_axis_rotation "standard"
+# set mom_kin_clamp_time "2.0"
+# set mom_kin_cycle_plane_change_per_axis "1"
+# set mom_kin_cycle_plane_change_to_lower "1"
+# set mom_kin_flush_time "2.0"
+# set mom_kin_linearization_flag "1"
+# set mom_kin_linearization_tol "0.01"
+# set mom_kin_max_dpm "10000"
+# set mom_kin_max_fpm "15000"
+# set mom_kin_max_fpr "1000"
+# set mom_kin_max_frn "1000"
+# set mom_kin_min_dpm "0.0"
+# set mom_kin_min_fpm "0.1"
+# set mom_kin_min_fpr "0.1"
+# set mom_kin_min_frn "0.01"
+# set mom_kin_pivot_gauge_offset "0"
+# set mom_kin_rapid_feed_rate "10000"
+# set mom_kin_retract_distance "500"
+# set mom_kin_rotary_axis_method "PREVIOUS"
+# set mom_kin_tool_change_time "0.0"
+# set mom_kin_x_axis_limit "1000"
+# set mom_kin_y_axis_limit "1000"
+# set mom_kin_z_axis_limit "1000"
+}
+}
+postcon_initialize_sys_service
+
+CONF_CTRL_moves set decompose_first_move 0
+
+CONF_CTRL_moves set return_before_first_tool_change_pos {{}}
+
+CONF_CTRL_moves set return_tool_change_pos {{}}
+
+CONF_CTRL_setting set x_factor 2
+
+CONF_SPF_file set create_cse_ini_file 1
+
+CONF_SPF_file set output_unit_to_ini 4
+
+CONF_SPF_warning set no_warningoutput {{SMALL ARC; ABORTED TO LINEAR MOVE}}
+
+set ::mom_sys_home_pos(0) 533.400000
+set ::mom_sys_home_pos(1) 0.000000
+set ::mom_sys_home_pos(2) 2114.550000
+
+
+proc ootb_convert_home_pos {} {
+# This proc is used to convert mom_sys_home_pos to inch ane metric units.
+   if {[info exists ::mom_sys_home_pos(0)]} {
+      set ::mom_sys_home_pos_metric(0) $::mom_sys_home_pos(0)
+      set ::mom_sys_home_pos_metric(1) $::mom_sys_home_pos(1)
+      set ::mom_sys_home_pos_metric(2) $::mom_sys_home_pos(2)
+
+      set ::mom_sys_home_pos_inch(0) [expr $::mom_sys_home_pos_metric(0)/25.4]
+      set ::mom_sys_home_pos_inch(1) [expr $::mom_sys_home_pos_metric(1)/25.4]
+      set ::mom_sys_home_pos_inch(2) [expr $::mom_sys_home_pos_metric(2)/25.4]
+
+      unset ::mom_sys_home_pos(0)
+      unset ::mom_sys_home_pos(1)
+      unset ::mom_sys_home_pos(2)
+   }
+}
+
+#This command must be called at very end of ootb service layer.
+ootb_convert_home_pos
+

machine/installed_machines/sim12_turn_2ax/sim12_turn_2ax_fanuc.dat

@@ -0,0 +1,3 @@
+2-Ax_Turn_Vertical_PC,${UGII_CAM_LIBRARY_INSTALLED_MACHINES_DIR}sim12_turn_2ax\postprocessor\fanuc_PostConfigurator\sim12_turn_2ax_fanuc.tcl,${UGII_CAM_LIBRARY_INSTALLED_MACHINES_DIR}sim12_turn_2ax\postprocessor\fanuc_PostConfigurator\sim12_turn_2ax_fanuc.def
+CSE_FILES, ${UGII_CAM_LIBRARY_INSTALLED_MACHINES_DIR}sim12_turn_2ax\cse_driver\fanuc\sim12_turn_2ax_fanuc.MCF
+

machine/installed_machines/sim12_turn_2ax/sim12_turn_2ax_sinumerik.dat

@@ -0,0 +1,3 @@
+2-Ax_Turn_Vertical_PC,${UGII_CAM_LIBRARY_INSTALLED_MACHINES_DIR}sim12_turn_2ax\postprocessor\sinumerik_PostConfigurator\sim12_turn_2ax_sinumerik.tcl,${UGII_CAM_LIBRARY_INSTALLED_MACHINES_DIR}sim12_turn_2ax\postprocessor\sinumerik_PostConfigurator\sim12_turn_2ax_sinumerik.def
+CSE_FILES, ${UGII_CAM_LIBRARY_INSTALLED_MACHINES_DIR}sim12_turn_2ax\cse_driver\sinumerik\sim12_turn_2ax_sinumerik.MCF
+